1) Phenolic epoxy resin
酚醛环氧树脂
1.
Preparation of water-borne phenolic epoxy resin latex;
水性酚醛环氧树脂乳液的制备
2.
Preparation of phenolic epoxy resin high-temperature resistance adhesives modified with silicone;
有机硅改性酚醛环氧树脂耐高温胶粘剂的研制
3.
In this essay,the chain transfer agent RAFT made in our laboratory has a reaction with phenolic epoxy resin.
本文采用本实验室制备的一种RAFT链转移剂,先与酚醛环氧树脂进行加成反应,然后通过控制丙烯酸的量再对加成后树脂进行改性,制备出了水溶性酚醛树脂;采用FTIR、GPC、DSC等测试手段对树脂的结构进行了表征,并对其性能进行了研究。
2) Novolac Epoxy Resin
酚醛环氧树脂
1.
Allyl group was grafted into novolac epoxy resin,in order to take on photosensitivity.
通过在酚醛环氧树脂中引入烯丙基,以实现树脂的感光性,考察了四种催化剂和其不同用量及两种阻聚剂对反应的影响,利用配比不同的丙烯酸和酚醛环氧树脂合成出的感光预聚物,研究了其对感光组合物性能的影响。
2.
Two kinds of cyanate - epoxy resin blends, bisphenol A dicyanate - bisphenol A diglycidyl ether epoxy resin blends and bisphenol A dicyanate - novolac epoxy resin blends were prepared via melt blending process.
通过熔融共混制备了双酚A二氰酸酯/双酚A二缩水甘油醚环氧树脂、双酚A二氰酸酯/酚醛环氧树脂两种共混物。
3.
By mixing epoxy resin E-51 and novolac epoxy resin F-51 with weight ratio 1:1 the mix resin was compounded.
环氧树脂E-51和酚醛环氧树脂F-51以质量比1:1配制成混合树脂,以占环氧树脂15%的CTBN为增韧改性剂,制成预聚物,再与改性芳香胺固化剂、邻甲酚缩水甘油醚、耐高温填料等配合,配制成HT-737耐高温胶粘剂,满足了某军用飞机天线中聚苯硫醚与镀银黄铜板的粘接密封。
4) epoxy phenolic resin
酚醛环氧树脂
1.
Synthesis and characterization of quaternary ammonium salt groups epoxy phenolic resin;
酚醛环氧树脂季铵盐的合成及表征
2.
Water soluble, photocrosslinkable prepolymer were synthesized from epoxy phenolic resin(epoxy novolak resin) via ring opening reaction with acrylic acid, followed by ring opening reaction with aqueous solution of triethylamine hydrochloride.
HCl与酚醛环氧树脂进行开环反应 ,合成了一种新型的水溶性感光高分子。
3.
This thesis deals with the ringopening reactions of epoxy phenolic resin with triethylamine hydrochloride(TAC) in order to prepare a waterdevelopable polymer.
用三乙胺盐酸盐与酚醛环氧树脂开环反应合成了一种水溶性聚合物,研究了相转移催化剂、反应时间、反应温度、开环顺序等条件对反应程度的影响。
5) epoxy-phenolic resin
酚醛环氧树脂
1.
A special waterborne photosensitive epoxy-phenolic resin was synthesized by modification of F-44 epoxyphenolic resin with acrylic acid and succinic anhydride.
用丙烯酸和琥珀酸酐对F-44酚醛环氧树脂进行改性,合成了一种水性光敏酚醛环氧树脂。
2.
A water soluble photosensitive epoxy-phenolic resin was synthesized by modifying acrylic F-44 epoxy-phenolic resin with succinic anhydride.
用琥珀酸酐对丙烯酸改性的F-44酚醛环氧树脂作进一步的改性,合成了一种具有光敏性的水性酚醛环氧树脂,研究了催化剂种类、反应温度及反应时间对琥珀酸酐转化率的影响,并考察了原料配比对改性树脂水溶性、力学性能和耐腐蚀性能的影响。
6) novolac resin
酚醛环氧树脂
1.
Effects of novolac resin(NR)and micro-capsulated red phosphorus(MRP)on inflaming retarding property of high impact polystyrene(HIPS)were investigated by means of cone calorimeter,limiting oxygen index(LOI)and UL94 vertical combustion test.
采用锥形量热仪、极限氧指数(LO I)和UL94垂直燃烧测试方法研究了微胶囊红磷(MRP)和酚醛环氧树脂(NR)对高抗冲聚苯乙烯(H IPS)阻燃性能的影响。
2.
The cone calorimeter was used to study the effect of triphenyl phosphate(TPP) and novolac resin(NR) on flame-retardant properties of HIPS in the paper.
采用锥形量热仪对酚醛环氧树脂(NR)和磷酸三苯酯(TPP)对高抗冲聚苯乙烯(HIPS)阻燃性能的影响进行研究。
补充资料：酚醛环氧树脂
分子式：
CAS号：
性质：是由苯酚或邻甲酚与甲醛反应制得的酚醛树脂，再与环氧氯丙烷反应而成的一类树脂。其特点是每分子的环氧官能度都大于2，可使涂料的交联密度大，耐热性和耐化学品性高于双酚A型环氧树脂，但漆膜较脆，附着力稍低，一般需较高的固化温度，故常与双酚A环氧树脂合用，或用双酚A环氧树脂作底漆，用酚醛环氧树脂作中涂层及面漆。
CAS号：
性质：是由苯酚或邻甲酚与甲醛反应制得的酚醛树脂，再与环氧氯丙烷反应而成的一类树脂。其特点是每分子的环氧官能度都大于2，可使涂料的交联密度大，耐热性和耐化学品性高于双酚A型环氧树脂，但漆膜较脆，附着力稍低，一般需较高的固化温度，故常与双酚A环氧树脂合用，或用双酚A环氧树脂作底漆，用酚醛环氧树脂作中涂层及面漆。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条