说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 误差
1)  error [英]['erə(r)]  [美]['ɛrɚ]
误差
1.
Photoelectronic length measuring system for steel pipe and error analysis;
钢管光电测长系统及误差分析
2.
Ways of automatic pipe length measurement and its error analysis;
钢管自动测长的误差分析及解决
3.
Discussion on Tobacco Cut Width Error of RC4 Cutter;
RC4切丝机切丝宽度误差分析
2)  errors [英]['erə]  [美]['ɛrɚ]
误差
1.
Errors Derived from Machine Compliance and Contribution to the Evaluated Values by Indentation Testing;
仪器柔度对压入法测试结果的误差影响与校准
2.
The Sources of Errors and Solutions in the Numerical Control Process;
数控加工中误差的来源及解决方法
3.
Calculations of Locating errors in Fixture Design;
夹具设计中定位误差的计算
3)  deviation [英][,di:vi'eɪʃn]  [美]['divɪ'eʃən]
误差
1.
An Analysis to Deviation of the Measurement of Copper Content in Jetfuel;
喷气燃料中铜含量测定的误差分析
2.
This paper specifies the meaningfulness and measurement method of rotating machinery alignment and points out the main deviation factors of dial indicator alignment and its control method.
简述了旋转机械对中的意义和测量方法,指出了百分表对中法的主要误差因素及其控制方法。
3.
Analyses are made on some major factors affecting twist deviations and the relevant estimations, with measures to narrow twist deviations suggested.
分析了几种引起捻度误差的主要因素和其误差估算方法 ,并提出了减小捻度误差的办法。
4)  Tolerance [英]['tɔlərəns]  [美]['tɑlərəns]
误差
1.
Analysis of tolerance characteristics of imitating arc with an cubic parameter line;
三次参数曲线拟合圆弧段的误差特性分析
2.
Minish tolerance of thermistor win-speed sensor by instrumentation amplifier
仪表放大器对热敏电阻风速传感器的误差改进
3.
Introduce a try to grind precision spherical crown, including its principle and method, discuss the possible tolerance and give a formula to control the quality.
介绍了为磨削高精度球冠所做的尝试,阐述了所采用的磨削原理、技术方案,讨论了加工误差,推导了控制球面轮廓误差的公式。
5)  error margin
误差
1.
By using the measurement indetermination,a mersurement error margin is used.
用测量不确定度来表示测量误差的方法,是科技交流和国际贸易的迫切要求。
2.
This text explains to Xutuan coal mine west breeze well and main well a method,error margin for of run-through measuring analysis with anticipate.
介绍了许疃煤矿西风井与主井之间的贯通测量的方法、误差分析和预计。
3.
Methods99 healthy student acted as volunteers for the test and the height of crutches was estimated with error margin of linear regression.
方法选择 99名健康学生为试验对象 ,其中男性 5 0名、女性 49名 ,用分散分析中的误差值预测腋拐长度及扶手高度。
6)  mistake [英][mɪ'steɪk]  [美][mə'stek]
误差
1.
During the protess of elecrospark wireelectrode cutting,step motor makes mistakes because of outof synchronism,which will affect accuracy of process directly.
电火花切割加工中 ,步进电动机失步产生误差 ,直接影响加工精度。
2.
The methods to calculate the actual mistake of tunnels perforation: survey columal method, underground wire control method was introduced in this paper, and then it narrated how to adjust these mistakes.
本文介绍了测定隧洞贯通实际误差的方法:测中桩法;地下导线控制法。
补充资料:误差
误差
error
    数据的近似值与准确值的差异。衡量数据可靠性和精确度的重要方面。求解一个具体问题,一般首先要将问题的条件简化,然后建立一个数学模型,再应用某种合理的算法求出模型问题的数值结果。这些最后求得的结果往往只是原先问题准确解的近似,两者间的差异就是误差。样本平均与总体平均之差是误差的最普遍的例子。近似值与准确值之差称作误差或绝对误差,而绝对误差与准确值之比称为相对误差。百分比误差是相对误差的百分比表示。绝对误差和相对误差的上界分别称作绝对误差界和相对误差界。这些概念表达了近似值的精确程度。造成误差的原因是多方面的,除了人为原因外,主要有以下4个方面的来源:① 由于模型的局限与近似造成的误差称为模型误差。②由于观测工具不准确和随机因素干扰引起的误差叫做观测误差。③由于简化数学计算,用近似表达式代替精确表达式引起的误差称为截断误差。④由于计算机字长的限制,把位数较多的数用位数较少的数代替(通常用四舍五入法则),由此产生的误差称作舍入误差。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条