说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 基本性能
1)  basic properties
基本性能
1.
The basic properties and engineering applications of silica fume concrete;
硅粉混凝土的基本性能与工程应用
2.
Research on the basic properties of recycled aggregate and recycled concrete;
再生骨料及再生混凝土基本性能研究
3.
The basic properties of recycled aggregates produced with the new technology were tested and compared to those of recycled aggregates from normal producing procedure.
测试了利用新工艺生产的再生骨料的基本性能,并与天然骨料和常规再生骨料工艺生产的再生骨料进行了对比。
2)  basic performance
基本性能
1.
Experimental study on the basic performance of recycled aggregate concrete with different displacement ratio;
不同再生骨料取代率混凝土的基本性能试验研究
2.
Analysed feasibility that regenerated aggregate utilize,test to regenerated basic performance of concrete,and put forward the suggestion for development and use of the regenerated concrete.
本文分析了再生骨料利用的可行性,对再生混凝土的基本性能进行了测试,并为再生混凝土的发展与利用提出了建议。
3.
In the computer aided testing device of the mechanical seal system,the experimental investigations on the basic performance of the GY70 mechanical seal has been carried out.
对GY70型机械密封的基本性能进行了试验研究,得出了弹簧比压、介质压力以及转速对机械密封泄漏量和摩擦功耗的影响规律。
3)  basic property
基本性能
1.
Regarding to complexity in types and properties of waste concrete in practical engineering, system test was made on basic property of 6 kinds of recycled aggregates which were produced by crashing and processing abandon concrete from 4 different sources i.
针对实际工程中废弃混凝土种类和性能复杂多变的特点,系统测试了由4类不同来源(拆除的废旧建筑物、预制构件厂不合格构件、废弃马路路面和试验室废弃试件)废弃混凝土破碎加工而成的共6种再生骨料的基本性能
4)  fundamental performance
基本性能
1.
Study on fundamental performance of pulsed liquid jet pump;
脉冲液体射流泵基本性能的研究
5)  fundamental property
基本性能
1.
The fundamental property and application field of aluminum matrix composite were briefly introduced, the major research findings and focus problems in recent years were summarized.
介绍了铝基复合材料的基本性能及其应用情况,重点总结了近几年关于铝基复合材料的主要研究成果以及热点问题,指出了铝基复合材料的发展趋势。
6)  elementary propenies
基本性能摇
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条