说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 截面形状
1)  cross section shape
截面形状
1.
Effect of cross section shape of interlacer yarn duct on quality of interlaced yarn
网络器丝道截面形状对网络丝质量的影响
2.
The influential factors on cross section shape of PAN fiber were studied during dry-jet-wet spinning.
对干湿法纺丝中PAN纤维的截面形状影响因素进行了研究。
3.
Thus,it is necessary to study the relationship between the welding parameters and weld cross section shape.
通过改变聚焦电流、其余参数不变,能够得到聚焦电流与焊缝截面形状、焊缝横截面面积、熔深、表面熔宽、半熔深处熔宽、余高等焊缝截面几何参量之间的关系,对优化电子束填丝焊接工艺参数具有积极参考意义。
2)  cross-section shape
截面形状
1.
Experimential expressions for design of beam cross-section material and cross-section shape;
抗弯梁材料及截面形状设计的经验公式
2.
Influence of cross-section shape of tunnel on in-tunnel air blast wave propagation
坑道截面形状对化爆冲击波传播规律的影响程度分析
3.
The suppositions of the cross-section shape of yarns,especially weft yarns,in composite materials are different when predicting mechanical properties of three dimensional woven reinforced composite materials.
本文中假设纬纱截面形状分别为圆形、跑道形、凸透镜形、矩形,经纱横截面形状为矩形,采用刚度平均法和等应变力学模型计算了4种角联锁结构复合材料的弹性模量,经与复合材料的数字图像对比分析和实验验证表明,圆形纬纱截面形状假设与数字图像相差较大,与其它截面形状假设的弹性模量预测结果相差也较大,跑道形、凸透镜形、矩形等纬纱截面形状假设彼此间弹性模量预测结果的差异很小,与实验数据也具有较好的一致性。
3)  section shape
截面形状
1.
Influence of windowpane airproof bar section shape on locomotive airproof performance;
窗玻璃密封条截面形状对机车密封性能影响的探讨
2.
Numerical simulation of the effect of channel section shape on the inner flowing of vortex pump;
流道截面形状对旋涡泵内部流动影响的数值模拟
4)  cross section
截面形状
1.
Study on the forming condition of cross section of polyacrylonitnle(PAN) fiber during DMSO wet spinning;
DMSO湿法PAN纤维截面形状形成条件的研究
2.
With nickel base single crystal alloy, the relationship of open slip operating system and crystallographic necking cross section and lattice rotation is studied.
以镍基单晶合金为对象 ,通过有限元分析 ,研究了开动滑移系类型与单晶体颈缩截面形状及晶格转动的关系 ,建立了单向拉伸光滑试样颈缩截面形状、晶格转动与开动滑移系、试样轴晶体取向的关系。
3.
The effect of coagulation bath conditions,including bath concentration,bath temperature,jet stretch radio on the cross section and skin-core structure of PAN nascent fibers during wet-spinning is discussed using the optical microscope with image processing software.
借助光学显微镜及图像处理软件研究了凝固浴质量分数、温度、喷丝头牵伸倍率对湿纺PAN初生纤维截面形状和皮芯结构的影响。
5)  axial section shape
轴截面形状
6)  cross-sectional shape
横截面形状
补充资料:裂变截面
分子式:
CAS号:

性质:一个入射粒子使单位面积上一个靶核发生裂变反应的概率。用σf表示,σf=If/IaNs,其中Ia是单位时间内入射粒子的数目,If是单位时间内发生的裂变数,Ns是单位面积上的靶核数。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条