1) residual compressive strength
残余抗压强度
1.
Experimental investigation on the effects of moisture content and fiber on both explosive spalling and residual compressive strength of high performance concrete(HPC) after exposure to high temperatures was presented.
研究了含湿量和纤维对高性能混凝土高温爆裂及高温后残余抗压强度的影响。
2.
This paper presented the performance of shrinkage compensating concrete exposed to high temperatures, concluding residual compressive strength and Cl--penetrability performance.
本论文研究了补偿收缩混凝土高温性能特征,包括残余抗压强度和氯离子渗透性能。
2) residual compressive strength
抗压残余强度
1.
Test of concrete under high temperature and the study of residual compressive strength after high temperature;
混凝土高温试验及高温后抗压残余强度研究
3) residual shear strength
残余抗剪强度
1.
In designing and calculating,several measures such as using the indexes of residual shear strength of sliding-belt soil and double-parameter method etc are ta.
为提高计算结果的可靠度 ,采用了滑带土的残余抗剪强度指标和双参数法等手段。
2.
relation between normal stress and peak shear strength, relation between normal stress and residual shear strength, and relation between normal stress and frictional shear strength), the shear deformation properties of two kinds of cement concretes, the characteristics and description of shear faces.
介绍了丹江口大坝后期加高现场原位抗剪试验研究成果，内容包括：法向应力与峰值抗剪强度的关系；法向应力与残余抗剪强度的关系；法向应力与摩擦抗剪强度的关系；两种水泥混凝土剪切变形特性；剪切面特征及描述。
4) residual flexural strength
残余抗折强度
1.
Through contrasting and analyzing the test phenomenon as well as the data at elevated-temperatures and after elevated-temperatures,the residual flexural strength of recycled concrete was studied,meanwhile,the varying characteristics and the relationships between the residual flexural strength of recycled concrete and exposed temperatures were analyzed.
通过对高温中和高温后试验现象与数据的对比,研究了高温后再生混凝土的残余抗折强度,分析了高温后再生混凝土的残余抗折强度与经历温度之间的相互关系与变化特点,同时与已有高温后再生混凝土的残余抗压强度进行了对比分析。
5) residual strength
抗剪强度残余强度
6) remaining pressure
残余压强
1.
Taking the air-jet vacuum pump as the research object and utilizing the software of FLUENT to simulate the flow field of air-jet vacuum, in a certain operating condition, the influences of five structure parameters on the remaining pressure in air-jet vacuum pump are obtained.
以空气射流真空器为研究对象,采用FLUENT软件对其内部流场进行数值模拟,得出在一定的工况下,空气射流真空器5个结构参数对其残余压强的影响情况。
2.
In a certain operating condition,the influences of the structure parameters ratio of areas,angle of mixing section,distance between nozzle exit and inlet of throat section,length of throat section,and angle of(diffuser) section on the remaining pressure in air-jet vacuum pump are analyzed.
分析了一定工况下,面积比、吸入段锥角、喉嘴距、喉管长度和扩散段锥角对空气射流真空器残余压强的影响,得到较优的结构参数,为空气射流真空器的设计和研究提供一定的理论支持。
补充资料：岩石残余强度
岩石残余强度
residual strength of rock
yonshr eanyu qangdIJ岩石残余强度(residual strength of:oek) 指岩石试件在单轴或三轴抗压、抗剪试验中发生宏观破坏后的最小抵抗应力。是岩石物理力学性质之一。图1中口，为在刚性试验机上作抗压试验获得的岩石残余强度，在普通材料试验机上作抗压试验，作不出峰值后区应力一应变曲线，不能获得残余强度。图2中rr为剪切试验中测得的残余强度，亦即岩石发生剪切破坏后剪切面上的摩擦应力。 以盛 只} 侧}/、 尚1/、 a卜一声一一_一一_一___‘_ O正应变舀 图l单轴或三轴压缩试验 、! 二创{l\ 世匕~一 O剪应变占 图2剪切试验 (潘长良)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条