说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 丁腈改性酚醛树脂
1)  NBR modified phenolic resins
丁腈改性酚醛树脂
1.
The tribological properties of NBR modified phenolic resins with nano-Al2O3 and coupling agents were studied by the contrast experiment.
通过对比试验,研究偶联剂改性纳米Al2O3粒子对丁腈改性酚醛树脂摩擦磨损性能的影响。
2.
B 4C was added into the NBR modified phenolic resins which was further used to prepare frictional materials.
研究了在丁腈改性酚醛树脂中掺杂B4C制备的摩阻材料的性能。
2)  modified phenol-formaldehyde resin
改性酚醛树脂
1.
An anionic phenol-formaldehyde resin which synthesized by phenol, formaldehyde and diethylene triamine was studied in this paper, and this modified phenol-formaldehyde resin was used in papermaking as an intensifier.
结果表明,单独使用改性酚醛树脂时增强效果不显著;改性酚醛树脂和阳离子淀粉共同使用能有效提高纸张的抗张指数和环压指数。
2.
A new type of brake pad using hybrid fibers reinforced modified phenol-formaldehyde resin matrix was produced.
采用混杂纤维作增强材料并以改性酚醛树脂为基体制成提速列车用的制动闸片。
3)  boron modified phenolic resin
硼改性酚醛树脂
1.
The relationship between glass fiber(GF) content and thermal properties and mechanical properties of glass fiber reinforced boron modified phenolic resin(GF/BPR) composites were studied.
研究了玻璃纤维(GF)含量对玻璃纤维增强硼改性酚醛树脂(GF/BPR)复合材料力学性能、耐热性能的影响。
4)  modified phenol resin
改性酚醛树脂
1.
This paper discussed some technical problems affected the quality of product,such as modifier proportioning in producing of cashew shell oil and melamine modified phenol resin,estimating of reaction terminal point and rinsing of reaction product.
探讨腰果壳油和三聚氰胺改性酚醛树脂生产中改性剂配比、反应终点判断和反应产物水洗等影响产品质量的技术问题,提出了解决问题的有效措施。
2.
The moulding compound was made from a modified phenol resin by means of extrusion method.
以改性酚醛树脂为基材,无机纤维为增强材料,配合适当的固化剂和无机填料,采用挤出法制造出一种用于电机换向器的耐高温酚醛塑料。
5)  amine-modified phenol-formaldehyde resin
胺改性酚醛树脂
1.
The obtained amine-modified phenol-formaldehyde resins comprise novel retention systems with polyethylene oxide, which can be used to improve TMP pulp retentions.
利用二甲胺和异丙胺在适宜的条件下对酚醛树脂进行改性,得到了胺改性酚醛树脂。
6)  fire-resistant resin
B改性酚醛树脂
补充资料:酚醛树脂
酚醛树脂
phenolic resins;Bakelite

   酚与醛缩合聚合而成的一类合成树脂。英文缩写PF。它是一种热固性树脂,固化后是体型高分子。酚醛树脂在20世纪初研究成功,随后进行工业生产,成为第一个工业生产的合成高分子品种,并由此开创了合成高分子和塑料工业。酚醛树脂具有较好的绝缘性、耐热性、耐老化性和粘结性,制成增强塑料还显示较好的烧蚀性,价格便宜并易于生产。
   酚醛树脂的酚类原料常用苯酚,以及甲酚和其他烷基取代酚、双酚A、间苯二酚等;醛类以甲醛为主,也可用多聚甲醛和其他高级醛类、糠醛等。作涂料的酚醛树脂常用植物油类、松香等天然树脂改性;作胶粘剂时常混以环氧树脂、聚乙烯醇缩醛、丁腈橡胶等改性。
   当甲醛/苯酚(摩尔比)小于1时,可得热塑性产物,称热塑性酚醛树脂,即线型酚醛树脂,结构为:
   
   

图片

图片


   式中n<10。它不含进一步缩聚的基团,加固化剂并加热才能固化。如以六亚甲基四胺为固化剂,固化温度150 ℃,混以填料制成的模塑粉俗称电木粉。当甲醛/苯酚(摩尔比)大于1时,在碱催化下先得到甲阶段树脂,即热固型酚醛树脂,能溶于有机溶剂,结构为:
   
   

图片

图片


   式中m=0~2,l=0~1,k=0~1,n<10。甲阶段树脂含能进一步缩聚的羟甲基,因此不需加固化剂即能固化:加热下反应得到乙阶段树脂,又称半溶酚醛树脂,不溶不熔但可溶胀和软化。再进一步反应则得到不溶不熔的体型结构丙阶段树脂,也称不溶酚醛树脂。甲阶段树脂长期存放也能自行固化。
    酚醛树脂主要作为模压和层压塑料、涂料、油漆、胶粘剂,广泛应用在电子、电器、木材工业等,制成增强塑料,也作为烧蚀材料用于空间技术。酚醛树脂还可制成耐温、耐燃的纤维。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条