1) release agent
脱模剂
1.
On the application of release agent in concrete maintenance;
浅谈混凝土养护中脱模剂的应用
2.
A silicone oil release agent was prepared from D_4、MM, etc.
采用八甲基环四硅氧烷(D4)、六甲基硅氧烷(MM)等主要原料制备了硅油脱模剂。
3.
A summary and different kinds of release agent both at home and abroad and mechanism of mold release as well as some common used mold release methods are presented.
介绍了国内外脱模剂的概况、种类、脱模的基本机理和常用的脱模处理方法。
2) release agent
离型剂
1.
The release agent was blended with film forming substance and surface active agent after nano-SiO_2 was pretreated to improve the dispersed character.
通过对纳米S iO2先进行预处理改善分散性,再加入成膜物质和表面活性剂制得的离型剂,其固化性、稳定性较好,涂布于PET基材薄膜上,测得单位面积油墨残留率小,说明该乳液起到离型作用。
2.
The mutual interaction among the lipid surfactant,polymethyl methacrylate,and inorganic solid particles in packaging thermal transfer process release agent was studied by measurement of centrifuge.
通过离心测试的方法研究了包装热转印离型剂中表面活性剂-聚甲基丙烯酸甲酯(PM-MA)-无机固体微粒三者之间的相互作用。
3.
The microcosmic influence of liqid surfactant on release agent was analyzed with theory of soft substance and the entropy.
通过软物质和熵理论对表面活性剂在离型剂中的微观影响进行分析。
3) release agent
剥离剂
1.
The effects of crosslinking agent and release agent on softening point, melt index and temperature of viscous flow were discussed; The effects of color agent on charging property was investigated as well.
讨论了交联剂、剥离剂对色粉软化点、熔体指数、粘流温度的影响;对着色剂对色粉荷电性能的影响及与树脂分子间的作用进行了分析。
2.
In this paper the high performance release agent CE-04 was applied to the base sheet to obtain high gloss and make the coating layer easily attaching to the surface of cast drum under wet condition, and also provide excellent releasing ability of paperboard from cast drum under dry condition,thus improve runnability and efficiency of paper machine.
通过采用性能良好的CE-04剥离剂,使纸张涂层在湿状态下容易粘结在铸涂缸表面,形成很高 的纸面光泽度,而干燥后又赋予纸张卓越的剥离性能,从而提高了纸机的操作性能和生产效率;同时选 择了恰当的加入点,避免了铸涂卡纸因发生粘缸而引起的麻坑点、针孔等纸病,提高了成纸品质。
3.
This paper introduced the working principle of a release agent and an creping adhesive agent, as well as their application in BF 12 tissue paper machine.
介绍了剥离剂和黏合剂的作用原理及其在BF12卫生纸机中的应用。
4) release agent
隔离剂
1.
In this paper, the release agent of RTV silicone which was composed of solvent, silicone rubber, coupling agent and catalyst was explained.
本文对溶剂型有机硅隔离剂的溶剂与硅橡胶,偶联剂和催化剂等进行了论述。
5) release agent
脱离剂
6) release agent
解脱剂
补充资料：脱模剂
分子式：
CAS号：
性质：用于混凝土浇注前涂抹在施工用模板上，以使浇注后模板不致粘在混凝土表面上不易拆模，或影响混凝土表面的光洁度。其主要作用为在模板与混凝土表面形成一层膜将两者隔离开故又称隔离剂。其主要成分为乳化脂肪酸。或者其他乳化油类。表观为白色乳状液。
CAS号：
性质：用于混凝土浇注前涂抹在施工用模板上，以使浇注后模板不致粘在混凝土表面上不易拆模，或影响混凝土表面的光洁度。其主要作用为在模板与混凝土表面形成一层膜将两者隔离开故又称隔离剂。其主要成分为乳化脂肪酸。或者其他乳化油类。表观为白色乳状液。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。