1) high temperature wear
高温磨损
1.
High temperature wear tests for 3Cr2W8V steel were performed by a pin-on-disk high temperature wear apparatus.
采用销盘式高温磨损试验机对3Cr2W8V钢进行高温磨损试验,研究了淬火温度对3Cr2W8V钢磨损性能的影响,采用SEM、EDS、XRD分析磨损表层成分、形貌和结构,探讨高温磨损机制。
2.
The surface roughness, microhardness and high temperature wear loss were measured.
采用三种爆炸喷涂工艺在SCH19耐热钢基体上制备CoNiCrAlYAl2O3高温耐磨涂层,借助XRD、SEM和EDS等技术对涂层的组织结构进行分析,并检测涂层的表面粗糙度、显微硬度和高温磨损失重。
3.
Thehigh temperature wear mechanism of the steel is oxide fat.
研究了不同wV/wC对Cr-Mo-V精铸热锻模具钢的高温磨损性能的影响,并探讨了其磨损机理。
2) high-temperature wear
高温磨损
1.
Study and analysis is made of the effect of the high-temperature wear test parameters on high-temperature wear resistance of WC/steel composites material under different heat-treatment condition.
研究了在不同热处理条件下,高温磨损试验参数对WC/钢复合材料(GJH—2合金)高温抗磨损性能的影响。
2.
The high-temperature wear property of a new type precision cast hot-forging die steel was apparently affected by the alloy elements Mo.
合金元素Mo能明显影响新型精铸热锻模具钢高温磨损性能,分析了铸钢硬度及高温磨损后表面形貌。
3) high temperature abrasive wear
高温磨料磨损
1.
The high temperature abrasive wear test was carried out on a high temperature friction and wear test rig whose test atmosphere can be controlled.
通过改变 Cr- Ni合金铸铁中共晶碳化物的抗氧化稳定性 ,在可控气氛高温磨料磨损试验机上研究了碳化物及其与基体的氧化协同性对合金耐高温磨料磨损能力的影响 。
2.
The influence of the stability of eutectic carbide in high Cr-Ni cast iron on abrasive wear resistance has been investigated on a high temperature abrasive wear tester, in which atmosphere can be controlled.
在可控气氛高温磨料磨损试验机上考察了高Cr－Ni铸铁中共晶碳化物高温稳定性对合金高温磨料磨损抗力的影响。
4) high temperature abrasive wear
高温磨粒磨损
1.
A new type high temperature abrasive wearing tester and its experimental evalwation;
新型高温磨粒磨损测试装置及方法
5) high temperature friction wear
高温磨擦磨损
6) high temperature erosion
高温冲蚀磨损
1.
In this peper the authors investigated on prupose structures and properties of the nickel based alloy aplay welding layers, considering the serious actual situation of high temperature erosion of the pipes of economizers of eoal-fired power station,It has bee shown that there are the comple structures.
从发电厂锅炉省煤器管道高温冲蚀磨损的严重现实问题出发。
补充资料：表面磨损
分子式：
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
CAS号：
性质：两表面接触并作相对运动所产生的微弱摩擦导致了缓慢的材料消耗。根据相对运动的特点，分成滑动磨损，转动磨损，冲击磨损三种。通常认为接触压力较小，表面材料消耗不大的属表面磨损，相反的情况，可归入表面磨耗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条