说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 成品率
1)  Yield [英][ji:ld]  [美][jild]
成品率
1.
The Application of Mathematic-Statistical Method in IC Mass Production──On the Relationship Between Processing Capability Index and Yield;
数理统计方法在IC大生产中的应用──试论工序能力指数与成品率的关系
2.
Optimization Design and Yield Forecast for IC;
IC优化设计及其成品率预测
3.
Quality Control for Yield of 125mm Silicon Wafer;
Φ125mm硅抛光片成品率的控制
2)  finished product rate
成品率
1.
Theoretical method for determining cleanliness class from IC finished product rate;
由集成电路成品率确定空气洁净度级别的理论方法
2.
Experimental study on dainty and finished product rate of submerged plant feedstuff based on different technology parameters of beater pulverizer;
锤片式粉碎机工艺参数对水草饲料适口性和成品率影响的试验研究
3.
The mathematical model of finished product rate is developed in order to realize the microcomputer management of finished product rate.
建立了铸件成品率的数学模型,以实现铸件成品率的微机管理。
3)  rate of finished products
成品率
1.
Because it is difficult to control rolling process of molybdenum sheet, there is much defective material and low rate of finished products.
钼板轧制工艺过程难以控制,轧废现象严重、成品率低,导致生产成本增大,因而寻求适宜的加工工艺势在必行。
4)  product rate
成品率
1.
Summary on sinter ore strength and product rate;
浅谈烧结矿的强度与成品率
2.
The results show that the sintering ability is poor,and will possess unfavorable effect on sinter tumbler strength,product rate and metallurgical property.
结果表明,高品位攀精矿烧结性能较差,对烧结矿转鼓强度、成品率及冶金性能有不利影响。
3.
Low product rate during the drying process was a key problem.
对绿豆芽的前处理工艺进行了研究,特别是对生产过程中存在成品率低的缺点进行了重点研究,在保持成品较好的色泽、饱满度的前提下找到了提高产品成品率较佳的前处理方案,即采用5%的盐水漂烫,然后用20%的糊精溶液浸泡处理,最后用5%的乳糖和5%的食盐对物料进行复合调理。
5)  IC yield
IC成品率
6)  yield map
成品率图
补充资料:烧结、球团成品率


烧结、球团成品率
yield of finished product of sintering and pelletizing

shaoj浦e qiutuan ehengPinl。烧结、球团成品率(yield。f finished produetof sinteringand pelletizing)烧结成品率为干烧结料〔其中包括返矿)的成品烧结矿产出率;球团成品率为干球团料(其中包括返矿)的成品球团矿产出率。用公式表示为p一(Q。/Q:)x10o%。尸为烧结料或球团料的成品率,%;Q:为成品烧结矿或球团矿的数量,t;Q:为干烧结料或干球团料的数量,t。 烧结料和球团料的成品率,实为二者的收得率。在铁矿石造块工艺操作稳定的条件下,返矿量基本不变,P值大小仅与烧结料或球团料的烧损量有关,配人烧损量大的物料多,p值小;反之,尸值大。因此,造块配料的矿石种类、燃料和熔荆的数量,对尸值都有直接影响。在原料条件和造块成分确定之后,烧损量变化不大,尸值取决于造块工艺操作水平,凡能提高烧结矿和球团矿强度和降低返矿量的操作,都将使QZ增加,Ql减少,结果尸值升高。提高烧结料和球团料的成品率,是提高二者生产率和降低能耗的重要途径之一。此外,还可以用尸值变化情况检验操作制度的合理性。 除烧结料成品率外,还有烧结矿成品率的指标,即单位质量烧结饼(即全部烧结残存物)中成品烧结矿的数量。它同烧结矿强度直接有关。 (朱家骥)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条