1) CFRP
碳纤维复合材料
1.
Research on CFRP Outer-Tube of BESⅢ Drift Chamber;
北京正负电子对撞机(BEPC)BESⅢ漂移室碳纤维复合材料外筒的研制
2.
APPLICATION OF THERMAL EXPANSION TECHNOLOGY IN MOLDING OF CFRP;
热膨胀成型工艺应用于碳纤维复合材料
3.
Present situation of CFRP used in structure member strengthening;
碳纤维复合材料在结构加固中的应用现状
2) carbon fiber composite
碳纤维复合材料
1.
Study on properties of matrix resins and carbon fiber composites for resin transfer moulding;
一种适合于树脂传递模塑成型工艺的树脂基体及其碳纤维复合材料性能
2.
Numerical analysis of carbon fiber composite infrared nondestructive testing
碳纤维复合材料红外无损检测的数值分析
3.
Upon wide application of corrosion-resisting aluminum alloy and carbon fiber composite to aerospace industry,the contact between them is inevitable.
随着防锈铝和碳纤维复合材料在航空航天工业的广泛应用,它们间的接触不可避免。
3) carbon fiber composites
碳纤维复合材料
1.
Pulse-echo based ultrasonic attenuation model for porosity test of carbon fiber composites;
碳纤维复合材料孔隙率的脉冲反射法超声衰减测试模型
2.
Discussion on fatigue damage theory of carbon fiber composites;
论碳纤维复合材料疲劳损伤理论
3.
This paper studies the properties in hot or/and wet conditions of 5405 resin casts and carbon fiber composites T300/5405.
本文研究了该树脂浇铸体及其碳纤维复合材料有关热、湿方面的性能。
4) carbon fiber reinforced plastic
碳纤维复合材料
1.
Frequency spectral analysis for the ultrasonic attenuation of carbon fiber reinforced plastics;
碳纤维复合材料对超声衰减的频域分析
2.
Three types of carbon fiber reinforced plastic (CFRP) materials,T300/5222、T300/5405 and T300/QY8911 were used,electrically coupled to the aluminum alloys LY12CZ、7B04 and 2D70.
采用全浸腐蚀、腐蚀失重测量、电偶电位和电偶腐蚀电流等试验研究方法 ,将T30 0 / 5 2 2 2、T30 0 / 5 4 0 5和T30 0 /QY8911三种碳纤维复合材料与LY12CZ、7B0 4和 2D70三种铝合金相互偶接 ,研究由于电偶腐蚀的存在 ,对铝合金及复合材料腐蚀行为的影响 ,用SEM方法观察其腐蚀形貌 。
3.
In the process of carbon fiber reinforced plastic (CFRP), the optic fiber embedded in CFRP endures high pressure and temperature and shifts the optical performance of optic fiber.
在碳纤维复合材料结构的固化过程中 ,埋入其中的光纤将承受恶劣的环境 ,这将使光纤的光学性能发生变化 ,从而影响碳纤维智能复合材料结构中光纤传感系统的性能。
5) carbon fiber reinforced plastics
碳纤维复合材料
1.
A morphological study of voids and a statistical study of the voids' morphological features in carbon fiber reinforced plastics (CFRP) were implemented using microscopy and image analyzing system.
借助显微照相分析系统,对碳纤维复合材料孔隙形态特征进行观察和统计分析。
2.
The microwave reflectivity of carbon fiber reinforced plastics (CFRP) with various plies (0,0/90,30,45,60) have been studied.
研究了各种铺层（０°、０°／９０°、±３０°、±４５°、±６０°）方式碳纤维复合材料（ＣＦＲＰ）的微波反射特性。
3.
Denoising analysis based on lifting scheme was conducted,and five different lifting schemes such as 5/3,2/6,2/10,5/11-C,and 13/7-T were used to denoise the ultrasonic signals of carbon fiber reinforced plastics samples.
对提升框架的基本理论和基于提升框架的去噪方法进行了研究,分析了五种不同提升框架类型(5/3,2/6,2/10,5/11-C和13/7-T)对碳纤维复合材料的超声信号的去噪效果。
6) carbon Fiber composite material
碳纤维复合材料
1.
The structure design of a carbon fiber composite material antenna is presented from aspect of ensuring strength and rigidity of the antenna as well as accuracy of the reflector.
从保证天线的强度、刚度以及反射面精度等几个方面,介绍了某碳纤维复合材料天线的结构设计,并用有限元分析软件ANSYS10。
补充资料：用碳纤维复合材料制作的电镀液泵端面密封环和轴承
用碳纤维复合材料制作的电镀液泵端面密封环和轴承
柑 谈纤维最全祠川制‘的一色饭液泵炭面密封以为袖承 卜山戈扮乍-一少研乙「「笑编
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条