1) power consumption
电耗
1.
Electrical technology for power consumption reduction in chlor-alkali industry;
降低氯碱行业电耗的电气技术
2.
Innovation & circulation economy—the inevitable way to develop phosphate industry: Ⅲ.The influence of effective composition of raw materials for yellow phosphorus production on power consumption;
创新和循环经济是磷化工发展的必由之路:Ⅲ.生产黄磷原料的有效成分对电耗的影响
3.
Strengthened comprehensive management and lowering production power consumption;
加强综合管理 降低生产电耗
2) Electricity consumption
电耗
1.
All resistance of the FGD system and the influence of the GGH press difference on electricity consumption are analyzed.
系统分析了脱硫系统各部分阻力,针对GGH差压问题,分析了其对脱硫系统的电耗影响。
2.
It is pointed that this method reduce electricity consumption.
介绍了离子膜法生产烧碱中影响槽电压的因素及控制措施以降低电耗。
3) energy consumption
电耗
1.
By increasing the number of the bars, we decrease fiber cutting,increase fiber brooming,reduce reactive power,and reach the aim of improving pulp quality and reducing energy consumption.
低强度打浆就是根据比刀缘负荷理论对磨片进行改进,通过增加磨片齿数以利于在短纤浆的打浆过程中减少纤维切断,提高分丝帚化,减少打浆无功功率,达到提升成浆品质同时降低打浆电耗。
2.
This paper introduces the composition and the treatment process of sludge and energy consumption of dewaterizers in urban water treatment plant,the new development of sludge treatment techniques and the comprehensive uses of the sludge are evaluated.
介绍了城市给水厂污泥组成、处理工艺、污泥脱水机能耗,对给水污泥处理技术发展及污泥的综合利用进行了评价;首次提出了水厂排泥水回用节约电耗计算公式和经济效益计算公式,给出了算例,为水厂排泥水处理技术的应用提供了电耗方面的经济评价依据。
3.
It is found that high resistance slag may reduce energy consumption and increase prod uctivity because of its higher heat and electric effeciency.
采用两种渣系进行电渣重熔高速钢的实验，比较了重熔过程的电耗。
4) electric consumption
电耗
1.
Method of reducing electric consumption of caustic soda production at unstable running current;
运行电流不稳时降低烧碱电耗的途径
2.
According to excessive high unit consumption of direct-fired low speed pulverized system,electric consumption characteristic of direct-fired pulverized system,the arrangement of burners,and the effect of actual quality of fired coal on unit consumption of direct-fired pulverized system were thoroughly analyzed,the problems existing in the system were introduced and countermeasures were presented.
针对某厂直吹式低速球磨机制粉单耗偏高的问题,深入分析了直吹式制粉系统的电耗特性、燃烧器布置方式、实际燃用煤质对直吹式制粉单耗的影响,查找了制粉系统存在的问题,提出了解决问题的措施。
5) electric energy consumption
电耗
1.
It is successfully applied to the pulverized coal system in power plant to reduce electric energy consumption, and may become an effective way to decrease generation cost and save energy.
用该方法确定电厂制粉系统的最优运行方式 ,可有效地降低制粉电耗 ,是发电厂降低运行成本和节能的有效途
6) electricity consumption
耗电
1.
This paper presents the electricity consumption audit of 9 typical hotel buildings in Chongqing.
本文介绍了对重庆市9家典型三星级以上酒店年用电量调研的结果,对重庆市酒店类建筑的用电特点进行了分析,并对其中一家典型酒店的空调系统和耗电进行了测试。
2.
By means of REOF,wavelet analysis and correlation analysis,the characteristics of summer high temperature were analyzed and the air-conditioner electricity consumption per square meter in dwelling houses was calculated.
运用REOF、小波分析、相关分析等方法,对浙江省夏季高温特征进行了详细的分析,并计算了夏季各地每平方米住宅空调耗电量。
补充资料：注塑机工作原理和电耗
注塑机是一种专用的塑料成型机械，它利用塑料的热塑性，经加热融化后，加以高的压力使其快速流入模腔，经一段时间的保压和冷却，成为各种形状的塑料制品。 1、注塑机的工作循环 1）锁合模：模扳快速接近定模扳（包括慢-快-慢速），且确认无异物存在下，系统转为高压，将模板锁合（保持油缸内压力）。 2）射台前移到位：射台前进到指定位置（喷嘴与模具紧贴）。 3）注塑：可设定螺杆以多段速度，压力和行程，将料筒前端的溶料注入模腔。 4）冷却和保压：按设定多种压力和时间段，保持料筒的压力，同时模腔冷却成型。 5）冷却和预塑：模腔内制品继续冷却，同时液力马达驱动螺杆旋转将塑料粒子前推，螺杆在设定的背压控制下后退，当螺杆后退到预定位置，螺杆停止旋转，注射油缸按设定松退，预料结束。 6）射台后退：预塑结束后，射台后退到指定位置。 7）开模：模扳后退到原位（包括慢-快-慢速） 8）顶出：顶针顶出制品。 2、注塑机的电能消耗 注塑机的电能消耗主要表现在以下几个部分：①液压系统油泵的电能消耗 ，②加热器的电能消耗 ③循环冷却水泵的电能消耗（在注塑车间内，一般多台注塑机共用一台冷却水泵），其中液压油泵电机的用电量占整个注塑机用电量的80%以上，所以降低其耗电量是注塑机节能的关键。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条