1) styrene-acrylate emulsion
苯丙乳液
1.
Surface modification and characterization of nanometer TiO_2 for nanometer styrene-acrylate emulsion polymerization;
用于合成纳米苯丙乳液的纳米TiO_2表面改性及表征(英文)
2.
Study on synthesis of core-shell type of styrene-acrylate emulsion with silicon;
核/壳型含硅苯丙乳液的合成与研究
3.
Research on Synthesis and Properties of Styrene-acrylate Emulsion in Textile;
纺织用苯丙乳液的合成及性能研究
2) styrene-acrylic emulsion
苯丙乳液
1.
Influence of functional monomer on styrene-acrylic emulsion performance;
功能单体对苯丙乳液性能的影响
2.
Study of styrene-acrylic emulsion modified by double-bond tetra-coordinated silicon;
含四配位硅的烯类单体改性苯丙乳液的研究
3) styrene/acrylic emulsion
苯丙乳液
1.
Vinyltrimethoxysilane was used in polymerization of styrene/acrylic emulsion,the property of emulsion was measured.
用乙烯基三甲氧基硅烷与苯乙烯、丙烯酸酯共聚合成苯丙乳液,对乳液性能进行了检测,并用傅里叶红外光谱对乳液化学结构进行了表征,证明乙烯基三甲氧基硅烷参与了共聚物的合成。
2.
By means of orthogonal testing and overall merit assessment,the influence of polymerization process of the multiple styrene/acrylic emulsion system,monomers for copoly meri.
以苯乙烯和丙烯酸丁酯作为主要单体,甲基丙烯酸及甲基丙烯酸甲酯作为必要成分,采用过硫酸盐作引发剂,在乳化剂作用下进行聚合制得苯丙乳液。
3.
Styrene(ST) as hard monomer, butyl acrylate(BA) as soft monomer, A and B as functional monomers, styrene/acrylic emulsion was synthesized by semicontinuous emulsion polymerization.
以苯乙烯为硬单体,丙烯酸丁酯为软单体,单体A和单体B为功能性单体,采用半连续乳液聚合法合成苯丙乳液,对乳液合成条件进行了研究,对乳液和浸渍后汽车工业滤纸性能进行了检测、分析。
4) styrene-acrylate latex
苯丙乳液
1.
Study on preparation of styrene-acrylate latex with core-shell structure used in ultra-low VOC building internal wall coating;
超低VOC内墙涂料用核壳结构苯丙乳液的制备研究
2.
Preparation of styrene-acrylate latex for paper-plastic laminating
纸塑复合用苯丙乳液的研制
3.
Styrene-acrylate latex was synthesized by styrene, acrylate and small amount of acrylic acid.
苯丙乳液是由苯乙烯、丙烯酸酯类和少量丙烯酸共聚的乳液,此乳液被广泛地用于涂料行业。
5) styrene acrylic emulsion
苯丙乳液
1.
Effect of new type emulsifiers on properties of styrene acrylic emulsion
新型乳化剂对苯丙乳液性能的影响
2.
The result expatiated that styrene acrylic emulsion which was made from styrene, butyl acrylate and acrylic acid had the bettr chemical stability.
介绍了以苯乙烯、丙烯酸丁酯和丙烯酸为反应单体,过硫酸铵为引发剂苯丙乳液的合成工艺。
6) styrene-acrylic latex
苯丙乳液
1.
People pay attention to styrene-acrylic latex day by day because of its excellent chemical and physical properties.
苯丙乳液因其良好的物理化学性能,日益受到人们的青睐。
补充资料：苯丙乳液
苯丙乳液是由苯乙烯和丙烯酸酯单体经乳液共聚而得。乳白色液体，带蓝光。固体含量40～45％，粘度80～1500mPa·s，单体残留量0.5%，PH值8～9。苯丙乳液附着力好，胶膜透明，耐水、耐油、耐热、耐老化性能良好。
苯丙乳液用作纸品胶粘剂，也可与淀粉、聚乙烯醇、羧甲基纤维素钠等胶粘剂配合使用。贮存于5～30 ℃的库房内，贮存期1年。
苯丙乳液用作纸品胶粘剂，也可与淀粉、聚乙烯醇、羧甲基纤维素钠等胶粘剂配合使用。贮存于5～30 ℃的库房内，贮存期1年。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条