说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 后刀面磨损机理
1)  Flank wear mechanism
后刀面磨损机理
2)  flank wear
后刀面磨损
1.
The machining error caused by the flank wear of cutting tool in milling processes is analyzed,and a mathematic model about machining errors was proposed based on the flank wear of cutting tool.
对铣削加工过程中后刀面磨损对加工精度的影响进行了分析和研究,建立了基于刀具后刀面磨损的铣削加工误差的数学模型。
2.
Experiments are performed on the relationship between tool flank wear and cutting force, and that between flank wear and the surface residual stress of workpiece.
实施了刀具的后刀面磨损与切削力、刀具的后刀面磨损与工件表面残余应力的试验;分析了刀具切削力、刀具状态和工件表面残余应力的相互关系;提出了刀具状态在线监控的必要性。
3.
An orthogonal cutting force model with tool flank wear has been analyzed based on cutting test investigation.
在试验研究基础上进行了有后刀面磨损的正交切削模型分析。
3)  tool flank wear
后刀面磨损量
1.
The effect of the tool flank wear (VB)on the cutting force and the surface roughness is studied, basing on the experiments with the same workpiece materials, same tool materials,same cutting parameters (depth of cut, feed rate) and different tool conditions(focusing on different tool flank wears).
通过切削试验探索了在相同的工件材料、刀具材料、切削参数(切削深度、进给量)和不同的刀具磨损状态(后刀面磨损量)下,刀具后刀面磨损量(VB)对切削过程中的切削力及工件表面粗糙度的影响,并对这些影响的产生机理进行了讨论。
4)  major flank wear land
后刀面磨损带
1.
The area of the major flank wear land ( A B ) is presented as an index estimating milling cutter wear out.
鉴于后刀面磨损带面积 (AB)可以作为衡量刀具磨损程度的一个指标 ,以此为据建立了作用在小直径螺旋立铣刀后刀面瞬时切削力和平均切削力与AB 间的数学模型 。
5)  tool wear length
后刀面磨损长度
6)  Tool wear in flank
后刀面磨损值
补充资料:刀鱼面

【材料】刀鱼、鸡肉各500克,精白面条600克,猪骨(猪肉也可)500克,鲜汤1500克,精盐20克,绍酒10克,干淀粉10克,熟猪油50克,胡椒粉等味料适量。

【制作www.vipchat.cn】把刀鱼去鳞、腮,掏出肠洗净沥干后切成块,烧热锅放熟猪油随后把刀鱼入锅炒干成鱼松状时取出,装入布袋扎紧口仍投入锅中,加鸡肉、猪骨、淋入绍酒,加冷鲜汤,用旺火烧开后改小火煮烂。待鱼肉全部溶化,汤稠浓呈白色时滤去骨刺,剩下1000克左右汤,最后把剩下的鲜汤回锅加精盐20克,绍酒10克,各味料适量,烧开后用湿淀粉勾芡即成刀鱼汁盛起。用这种汁适量下面条即成可口的刀鱼面。

【特点】味道鲜美,和中开胃,对润泽皮肤有好处。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条