说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 多输入多输出
1)  MIMO
多输入多输出
1.
Robust Adaptive Control of MIMO Nonlinearly Parameterized Systems;
多输入多输出非线性参数系统的鲁棒自适应控制
2.
The Reconstruction of Stochastic Waveform of MIMO Test System in Time Domain;
多输入多输出试验系统的随机波形时域再现
3.
Study of the interference reducing capability of time reversal techniques in underwater acoustic MIMO systems;
时间反转技术对水声多输入多输出系统干扰抑制性能的研究
2)  multiple-input multiple-output
多输入多输出
1.
Then comparisons are performed between the GDAS and the traditional multiple-input multiple-output (MIMO) system to analyze the ergodic capacity of the GDAS and make conclusions that it is impossible to achieve an analytical expression for the ergodic capacity of the GDAS.
通过与传统多输入多输出系统的比较,对广义分布式天线系统容量进行了分析,并得出广义分布式天线系统历经容量完整的解析表达式是不可能存在的。
2.
To solve the problem that zero forcing methods and orthogonalization methods cause severe noise amplifying at the receiver side in multiuser multiple-input multiple-output downlink system,an iterative beamforming method for joint precoding of transmit and receive is proposed.
针对多用户多输入多输出系统下行链路线性预编码中的迫零法及正交化法对接收端的噪声有较强放大作用的问题,提出了一种发射与接收联合预编码的波束成形迭代法。
3)  multiple input multiple output
多输入多输出
1.
Study of multiple input multiple output frequency domain parameter estimation method;
多输入多输出频域模态识别算法的探讨
2.
Focusing on the problem that the performance of channel estimation is influenced by spatial correlation in multiple input multiple output(MIMO) systems,a parametrical channel estimation method based on estimating multipath parameters is proposed.
针对多输入多输出(MIMO)系统中信道空域相关影响信道估计性能的问题,提出了一种基于多径参数估计的信道估计方法。
3.
Focusing on the problem that joint transmission based on partial feedback channel state information cannot effectively cancel the interuser interference in multiuser multiple input multiple output downlink systems,a joint transmission scheme that allows independent signal detection for each user was proposed.
针对多用户多输入多输出下行链路中,基于部分信道状态信息反馈的联合发送方法不能有效抑制多用户间相互干扰的问题,提出了一种支持各用户信号独立检测的多用户联合发送方案。
4)  multiple-input multiple-output(MIMO)
多输入多输出
1.
In wireless communication channels, multiple-input multiple-output(MIMO) systems with space-time block codes(STBC) are usually used to eliminate multipath fading, wherein multiple access interference is very serious.
在无线衰落的通信信道中,空时编码的多输入多输出的(MIMO)系统具有很好的性能,但是多址干扰也很严重。
2.
The capacity of multiple-input multiple-output(MIMO) for point-to-point single user systems operating in incorrelated Rayleigh flat fading is considered with the assumptions that perfect channel side information (CSI) is available at receiver.
文中考虑独立Rayleigh衰落环境下的单用户点对点多输入多输出系统,假定接收端能准确估计信道状态信息,推导出系统的容量公式,相比单天线系统,多天线系统能取得更大的容量,当输入信号是高斯分布时,系统容量随着发射天线和接收天线数目的最小值线性增加,如果发送端完全知道信道状态信息,采用注水原理的功率分配策略,可以获得更高的容量增益,最后推导出各态历经容量的数学表达式。
3.
The water-filling power allocation algorithm can achieve the maximal capacity of multiple-input multiple-output(MIMO) systems with no additional power and bandwidth consumption.
在不额外增加发射功率和带宽消耗的情况下,注水功率分配算法能够获得最大的多输入多输出(MI-MO)系统容量。
5)  multi-input multi-output
多输入多输出
1.
Study of Multi-input Multi-output Encoding Technique;
多输入多输出(MIMO)编码技术研究
2.
An antenna selection(AS) algorithm with variable antenna number based on eigenvalue criterion for correlated multi-input multi-output(MIMO) systems is proposed to satisfy the requirements of wireless communication under different space correlation environments.
提出了多输入多输出相关信道下基于特征值准则的可变数目收发天线选择算法,来动态适应相关性不同的无线环境的通信要求。
3.
A logic optimization algorithm is presented about multi-input multi-output IC based on expanding products.
对于二级SOP型的多输入多输出逻辑函数,设计了基于积项扩展的多输入多输出集成电路逻辑优化软件,允许的最大输入变量数为128、最大输出变量数为256、最大输入输出变量总和为300、最大输入积项数为20 000,并通过了Benchmark例题的测试和正确性验证。
6)  Multiple-Input Multiple-Output (MIMO)
多输入多输出
1.
Multiple-Input Multiple-Output (MIMO) technique is an effective way to achieve high capacity and (or) to improve the reliability.
多输入多输出(MIMO: Multiple Input Multiple Output)技术给我们指出了一条利用空间维度来提高系统容量和(或)可靠性的有效途径,而MIMO系统接收端的设计最终会极大地影响系统的传输速率、误码率性能和系统复杂度。
2.
The multiple-input multiple-output (MIMO) technology can be used to improve the capacity,signals error probability and frequency efficiency significantly without extra frequency bandwidths and transmitted power.
多输入多输出(MIMO)技术在不增加带宽和发射功率的情况下,能够大幅提高系统容量、误码率性能和频带利用率。
3.
In this paper,the impact of channel estimation error on the performance of multiuser Multiple-Input Multiple-Output (MIMO) transmission based on limited feedback information is analyzed.
该文针对存在信道估计误差的有限反馈多用户多输入多输出(MIMO)传输性能进行分析。
补充资料:图形输入输出设备


图形输入输出设备
graphics input output device

  来选择或激活一个事件或过程的设备,由一组称为功能开关的专门按键来实现。图形输人板和鼠标器上一般都带有几个功能按键,这些按键的实际功能由交互式图形软件来确定。⑤键盘:一群按一定格式安排的按铆在图形系统中键盘可看作为一个通用的输人设备,因为它可以执行定标、定值、检取和按钮这儿种逻辑功能。在处理文字、数字信息时都要用到,是必配设备之 图形输出设备根据图形输出的特点,与最常用的图形输出设备—图形显示器分类相似,将其他图形输出设备也分为随机扫描式和顺序扫描式两类:①随机扫描式:绘图笔或打印头是随机运动,奴笔式绘图仪、平板式绘图仪、混合式绘图仪等。②顺序扫描式:绘图笔或打印头在作水平方向扫描的同时也作垂直方向扫描运动。如各种击打式打印机和非击打式打印机:点阵打印机·电子照相印刷机、静电式印刷机、传热印刷机、喷墨式印刷机口、 显示或打印的分辨率、色彩数等是图形输出设备的重要指标。 随着电子工业的飞速发展,图形输人输出设备朝着高速度、高质量方向发展。新近的图形输人设备,象空间球等能提供六个自由度的选择,一成为交互图形操作的重要手段。又如图文扫描仪,可高速地输入有灰度或颜色的图文信息,已成为图文自动输入的重要工具。__t日X ing shUrU shUChu shebe-图形输入输出设备(graphieo input outputdevice)用来向计算机发送或从计算机接收图形信息的设备。常用的图形输入设备有:数字化板、操纵杆、鼠标器、光笔、控制盘、功能开关(或按键)、扫描仪、摄像机、飞行鼠标、数据手套、空间球等。常用的输出设备有:图形显示器、绘图仪、彩色或单色击打式打印机、喷墨打印机、激光印字机、静电印刷机、热敏印刷机、照相底片记录仪等。在生成、修改或拷贝图形时都要用到图形输人设备或图形输出设备,它是计算机图形学的重要组成部分。 图形输入设备按其逻辑功能又可分定标器、定值器、检取器、按钮、键盘五种:①定标器:提供二维或三维坐标信息的设备,如图形输人板、鼠标器、扫描仪、摄像机、操纵杆、三维声波绘图板、飞行鼠标、数据手套、空间球等。②定值器:提供单个数值的设备,如控制盘等。③检取器:用来识别或挑选所显示图形中感兴趣的对象或子图形的设备,如光笔等。④按钮:用
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条