1) shear
[英][ʃɪə(r)] [美][ʃɪr]
剪切
1.
Dissipative Particle Dynamics Study on Morphology Changes of Cyclic Diblock Copolymer Microphase Under Shear;
剪切场作用下环形二嵌段共聚物微相形态变化的耗散粒子动力学研究
2.
Improvement of the performance of size film by high speed shear homogenization;
高速剪切均质改善浆膜性能
3.
The Development of High-speed Shearing Equipment for Bar Based on Virtual Prototype;
基于虚拟样机技术的高速棒料剪切机开发研究
2) shearing
[英]['ʃiəriŋ] [美]['ʃɪrɪŋ]
剪切
1.
Bending and Shearing Failure Process of Moso bamboo-Chinese Fir Laminated Composites;
毛竹/杉木层积复合材弯曲与剪切破坏的微观形变过程
2.
Cross linking of HPAM/Cr~(3+) microgel system under shearing state;
HPAM/Cr~(3+)微凝胶体系在剪切状态下的交联
3.
Features of fractured surface and microstructure ofplastic shearing zone of red copper bar under axial load;
紫铜棒材轴向加压精密塑性剪切变形区的金相组织和断面特征
3) cutting
[英]['kʌtɪŋ] [美]['kʌtɪŋ]
剪切
1.
Computer aided cutting optimization of anchor chain bar steel production;
锚链钢棒材生产的计算机辅助剪切优化
2.
Qualitative problems during plate - cutting with tilted shearing machine and solving methods;
中板斜刃剪剪切质量问题及解决办法
3.
The Design and Research of Windbreak and Sand Fixation StrawCheckerboard Barriers Paving Robot s Cutting Setup;
草方格铺设机器人剪切机构的设计研究
4) cut
[英][kʌt] [美][kʌt]
剪切
1.
Aimed at the question of double-ruler optimized cutting in the bar p roduct line,advanced two optimizing control method and compared with them simply .
针对棒材生产线倍尺优化剪切问题提出了两种思想的优化控制方法,并简要给出了对这两个方案的比较。
2.
After presenting the necessary and pressure of WISCO to develop the st eel cut & delivery system, the author gives the aim, principles, ways, condition dema nds, general development steps and general location visualization of this progra m.
本文在阐明武钢发展钢材剪切配送必要性和紧迫性的基础上 ,提出了武钢发展钢材剪切配送的目标、原则、方式、条件要求、总体步骤和选址布局的总体设
3.
The whole process of abstraction, purification and cutting of 300-500bp of the normal wild paddy DNA is discussed in this paper.
本文对普通野生稻OryzarufipogonDNA的提取、纯化到最后将DNA剪切成 30 0— 5 0 0bp的整个过程进行了阐述 。
5) clipping
[英]['klɪpɪŋ] [美]['klɪpɪŋ]
剪切
1.
Clipping of Complex Grid Contour;
复杂矩形网等值线图的剪切
2.
The excrement of sheep and cattle shapes like a ball which demands the rotor of the mixer to have the clipping function Thus, the QH-5 clippin.
目前国内外生产混合机都不适用于牲畜排泄物的混合,因为牲畜粪便中纤维物较多,牛羊等粪便为团状,在混合中要求混合机的转子具有较强的剪切能力。
3.
Design and Research on WQH-4 Horizontal Clipping and Mixing Machine;
为了将牧畜粪便与添加剂进行充分混合搅拌,要求混合机具有较强的剪切能力。
6) shear
[英][ʃɪə(r)] [美][ʃɪr]
剪,切
补充资料：剪切
使物体发生畸变的作用，是剪应力和剪应变的简称。产生均匀变形的剪切作用有两种：纯剪切和简单剪切。平面纯剪切和简单剪切如图1、图2所示。纯剪切变形的主应变方向不随变形的递进而转动，所以又称非旋转变形或共轴变形，但两条主应变线的长度却分别持续伸长或持续缩短。纯剪切变形过程中，除主应变线以外的所有方向线的方向和长度都随变形的递进作有规律的变化。拉伸与压缩作用产生纯剪切变形。简单剪切变形的两个主应变线的方向和长度随变形的递进而改变，所以又称旋转变形或非共轴变形。简单剪切过程中除了平行剪切面方向线的方向和长度不随变形的递进而改变以外，其他所有方向线的方向和长度都随变形的递进而改变。简单剪切变形由一系列平行的滑动层受剪切滑动而形成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条