1) Slide plate
滑板
1.
Remold of hydraulic control system for ladle slide plate in steel-making works;
炼钢厂大包滑板液压控制系统的改造
2.
The slide plate with 2% apparent porosity was prepared in a composition of 80%～90% tabular corundum and 20%～10% metal aluminum with nitridation (1100℃) and oxidation on the plate surface (800℃).
由80%～90%板状刚玉及20%～10%金属铝组成的坯料经氮化处理(温度1100℃)后,再进行表面氧化处理(温度800℃),可制得显气孔率为2%的Al?AlN?Al2O3滑板材料,其1400℃高温抗折强度高达48。
3.
The experiments show that the slide plate is of compact structure because of the molten Al fill in the gaps of corundum grains and t.
以其作为钢包滑动水口的滑板材质,取得了良好的应用效果。
2) sliding plate
滑板
1.
Hydration and pulverization of fired alumina-zirconia-C sliding plates
烧成铝锆碳滑板的水化粉化机理探析
2.
The bracket's sliding plate used as the rolling mill's spindle in the light-medium section workshop of the Bar Plant was transformed three times after its imported sliding plate lost efficacy,but not showing satisfactory effect.
棒材厂中小型车间轧机接轴使用的托架滑板长期受到磨擦力与冲击力的作用,在进口滑板失效后先后进行三次国产转化,未取得满意效果。
3.
The contrast experiment of slag resistance for Al-AlN-Al_2O_3 sliding plate and Al_2O_3-C sliding plate was carried out by means of crucible method under the conditions of 1 600 ℃ for 3 h and 1 650 ℃ for 3 h.
对Al AlN Al2O3滑板与Al2O3 C滑板在1 600 ℃×3 h及1 650 ℃×3 h条件下,进行了坩埚法抗钢渣侵蚀实验。
3) slider
[英]['slaidə] [美]['slaɪdɚ]
滑板
1.
Study on Composition and Technology of Carbon-based Composite Slider;
碳基复合材料滑板成分及工艺研究
2.
The novel slider is developed by the means of powder metallurgy inorder to meet the requirements of the mixed field of aluminum twisting wire and steel-aluminum wire in electrification railoway.
针对钢芯铝绞线与铝包钢线混架区的特殊要求,用粉末冶金方法研制新型受电弓滑板,分析结构、烧结温度及成分对滑板性能的影响,并将新研制的滑板与厂方原用滑板进行对比分析。
3.
The effects of rare-earth elements and zinc on copper matrix slider made by powder metallurgy are investigated.
研究稀土和锌对铜基粉末冶金滑板的影响。
4) slide
[英][slaɪd] [美][slaɪd]
滑板
1.
Carrying current abrasion experiment and performance analysis of metallurgic slide with double lubricative copper base powder;
双润滑铜基粉末冶金滑板载流磨耗试验与分析
2.
Study on Novel Carbon-based Composite Pantograph Slide for Electric Locomotive;
新型电力机车受电弓碳基复合材料滑板研究
3.
The slide repairing and reusing technology is developed in the steel-making plant of Laigang.
莱钢炼钢厂开发了滑板修复再利用技术,选用电熔刚玉复合材料作芯体,以高附着性、防氧化的表面特殊涂料涂抹滑板表面,并严格加工工艺和检验标准。
5) contact strip
滑板
1.
Effect of impregnation by silicon oil on arc erosion resistance wear of resin-matrix contact strip against copper;
硅油浸渍对树脂基滑板/铜抗电弧侵蚀磨损性能的影响
2.
The method for installing carbon-based contact strips on pantograph heads is very important from the operational points of view.
从运用的观点来看,受电弓弓头碳基滑板的安装方法是非常重要的。
6) slipper
[英]['slɪpə(r)] [美]['slɪpɚ]
滑板
1.
Dynamic Detecting Pantograph Slipper Profile Condition Based on Digital Image Process;
受电弓滑板外部状态图像检测
2.
Comprehensive Review on the Field Measurement Techniques of Pantograph Slipper Abrasion;
受电弓滑板磨耗现场检测技术综述
补充资料：滑板
| 滑板 skateboarding 一种体育游戏。脚踩装有轮子的小板在坚硬地面上滑行。滑板形似冲浪板，由板面、2个轮架和4个轮子组成。板面用玻璃纤维、聚丙烯或硬木制成。板长50～84厘米，宽14～16厘米，轮子宽约4厘米，直径为6厘米。滑板运动兴起于美国加利福尼亚州。最初人们受冲浪运动的启发，在短冲浪板上安上轮子做滑行游戏。后来，芝加哥滑轮公司开始生产滑板。1962年滑板运动已相当普及，1965年开始举办滑板正式比赛。1977年加利福尼亚建立了“滑板世界”，专供滑板爱好者活动。70年代末，滑板运动传到了日本、南非、沙特阿拉伯和欧洲大部分国家，并有了世界性的比赛。90年代初，滑板运动传入中国。滑板运动有自由滑和速度滑两种，可在平坦的柏油路上进行，也可在斜坡上下滑。专供滑板运动用的场地呈“V”字形。滑板动作有大回转、小回转、90°转体、跳转180°等，或双脚踩在板尾，翘起板头用两个轮子滑行；或一人踩两个滑板，一只脚踩板头，一只脚踩板尾滑行；还可在滑板上做倒立、单脚支撑滑行等。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条