说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 调节阀
1)  control valve
调节阀
1.
Numerical simulation and experimental analysis of interior flow field in control valves;
调节阀内部流场的数值模拟与试验分析
2.
The calculation of characteristics curve and differential pressure under each opening on boiler feed water control valve;
锅炉给水调节阀型线和各开度下压差的计算
3.
Design of air supply control valve and monitor system for the power plant boilers;
热电锅炉配风调节阀设计及控制系统研究
2)  regulating valve
调节阀
1.
Improvement of steam regulating valve and experimental research;
蒸汽调节阀改进设计及试验研究
2.
CFD simulation of the diaphragm load regulating valve for marine fresh water generator;
船用海水淡化装置膜片式负荷调节阀特性CFD数值模拟
3.
Analysis of core vibration of regulating valve in regulation process;
调节阀阀芯变开度振动分析
3)  adjusting valve
调节阀
1.
The discussion about adjusting valve design and selection in alumina evaporation process;
氧化铝蒸发工序调节阀设计选型问题探讨
2.
Operation analysis and investigation show that it is caused by the inappropriate design of hot vapor bypass control system, so the revamping has been carried out as follows: The diameter of hot vapor bypass pipeline has been enlarged from DN 40 mm to 80 mm, and the pressure difference of hot vapor bypass adjusting valve decreased from 50 kPa to 35 kPa; A vent pipeline for non-condensable gas fro.
改造的措施主要有:增大了热旁路管道的直径(由DN40mm增大到DN80mm),并降低了热旁路调节阀的压差取值(由50kPa降低到35kPa);增设一条自冷凝器壳程出口至回流罐的不凝气放空管道;对脱丁烷塔分程控制系统进行了改造,即将调节器输出信号的0-45%,55%%-100%分别用于控制热旁路调节阀和放空阀。
4)  governing valve
调节阀
1.
The steam turbine governing valves usually have a nonlinear position-flow characteristic.
调节阀的升程流量特性基本上是非线性的,为了实现机组静态特性的线性化,必须对阀门的非线性特性进行补偿。
2.
The stability of steam turbine control system could be effected by the governing valve nonlinear position-flow characteristic.
调节阀特性非线性将影响机组的稳定运行,必须通过非线性补偿,使机组的静态特性线性化。
5)  regulator [英]['reɡjuleɪtə(r)]  [美]['rɛgjə'letɚ]
调节阀
1.
Different configurations of valve clack affecting the local flowing resistances in the regulator of ZVF;
ZVF型调节阀中不同阀瓣型线对局部流阻的影响
2.
In term of the regulator structure features, the openings of regulator can be classified into effective movement region, inefficient movement region, and strong adjusting region.
调节阀固有阻力特性进行了分析 ,推导出调节阀固有阻力关系式 ,提出了衡量调节阀阻力的特征阻力概念。
6)  regulation valve
调节阀
1.
The breakdown of conbustion system is introduced when the varioty of fuel oil is changed,according to calculation,the suitable regulation valve is defined,this moving effect is good.
介绍了因燃油品种变化而引起燃烧系统故障的情况 ,通过计算 ,确定了合适的调节阀 ,运行效果良
补充资料:调节阀
      用以控制流体的执行元件。它是一种可调试的机械节流装置,又称调节机构。调节阀一般安装在管道上,改变它的阻力系数,就可改变流过管道的介质(如气体、液体或粉料等)流量。从流体力学的观点看,调节阀是一种局部阻力可以变化的节流元件。对于不可压缩流体,流量仅随阻力系数变化。调节阀的阻力系数的变化是通过阀芯行程的改变实现的。一般调节阀与执行机构结合在一起工作。例如调节阀与气动执行机构结合成一个整体,即构成气动执行器,是现代工业控制系统中应用最广的一种执行器。调节阀与电动执行机构相配合,可用作各种控制系统中的执行器(见气动执行元件,电动执行元件)。
  
  调节阀依用途不同有许多种结构型式。常用的是直通双座阀结构。阀芯上下移动便能改变与阀座的相对位置,阻力系数也随之变化。流体通过阀门的相对流量与阀门相对开度之间的关系,称
  
  
  
   
  为调节阀的流量特性,即式中Q/Qmax为相对流量,即调节阀某一开度下的流量与全开时流量之比;l/L为相对开度,即调节阀某一开度下的行程与全开时行程之比。调节阀的流量特性主要决定于阀芯形状。常用的理想流量特性曲线有直线、等百分比(又称对数)、快开和抛物线几种(见图),它们是在调节阀前后压差恒定的情况下得到的。
  
  调节阀直接与工作介质相接触,工作条件和环境差异很大,为了适应各种不同的需要,调节阀有多种型式。除直通双座阀外,常用的还有直通单座调节阀、三通调节阀、角型调节阀、蝶阀、偏心旋转调节阀等。有些调节阀还要按特殊要求进行设计,如用于食品工业的食品卫生调节阀。
  
  选用调节阀时除了根据自动控制系统的要求,确定流量特性的型式和阀门的种类外,还需要根据阀门的流通能力C值来确定阀门结构型式和尺寸。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条