说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脉冲宽度
1)  pulse width
脉冲宽度
1.
Measurement of capacitance by pulse width method and the choice of constant-current source;
脉冲宽度法测电容及恒流源的选取
2.
The measurement of ultrashort pulse width using a simple autocorrelator;
简易自相关仪对飞秒激光脉冲宽度的测量
3.
The influence of pulse width on transient thermally induced optical nonlinearities in a Kerr nonlinear medium~*;
克尔介质中脉冲宽度对瞬态热光非线性效应的影响
2)  pulse duration
脉冲宽度
1.
Influence of pulse duration on deflecting electric field inner surface plasma immersion ion implantation;
脉冲宽度对偏转电场法内表面等离子体浸没离子注入的影响
2.
Realization of the circuit measuring continuous pulse duration in pulse series;
脉冲序列中连续脉冲宽度测量电路的实现
3.
Picosecond pulse duration measurement using non-collinear single-shot autocorrelator
单发次皮秒脉冲宽度的二阶自相关法测试
3)  pulsewidth
脉冲宽度
1.
Using Q-Switching rate equation,from the viewpoint of internal relations between the gain of active medium and the loss of resonator,the influence the multiparameters of resonator on pulsewidth are explicated.
利用调Q速率方程,从工作物质的增益和谐振腔的损耗之间的内在关系出发,论述了谐振腔内多个可变参数对激光器输出脉冲宽度的影响。
2.
Using Q-Switching rate equation,from the viewpoint of internal relations between the gain of active medium and the loss of resonator,the influence the multipararneters of resonator on pulsewidth are explicated.
利用调 Q 速率方程,从工作物质的增益和谐振腔的损耗之间的内在关系出发,论述了谐振腔内多个可变参数对激光器输出脉冲宽度的影响。
4)  impulse width
脉冲宽度
5)  width-pulse
宽度脉冲
6)  duration of impulse
脉冲宽度脉宽度
补充资料:板带宽度测量


板带宽度测量
width measurement of plate and strip

  薯 光电测宽原理图 1一光源;2一被测板带;3一给定丝杆;4一图像传感器; 5一电机;6一码盘;7微处理机;8一操作盘 对于尺寸较小的板带宽度(或厚度和长度),可以用单个光电摄像传感器进行测量。当CCD元件不选用线性组件而选用面形组件时,配以相应的信号处理系、统,可以测量被测体的外形尺寸,可以作为摄像机加以显像。banda一kuandu ee}旧ng板带宽度测量(width mensurement of plateand strip)指板带宽度尺寸的在线测量。在大多数情况下,用光电测宽仪测量轧机出口处板带材的宽度,作为轧机控制或控制模型的信号源,有宽度显示作为操作人员所需的工艺参数,在精整剪切线上作为剪切控制的信号源。 光电测宽方式原理如图所示。常用的仪表有光电扫描式和光电摄像式两类。它们的测量范围为50。~22oomm,测量精度达士0.1%。前者光学机械较多,结构较复杂;后者结构较简单,可靠,维护量小。二者的不同点在于图像传感器的不同。光电摄像传感器使用光藕合器件(C CD)作为信号接受元件(见轧件直径测量),每个光电摄像传感器由CCD接收器件、光学镜头、时序电路和信号处理电路等组成。传感器装在被测板的上方,被测板下方放置背底光源,如果被测板的温度在900‘c以上时也可不用背底光源。根据光学成像原理,被测板边缘清晰地成像在CCD元件下。每个摄像传感器测量的宽度值连同设定宽度值进行数据处理,即可求得被测板的实际宽度值。(见彩图插页第39页)用CCD元件组成的测量仪表还在发展,以提高测量精度、分辨率以及增加功能、配备图像显示等为目标。 〔申敬府朱德芳〕
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条