1) Zn-Ni alloy
锌镍合金
1.
A glow discharge spectrometer(GDA-750) and a scanning electron microscope(Hitachi S-S70 SEM) were used to investigate the effects of the electroplating processing parameters on the Ni content,thickness,and appearance of the Zn-Ni alloy coating.
通过正交试验方法,采用新的添加剂和配位剂实现了锌镍合金电镀,优选出了新的锌镍合金电沉积工艺和镀液配方。
2.
Ammonium-free weak acidic electroplating technology for Zn-Ni alloy was developed.
研究了一种无铵弱酸性锌镍合金电镀工艺,并深入探讨了镀液的成分及工艺条件对镀层含镍量的影响,得到了镀层为γ相Ni5Zn21与δ相Ni3Zn22、且含镍量为13%的全光亮锌镍合金镀层,确定了电镀工艺规范。
3.
In this article,the effects of rare earth on Zn-Ni alloy electroplating from sulfate bath have been studied.
研究了稀土在硫酸盐体系电镀锌镍合金中的作用。
2) Zinc-nickel alloy
锌镍合金
1.
Selection of complexing agents for cyanide-free alkaline zinc-nickel alloy electroplating;
无氰碱性锌镍合金电镀中配位剂的选择
2.
Studies on white chromating of zinc-nickel alloy electrodeposited from alkaline bath;
碱性锌镍合金电镀白钝化工艺的研究
3.
Formula of Zinc-nickel alloy electroplatings from high ammonium chloride and weak acidic solutions was presented.
提出了连续电镀锌镍合金的高氯化氨 弱酸型镀液工艺参数 ,对镀液成分、pH值、温度、阴极电流密度对镀层镍含量的影响及连续电镀锌镍合金的镀速控制等问题进行了研究。
3) Zn-Ni alloy
锌-镍合金
1.
The technology of low hydrogen embrittlement Zn-Ni alloy electroplating on aeronautic high strength steel was studied.
对航空高强钢低氢脆电镀锌-镍合金工艺进行研究。
2.
While a large number of methods of determining contents of Zn and Ni in acidic Zn-Ni alloy plating bath was reported, few of methods for determining Zn and Ni in alkaline Zn-Ni alloy plating bath were reported.
酸性锌-镍合金镀液中锌、镍的测定方法报道很多,而碱性镀液中锌、镍的测定报道很少。
3.
The property of the coating is identical with electroplating Zn-Ni alloy coating in ammoniate.
研制成功一种钾盐无援电镀锌－镍合金新工艺。
5) nickel-zinc alloy electropalting
镀镍-锌合金
6) tin-zinc-nickel alloy
锡锌镍合金
1.
A decorative tin-zinc-nickel alloy electroplating process as an alternative to nickel plating was studied.
结果表明:该工艺操作方便,镀液分散能力和覆盖能力好,所得锡锌镍合金镀层结晶细致,光亮,类似镍层,其耐蚀性明显优于锌镀层,适用于钢铁件高耐蚀装饰性电镀。
2.
Alkaline electroplating bath of tin-zinc-nickel alloy technology,acceptable alternatives to nickel coatings,was researched comprehensively by the paper.
实验结果表明:该工艺操作方便,镀液分散能力和复盖能力好,所得锡锌镍合金镀层结晶细致、光亮,类似镍层,其耐蚀性明显优于锌镀层,适用于钢铁件高耐蚀装饰性电镀。
补充资料：金银铜锌镍合金
分子式：
CAS号：
性质： 金含银、铜、锌和镍的多元白色K金钎料合金，锌和镍具有漂白作用。用熔炼和压力加工法制造。用作钎料，钎接白色K金合金饰品。
CAS号：
性质： 金含银、铜、锌和镍的多元白色K金钎料合金，锌和镍具有漂白作用。用熔炼和压力加工法制造。用作钎料，钎接白色K金合金饰品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条