说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 疲劳性能
1)  Fatigue Property
疲劳性能
1.
Effects of Sr addition on thermal stability and fatigue property of AZ91 magnesium alloy;
Sr对AZ91镁合金热稳定性及疲劳性能的影响
2.
Icfluence of Non-Metallic Inclusion and Surface Condition on Fatigue Property of High Strength Spring Steel;
非金属夹杂物和表面状态对高强度弹簧钢疲劳性能的影响
3.
Research on fatigue property of reinforced concrete beams with recycled coarse aggregate;
再生粗骨料钢筋混凝土梁疲劳性能试验研究
2)  fatigue performance
疲劳性能
1.
Fatigue Performance of the Hydraulic Expanded Tube-to-Sheet Joints;
换热管与管板液压胀接接头的疲劳性能
2.
Asphalt mixture constituent structure optimization based on fatigue performance;
基于疲劳性能的沥青混合料组成优化
3)  fatigue properties
疲劳性能
1.
Experimental comparision of fatigue properties for 5A06 aluminium alloy friction stir and metal inert-gas welded joints;
铝合金搅拌摩擦与MIG焊接接头疲劳性能对比试验
2.
Improvement of fatigue properties of welded joints for titanium alloy by ultrasonic peening method;
超声冲击法对钛合金焊接接头疲劳性能的改善
3.
Effect factors of asphalt mixtures fatigue properties by grey relation degree theory;
沥青混合料疲劳性能影响因素的灰关联分析
4)  Fatigue Behavior
疲劳性能
1.
Experimental Study on Fatigue Behavior of RC Beams Strengthened with High Performance Ferrocement Laminate;
高性能水泥复合砂浆钢筋网薄层加固RC梁疲劳性能试验研究
2.
Fatigue tests were made on rubber specimens reinforced with aramid cord made of coated aramid yam to investigate the effect of different coating on fatigue behavior of aramid yam and cord combined with rubber.
从宏观的角度研究了芳纶纤维涂覆纱增强橡胶疲劳性能,采用橡胶疲劳试验机,对用芳纶纤维涂覆纱制成的芳纶线绳增强的橡胶试样进行曲挠、拉伸交变作用下的疲劳试验,研究不同涂覆处理的芳纶纤维纱和芳纶线绳与橡胶结合后的疲劳性能之间的关系。
3.
Fatigue behavior of 40Cr steel obtained by ultrasonic high-frequency fatigue testing method is usually larger than that by conventional low frequency testing.
用超声高频疲劳试验方法获得的40Cr钢和50车轴钢的疲劳性能大于常规低频疲劳试验结果,表明超声加载频率对疲劳性能存在影响,这种影响可归因于应变速率的影响。
5)  fatigue [英][fə'ti:ɡ]  [美][fə'tig]
疲劳性能
1.
By adding SBS and GF into ABS,and testing the fatigue properties of the annular specimen,the article mainly analyzes the influence of different filler for ABS.
采用ABS/SBS和ABS/GF材料成型了圆环状试样,使用了自行设计的试验装置对环状试样进行疲劳试验,分析比较在环状下不同填料对ABS的疲劳性能的影响。
2.
Nano-impact tests were carried out to investigate the anti-fatigue properties of the films.
采用原子力显微镜观察薄膜表面形貌,采用激光拉曼光谱仪对薄膜的结构进行分析,采用多功能纳米力学性能测试仪测定薄膜的硬度、弹性模量及耐疲劳性能,采用微摩擦磨损试验机考察薄膜的摩擦磨损性能。
3.
The effect of 13 surface modifier of filler on the fatigue properties of NR/BR vulcanizates and the microstructure change of NR/BR vulcanizates modified with coupling agent during fatigue were studied.
研究了 13种白炭黑表面改性剂对 NR/BR硫化胶疲劳性能的影响 ,分析了偶联剂改性白炭黑填充硫化胶疲劳过程中微观结构的变化及其对疲劳性能的影响。
6)  fatigue behaviour
疲劳性能
1.
Besides satisfying HRB400 in GB1449-1998,the hot-rolled reinforcing steel has excellent propertise such as brittle transition temperature being lower than -40?℃,good deformation-resistance ageing and fatigue behaviour under high deformation and low recycle.
系统的研究了热轧带肋钢筋 2 2MnSiV各项性能 ,其各项性能不仅达到GB14 4 9— 1998中HRB4 0 0的要求 ,还有其特性 :脆性转变温度低于 - 4 0℃、抗形变时效 ,高应变低周疲劳性能好。
补充资料:复合材料疲劳性能


复合材料疲劳性能
fatigue properties of composites

复合材料疲劳性能fatiguePr叩erties。f。omPo-sites复合材料承受交变应力或交变应变的能力。通常以疲劳强度或相应的寿命曲线表征。复合材料的疲劳性能与材料组分、铺层方式、应力状态、作用频率及环境条件等有密切关系。一般认为,在主承力方向有足够的纤维,耐热性或韧性较好的复合材料可得到较高的疲劳强度。复合材料的基体和增强体不同,其疲劳性能可以有较大差异。 复合材料的应力寿命曲线(S一N曲线)大多呈平缓倾斜直线,应力水平下降则寿命次数增加,但没有金属材料的明显平台。因此,在说明复合材料的疲劳强度时,常用经若干交变次数后的疲劳强度值,即条件疲劳极限。 复合材料的疲劳破坏过程是一种不可逆的损伤累积过程。常用材料的某些特性变化,如刚性或强度减弱等来表征疲劳损伤程度。以复合材料变色、发响、脱胶、分层及纤维断裂来描述其损伤产生与扩大。也有用微裂纹的扩散解释损伤引起的材料承载面积缩小和由此引起的疲劳破坏。复合材料疲劳破坏断口常呈不规则交错状,没有某些金属常有的那种光滑疲劳源。对复合材料疲劳性能的研究,有助于对复合材料使用寿命进行预测。常用方法有剩余强度法、特性(E,a)降级法及损伤速率法等。 复合材料有良好的耐疲劳性能,如有较高的疲劳强度,对缺口不那么敏感,阻尼较大及性能可设计性等。因此,这种材料广泛应用于航空、汽车等工业领域。 (周国寅)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条