1) tin bronze
锡青铜
1.
Centrifugal Casting Technology for HighQuality Tin Bronze Sleeve;
离心铸造优质锡青铜套筒工艺
2.
Evaluation of uncertainty in the determination of Sn in tin bronze by photoelectric direct reading spectrometry
光电直读光谱分析法测定锡青铜中锡不确定度的评定
3.
The effects of Zn, Sn on properties and microstructure of vacuum casting tin bronze were studied.
用相同质量的锌代替部分锡,研究了Zn、Sn对真空铸造锡青铜合金性能和组织结构的影响。
2) tin-bronze
锡青铜
1.
Small Caliber Tin-bronze Ring in Centrifugal Casting
离心铸造锡青铜小口径涨圈
2.
The experimental investigation of the diffusion bonding of titanium alloy(Ti-6Al-4V) to tin-bronze(ZQSn10-10) was carried out.
对钛合金Ti-6A l-4V与锡青铜ZQSn10-10异种金属扩散连接进行了试验研究。
3.
The experimental investigation of the diffusion bonding of titanium alloy(Ti-6Al-4V) to Tin-bronze (ZQSn10-10) in vacuum was carried out by using pure copper as the transition metal.
采用纯铜(Cu)箔作中间过渡层在真空下对钛合金Ti-6Al-4V与锡青铜ZQSn10-10异种材料进行扩散连接。
3) Bronze
[英][brɔnz] [美][brɑnz]
锡青铜
1.
Analysis of Defects and Prevention Measures of Bronze Impeller;
锡青铜叶轮的铸造缺陷分析和改进措施
2.
To catch up with the production technology of tempered bead wire with chemical plating bronze,the internal advanced line for the product is introduced.
跟踪化镀锡青铜回火胎圈钢丝生产技术 ,介绍具有国内先进生产技术水平的化镀锡青铜胎圈钢丝生产线 ,该生产线DV值为 10 0 ,可生产 0 。
3.
Plating bronze by chemical displacement on bead wire has been placed in “The Tenth Five Years Plan”about steel wire products science and technology development.
胎圈钢丝的化学置换镀锡青铜已列入“十五”金属制品科技发展建议。
4) Sn-P bronze
锡磷青铜
1.
An analysis of the "blue zone" or "blue spot" on Sn-P bronze strip surface;
锡磷青铜锭坯表面“蓝带”、“蓝斑”形成原因探讨
2.
Sn-P bronze is an elastic copper-based alloy with the requirements of high accurate of dimension,good surface quality,excellent shape of strip and properties for production.
锡磷青铜作为广泛应用的弹性合金材料,生产上要求其尺寸精度高、表面质量好、板形和性能优良。
3.
By using plasma arc method an Sn-P bronze hardfacing formed on steel 25,which contains more strengthening phases.
25钢基体锡磷青铜合金粉末等离子孤喷焊层,含有较多的强化相,与镀铬轮组成摩擦副,耐磨损性能明显优于由QA19-4青铜和镀铬轮组成的摩擦副。
5) phosphor bronze
锡磷青铜
1.
The cause for the fracture of phosphor bronze strip during rapid cooling for removing the scales on its surface is studied.
阐述了在实际生产过程中,因大量使用镀白旧料生产锡磷青铜带材,在急冷破鳞时易出现开裂现象及其产生的原因。
2.
The appearance of bluish streaks and spots on the surface of horizontally cast slab of phosphor bronze is described and the cause of the phenomenon is explored.
阐述了生产过程中锡磷青铜带材易出现的“蓝带”、“蓝斑”现象以及其产生的原因。
3.
The phenomenon of the bluish spots formed during production on the surface of phosphor bronze strip is described and the influence of the formation of inverse segregation and the crystallizer discussed.
论述了锡磷青铜板带材生产过程中出现的蓝斑现象,探讨了形成反偏析的机理及结晶器表面状况对蓝斑现象的影响。
6) tin-bronze rod
锡青铜棒
补充资料:锡青铜
分子式:
CAS号:
性质:含有3%~14%锡的青铜,此外还常常加入磷、锌、铅等元素。是人类应用最早的合金,至今已有约4000年的使用历史。它耐蚀、耐磨,有较好的力学性能和工艺性能,并能很好地焊接和钎焊,冲击时不产生火花。分为加工锡青铜和铸造锡青铜。用于压力加工的锡青铜含锡量低于6%~7%,铸造锡青铜的含锡量为10%~14%。常用牌号有QSn4-3,QSn4.4-2.5,QSn7-O.2,ZQSn10,ZQSn5-2-5,ZQSN6-6-3等。锡青铜是铸造收缩率最小的有色金属合金,可用来生产形状复杂、轮廓清晰、气密性要求不高的铸件。锡青铜在大气、海水、淡水和蒸汽中十分耐蚀,广泛用于蒸汽锅炉和海船零件。含磷锡青铜具有良好的力学性能,可用作高精密工作母机的耐磨零件和弹性零件。含铅锡青铜常用作耐磨零件和滑动轴承。含锌锡青铜可作高气密性铸件。
CAS号:
性质:含有3%~14%锡的青铜,此外还常常加入磷、锌、铅等元素。是人类应用最早的合金,至今已有约4000年的使用历史。它耐蚀、耐磨,有较好的力学性能和工艺性能,并能很好地焊接和钎焊,冲击时不产生火花。分为加工锡青铜和铸造锡青铜。用于压力加工的锡青铜含锡量低于6%~7%,铸造锡青铜的含锡量为10%~14%。常用牌号有QSn4-3,QSn4.4-2.5,QSn7-O.2,ZQSn10,ZQSn5-2-5,ZQSN6-6-3等。锡青铜是铸造收缩率最小的有色金属合金,可用来生产形状复杂、轮廓清晰、气密性要求不高的铸件。锡青铜在大气、海水、淡水和蒸汽中十分耐蚀,广泛用于蒸汽锅炉和海船零件。含磷锡青铜具有良好的力学性能,可用作高精密工作母机的耐磨零件和弹性零件。含铅锡青铜常用作耐磨零件和滑动轴承。含锌锡青铜可作高气密性铸件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条