说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 磨粉机
1)  rollermill
磨粉机
1.
The researches on rollermill' s power,grinding force and roll pressure;
磨粉机功率、研磨力和辊间压力的研究
2.
The height parameters of the micro salience profile on the roughened surface of smooth rolls were discussed, and the surface roughness of the smooth rolls of rollermills MDDL100 and MDDK100, the newly applied products from Bühler, were tested, with an approach to the relationship between the values R a and Rz of the dull surfaces of the smooth rolls.
阐述了心磨光辊粗糙度的高度参数 ,并对新投产的引进瑞士布勒公司的MDDL和MDDK型磨粉机的光辊表面粗糙度进行了测试 ,探索了光辊无泽面粗糙度Ra 值与Rz 值的相互关系。
3.
Several methods for extending the service life of tooth-wedge belts are discussed in the light of the application of such belts in the driving systems of rollermills, their design, manufacturing, routine adjustment and maintenance.
就齿楔带在磨粉机传动系统的应用 ,从设计、制造到日常的调整、维护 ,详细论述了延长齿楔带使用寿命的几个方法。
2)  grinding machine
磨粉机
1.
It analyses the working operation of the high-speed grinding machine and the influence of the parameters.
论述了采用高速旋转的超硬轮对物料进行磨损剥离制粉过程,分析了高速砂轮磨粉机工作原理和各参数的影响,为今后进一步研制和开发系列新型高速砂轮磨粉机提供了有用的依据。
2.
With the adoption of pulverization principle of shearing,DG series of double-refiner discs grinding machines were developed.
采用剪切式粉碎原理,开发了DG系列双盘式磨粉机
3.
With the adoption of pulverization principle of shearing, DG-350 double-refiner disc special type grinding machine is developed to satisfy the requirements of special powder preparation.
为满足特种粉体制备的需要,采用剪切式粉碎原理,研制出DG-35型双磨盘式特种磨粉机
3)  roller mill
磨粉机
1.
Maintenance and protection of roller mill;
辊式磨粉机的维护和保养
2.
Set feeding trajectory and infeeding speed as multiple target functions and take horizontal distance and vertical distance between feeding roller and fast roller, rotational speed and diameter of feeding roller and inclined angle between the fast roller and slow roller as design parameters, Particle Swarm algorithms and MATLAB were used in the optimization design of roller mill.
采用粒子群算法和Matlab语言,以磨粉机的分流辊与快辊的水平距离及垂直距离、分流辊的转速及直径、快慢辊的斜置角度作为设计变量,以物料的喂料轨迹和物料的入磨速度作为多目标函数进行优化设计。
3.
Detailed analysis is made for the feeding non-uniformity phenomena frequently occurred in the feeding system of a break roller mill, and specific settlement methods for them are set forth.
磨粉机皮磨系统经常出现的几种喂料不匀现象作了详细的分析 ,并提出了具体解决方法。
4)  mill [英][mɪl]  [美][mɪl]
磨粉机
1.
Several typical fixing methods for mill roller are analysed: tightening sleeve between roller shaft and bearing is suitable for small-sized mill with low cost; the roller shaft with taper has high transmission precision, but difficult to manufacture; shrink fitting of roller shaft and bearing is suitable for middle-sized mill which has high requirement for precision and with quite low cost.
从不同的角度分析了几种典型的磨粉机磨辊固定方式:磨辊轴与轴承间采用紧定套的连接方式适合用于低成本的小型单式磨粉机;磨辊轴带锥度的连接传动精度高,制造难度大;磨辊轴与轴承过盈配合连接方式比较适合于要求运转精度较高而成本较低的中型磨粉机
2.
By means of analysis aimed at faults mill are easy to generate, the thesis designs .
磨粉机是粉体生产加工行业的重要装备,由于其通常工作在高粉尘,大噪声的环境中,加之自身大负载的工作特点,极容易出现各类故障。
5)  flour mill
磨粉机
1.
In this thesis, the development of a fully electrical control system for flour mill is presented.
本文阐述了磨粉机全电控系统的研制开发,系统主要包括电动离合闸闭环控制装置和带有喂料测速的自动喂料闭环控制装置,能够全中文显示。
6)  machine for grinding and paste
磨粉磨浆机
补充资料:磨粉机
      粮食加工机械的一种,用于把粒状粮食研磨成粉状粮食。常用的是将小麦研磨成面粉的辊式磨粉机。
  
  磨粉机根据磨辊的数量可分单式和复式(见图)两种。单式磨粉机有一对水平磨辊。齿辊的应用范围较广,光辊仅用于将胚乳研磨成粉。多数磨粉机的两辊轴线具有高度差,并以不同的速度相向旋转,轴线较高的磨辊线速度较快,常用6~7.5米/秒。动力通过传动装置驱动快辊,再由快辊通过滚子链带动慢辊旋转。两辊的线速度比:齿辊约为2.5:1;光辊约为1.25:1。粮食由料斗通过喂料活门和一对喂料辊均匀地喂到一对磨辊的工作区,在磨辊的挤压和剥刮作用下碾碎。为保持磨辊的良好性能,在齿辊下方装有毛刷、光辊下方装有刮刀等清理装置。并采用液压或气压装置,在喂料开始和停止时自动操作两辊的合拢和松开,慢辊两端设有螺旋弹簧套筒机构,以保持轧距不变,使进入两辊间的物料承受一定压力。若有较大异物通过两辊时,慢辊能自动松开,不致损坏磨辊及其他部件。复式磨粉机的两对磨辊各有其独立的喂料机构和传动机构,以加工不同的粮食物料。其作业原理同单式磨粉机基本相同。
  
  
  辊式磨粉机的发展趋向是简化结构,提高磨粉的质量和自动化水平。其改进措施包括今后将采用齿形胶带代替滚子链传动磨辊,用气动装置取代电磁传感器传递喂料信息,改进气动松合闸,以增强气缸的吸振能力,结合使用简单的磨辊限位装置代替复杂的弹簧套筒机构、平行度调节机构和轧距总调机构以及采用气力喂料以提高生产率等。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条