1) thermal shock resistance
热震性能
1.
The thermal shock resistance was evaluated.
为了研究纳米热障涂层的热震性能,采用等离子喷涂工艺制备了纳米Y2O3-ZrO2(YSZ)热障涂层,并测试了涂层的热震性能。
2.
In order to study the thermal shock resistance and thermal shock failure mechanism of Al_2O_3-TiO_2/NiCoCrAlY coatings,the samples were heated to 400℃ and hold a certain time then cooled to room temperature by quenching.
在 ZL104铝合金基体上喷涂了 Al_2O_3-TiO_2/NiCoCrAlY 系梯度涂层和 Al_2O_3-TiO_2非梯度涂层,对这两种试样进行了室温400℃冷热循环试验,以研究涂层的抗热震性能和热震失效机制。
3.
The microhardness, bonding strength and thermal shock resistance were tested.
运用扫描电镜对涂层显微结构进行观察和分析,同时测试了涂层的显微硬度、结合强度和热震性能。
2) thermal shock properties
热震性能
1.
The microstructure,microhardness and thermal shock properties of plasma sprayed coatings NiCr/Cr3C2,NiCrCoAlY are researched in this paper.
研究分析了等离子喷涂NiCrC/r3C2、NiCrCoAlY涂层的微观组织结构,并对2种涂层进行了显微硬度及抗热震性能实验。
2.
And then the microhardness and thermal shock properties of the coatings were measured.
通过等离子喷涂方法在穿孔顶头尾部材料42CrMo钢表面分别制备NiCr-Cr3C2涂层和Al2O3(13%TiO2)涂层,运用OM,XRD,SEM等分析测试手段对涂层的组织、形貌和物相成分进行表征,并对两种涂层进行了显微硬度及抗热震性能实验。
3) thermal shock performance
热震性能
1.
Microstructural change and thermal shock performance of metal/ceramic graded thermal barrier coatings in thermal shock experiments were studied by scanning electron microscope and energy dispersive spectrometry.
利用扫描电子显微镜和能谱成分分析技术研究了金属 /陶瓷梯度热障涂层在热震过程中的显微组织变化及其抗热震性能 。
2.
The performance index shows shat obsolute AZS materials can increase the thermal shock performance of the bricks, and have good erosion-resisting and erosion-flushing characteristics on h.
结果表明,电熔AZS回收料的引入,增大了基质的高温黏度,改善了制品高温显微结构,有利于制品热震性能的提高,并对高钙渣系具有良好的抗冲刷性能以及抗侵蚀性能。
4) thermal shock failure
热震性能
1.
The results show that the coatings containing TiB2/Al2O3 and Cr3C2 exhibit favorable porosity, adherence, wear resistance and good resistance to thermal shock failure, in general, superior to those of Al2O3/ TiO.
涂层常规性能测试结果表明:含TiB2/Al2O3和Cr3C2 的涂层的孔隙率较低、结合强度高、具有优良的耐磨性及抗热震性能。
5) thermal shock resistance
抗热震性能
1.
Microstructure and thermal shock resistance of YPSZ gradient coating fabricated by plasma spraying
等离子喷涂YPSZ陶瓷梯度涂层的组织与抗热震性能
2.
The thermal shock resistance of plasma-sprayed ZrO2 thermal barrier coatings under the conditions of water quenching and flame jet was studied.
为了进一步了解等离子喷涂ZrO2涂层的制备及失效控制措施,提高涂层的使用寿命,研究了涂层在水淬和火焰喷烧两种条件下的抗热震性能。
3.
The thermal stress fracture resistance factor R is used to characterize the thermal shock resistance of the ceramic material.
抗热震性能是结构陶瓷材料的重要性能之一。
6) thermal-shock resistance
抗热震性能
1.
Its thermal-shock resistance was studied.
分别采用超音速火焰喷涂技术(HVOF)与大气等离子喷涂技术(APS)喷涂NiCrAlY粘结底层和纳米氧化锆工作面层获得了典型的双层结构热障涂层,并采用设计试验对其抗热震性能进行了研究。
2.
Density,porosity,hardness and thermal-shock resistance was measured.
通过对样片密度、气孔率和硬度的测定,以及对试验材料显微结构的观察,分析了烧结助剂、粉体制备工艺和烧结工艺对氧化镁陶瓷抗热震性能的影响。
3.
The thermal-shock resistance of Al2O3,Al2O3/TiC and cobalt-coated Al2O3/TiC composites were studied by residual-strength method.
采用急冷-强度法表征了单相Al2O3、Al2O3/TiC及Co包覆Al2O3/TiC三种材料的抗热震性能。
补充资料：震
【震】
震者，隐隐出声之谓。震有三相：一方独震名震，四方俱震名遍震，八方齐震名普遍震。
震者，隐隐出声之谓。震有三相：一方独震名震，四方俱震名遍震，八方齐震名普遍震。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条