1) strengthening mechanism
强化机理
1.
Research on the strengthening mechanism of vibration mixing recycled concrete;
再生集料混凝土的振动拌和强化机理研究
2.
Mechanical properties and strengthening mechanism of aluminum alloys containing zirconium;
含锆铝合金的力学性能和强化机理
3.
Mechanical properties and strengthening mechanism of high-strength low-carbon automobile steel plates produced by CSP technology;
CSP工艺生产低碳高强度汽车板力学性能特征及强化机理
2) strengthen mechanism
强化机理
1.
The composition and microstructure characteristics, processing theory and technology, properties and strengthen mechanism of this kind of materials were reviewed.
对快速凝固过共晶铝硅合金材料的成分、组织结构特点，制备理论及工艺，性能及其强化机理进行了综合评述。
3) strengthening mechanisms
强化机理
1.
The alloying principles and strengthening mechanisms of magnesium are introduced.
介绍了镁的合金化原理、强化机理和目前所用铸造镁合金的类型及存在的缺点,提出了改善铸造镁合金性能的途径。
2.
Contrast experiments were performed to compare the mechanical properties and shaping properties of the BH340 and BIF340 with those of domestic IF Steel St13,St14,and to analyze the strengthening mechanisms of BH340 and BIF340.
对钢板St13和BH 340、St14和BIF340的力学性能和成形性能进行了对比试验,并对BH 340和BIF340的强化机理进行了分析。
4) self strengthening mechanism
自强化机理
1.
The self strengthening mechanism of high and middle manganese steel hardfacing layer was also presented.
阐述了中高锰钢耐磨堆焊层的自强化机理。
5) strengthening and toughening mechanism
强韧化机理
1.
The structure,morphology,hardness,breaking toughness,high-temperature yield strength,strengthening and toughening mechanism of the RE/MoSi2 composites were investigated by means of X-ray diffraction(XRD),scanning electron microscope(SEM),Vichers hardness tester,electrical omnipotence material tester and dynamic heat simulate in this paper.
采用X射线衍射仪(XRD),扫描电子显微镜(SEM),维氏硬度计,电子万能材料试验机,动态热模拟机研究了稀土/MoSi2复合材料的结构、形貌、硬度、断裂韧性、高温屈服强度、强韧化机理等。
6) mechanism of strengthening and toughening
强韧化机理
1.
The mechanism of strengthening and toughening of crack-free Fe-based alloy with high hardness for laser cladding;
高硬度激光熔覆专用Fe基合金强韧化机理
2.
The authors review some research results of ceramic matrix nanocomposites both at home and abroad in recent years, including mechanical properties and their factors, uniform dispersing of nano particles and mixed with ceramic matrix, shape forming of the materials, its structure, the mechanism of strengthening and toughening.
结合部分作者的工作，综述近年国内外对纳米复合陶瓷材料的力学性能及影响因素、纳米颗粒在基质中均匀分散和混合及材料成型工艺、内部结构、强韧化机理等方面的研究结果。
3.
The paper introduces its concept,types and characteristics about an-quenched and an-tempered steel,and sum- marizes the application of un-quenched and un-tempered steel for sucker rod developed in China,then analyses the mechanism of strengthening and toughening.
文章介绍了非调质钢的概念、分类及其特点,总结了我国研制的非调质抽油杆钢的应用情况,分析了钢中元素作用及强韧化机理,指出不断发展的新型非调质钢将会使抽油杆生产迈上新台阶。
补充资料：L-H机理
分子式：
CAS号：
性质：又称L-H机理。一种以表面反应为控制步骤，以两个吸附着的分子进行表面反应的多相催化机理。即两个反应物先吸附在固体催化剂上，在表面上反应，产物再脱附。表面反应为控制步骤，吸附与脱附速度远大于表面反应速度。反应速度与两个反应物在催化剂表面上的覆盖度成正比。
CAS号：
性质：又称L-H机理。一种以表面反应为控制步骤，以两个吸附着的分子进行表面反应的多相催化机理。即两个反应物先吸附在固体催化剂上，在表面上反应，产物再脱附。表面反应为控制步骤，吸附与脱附速度远大于表面反应速度。反应速度与两个反应物在催化剂表面上的覆盖度成正比。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条