说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 异步电动机
1)  asynchronous motor
异步电动机
1.
Application of 6RA70 digital DC speed regulating device in the power braking of asynchronous motor;
6RA70直流传动装置在异步电动机动力制动中的应用
2.
Analysis on causes for burning of winding of asynchronous motor underground coal mine;
煤矿井下异步电动机绕组烧毁原因分析
3.
Study on the relationship between economizing energy and power factor of asynchronous motor;
异步电动机节能与功率因数关系的研究
2)  induction motor
异步电动机
1.
Analysis of computing method of rotor phase inductance X_(20) of induction motor;
异步电动机转子相感抗X_(20)计算方法分析
2.
Torque ripple minimization in direct torque control of induction motors;
直接转矩控制的异步电动机转矩脉动最小化
3.
Fuzzy PI control of induction motor of electric vehicle based on Matlab/Simulink;
基于Matlab/Simulink电动汽车异步电动机模糊PI控制
3)  asynchronous motors
异步电动机
1.
Measurement for mechanical characteristics of asynchronous motors using electromagnetic brake;
磁粉制动器对异步电动机机械特性的测量
2.
A calculating method on asynchronous motors operation in reducing stator voltage;
异步电动机降压运行时的一种计算方法
3.
Development and the present condition of positioning control technology of asynchronous motors;
异步电动机定位控制技术研究现状及发展展望
4)  induction motors
异步电动机
1.
Rotor fault detection of squirrel-cage induction motors based on local wave analysis of the starting stator current;
基于定子起动电流局域波分析的鼠笼异步电动机转子故障检测
2.
This paper focus on the study of rotor faults diagnosis using current monitoring method for squirrel cage induction motors, and concludes several effective methods such as FFT, wavelet, park s vector approach and artificial neural network method.
对多年来国内外关于笼形异步电动机利用定子电流检测法诊断转子故障进行了研究,并归纳和总结出几类方法:傅里叶变换方法、小波分析方法、基于park变换的方法以及神经网络方法。
3.
The accuracy of the linerized reduced order of induction motors as applied to dynamical stability study is investigated.
介绍了异步电动机全阶数学模型的线性化和降阶的原理,并探讨了降阶模型的准确性问题。
5)  asynchronous electromotor
异步电动机
1.
Discussion on the application of the thyristor soft starter of the asynchronous electromotor;
异步电动机晶闸管软起动器的应用探讨
2.
The determination of the value of starting capacity in singer-phase asynchronous electromotor with parallel method;
用平行法确定单相异步电动机的启动电容
3.
The paper puts forward a method of calculating resistance in the spot based on the moving characteristic of wound primary tape three-phase asynchronous electromotor.
根据电机学原理中三相异步电动机的起动特性 ,提出了一种在现场使用简单方便的计算起动电阻的方法 ,并举例说明了其计算过程。
6)  synchronous induction motor
同步异步电动机
补充资料:异步电动机
      作电动机运行的异步电机。因其转子绕组电流是感应产生的,又称感应电动机。异步电动机是各类电动机中应用最广、需要量最大的一种。各国的以电为动力的机械中,约有90%左右为异步电动机,其中小型异步电动机约占70%以上。在电力系统的总负荷中,异步电动机的用电量占相当大的比重。在中国,异步电动机的用电量约占总负荷的60%多。
  
  异步电动机的基本特点是,转子绕组不需与其他电源相连,其定子电流直接取自交流电力系统;与其他电机相比,异步电动机的结构简单,制造、使用、维护方便,运行可靠性高,重量轻,成本低。以三相异步电动机为例,与同功率、同转速的直流电动机相比,前者重量只及后者的二分之一,成本仅为三分之一。异步电动机还容易按不同环境条件的要求,派生出各种系列产品。它还具有接近恒速的负载特性,能满足大多数工农业生产机械拖动的要求。其局限性是,它的转速与其旋转磁场的同步转速有固定的转差率(见异步电机),因而调速性能较差,在要求有较宽广的平滑调速范围的使用场合(如传动轧机、卷扬机、大型机床等),不如直流电动机经济、方便。此外,异步电动机运行时,从电力系统吸取无功功率以励磁,这会导致电力系统的功率因数变坏。因此,在大功率、低转速场合(如拖动球磨机、压缩机等)不如用同步电动机合理。
  
  由于异步电动机生产量大,使用面广,要求其必须有繁多的品种、规格与各种机械配套。因此,异步电动机的设计、生产特别要注意标准化、系列化、通用化。在各类系列产品中,以产量最大、使用最广的三相异步电动机系列为基本系列;此外还有若干派生系列(在基本系列基础上作部分改变导出的系列)、专用系列(为特殊需要设计的具有特殊结构的系列)。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条