1) VLS method
气-固-液法
2) Vapor-liquid-solid method
气-液-固法
1.
Advances of vapor-liquid-solid method used for semiconductor nanowire growth;
气-液-固法在半导体纳米线生长中的应用
3) gas-liquid-solid
气-液-固
1.
According to the phase change law for wax deposition and dew point line curves,and the change of the saturation of condensate gas with phase properties,gas-liquid-solid was transformed with phase change,which would result in the change of distribution of fluid pressur.
含蜡凝析气藏开采过程中伴有凝析液、蜡析出呈气-液-固变相态多相复杂流动。
2.
A fluidized-bed evaporator for gas-liquid-solid natural circulation was set up to research the flow and distribution of solid particles and pressure drop of liquid-solid two-phase flow in a heating pipe bundle.
建立了气-液-固冷模多管自然循环流化床蒸发器,利用CCD图像采集和处理系统,研究了固体颗粒的种类、含率和通气量等操作参数对于固体颗粒的流化和运动形态、分布以及加热管束中液-固两相流压降的影响。
4) gas-liquid-solid
气液固
1.
Experimental study on particle distributor in gas-liquid-solid circulating fluidized bed;
气液固循环流化床颗粒分布板实验研究
2.
In this paper, three different distributors that are used to distribute solid particles have been designed in gas-liquid-solid circulating fluidized bed heat exchanger, in order to enhance heat transfer, prevent and remove foulings.
为使气液固循环流化床换热器更好地强化传热和防、除垢,本文设计了三种不同型式的固体颗粒分布板。
3.
An experimental apparatus of the gas-liquid-solid exterior circulating fluidized bed heat exchanger, which made use of uneven-pores distributor as the three-phase distribution device, was established.
在气液固外循环流化床换热器的下管箱安装了不同型式的三相分布板,考察了分布板开孔率、安装高度,操作参数等对全床压降的影响。
6) gaseous [ liquid, solid ] phase
气[液、固]相
补充资料：气液转换器
将气压信号转换为液压信号的一种转换器。常用于将气动调节仪表或气动手动操作器的输出信号转换为液压信号，驱动液动执行机构动作。液动执行器具有功率大、机械刚性好、动态响应快等特点，因此在精密控制系统、重型机床、汽车、船舶和航空中都有广泛的应用。而气动仪表对各种环境有很强的适应性，而且容易维护、维修、系统投资费用低，因此在上述应用方面常常采用气动仪表与液动执行器相结合的自动控制系统，这时就要采用气液转换器。常用的气液转换器是与液压执行机构制成一体的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条