说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 快速冷凝
1)  rapid solidification
快速冷凝
1.
This paper has analyzed the reasons of the brittleness of rapid solidification Al-Li alloys and introduced some main toughening methods in manufacturing,forming and heat treatment of the alloys.
通过对快速冷凝 (RS)Al-Li合金低塑韧性原因的分析 ,介绍了Al-Li合金制备、成材、热处理等过程中一些主要韧化途径 ,并简单讨论了获得较好综合性能的Al-Li合金制品的工艺方法及大致工艺参数范
2.
The microstructure and effect of grain refining of Al-Ti-B interalloy rods prepared by the process of rapid solidification-extrasion have been investigated by means of X-ray diffrac-tion,SEM and optical microscope in this paper.
借助X射线衍射、扫描电镜、金相显微技术等手段,对采用快速冷凝喷粉或离心制粒-挤压法制得的Al-Ti-B中间合金线杆的组织结构和其晶粒细化效果进行了研究。
3.
By means of rapid solidification,Al-Cu-Fe-Zn alloy powders were produced.
本文通过快速冷凝方法制得了Al-Cu-Fe-Zn系合金粉末。
2)  flash condenser
快速冷凝器
3)  gas instantaneous water heater with condensation
冷凝式燃气快速热水器
1.
On the basis of theory analysis of the relation between heat efficiency and flue gases temperature of the natural gas instantaneous water heater with condensation ,the relation between heat efficiency and flue gas temperature of the gas instantaneous water heater with condensation through experiment is obtained.
试验结果表明冷凝式燃气快速热水器有很好的实用价值。
2.
According to the theoretical analysis of energy saving effectiveness of gas instantaneous water heater with condensation, the relationship between heat efficiency and flue temperature of natural gas instantaneous water heater with condensation has been obtained through experiment.
根据对冷凝式燃气快速热水器节能效果的理论分析,并通过试验得出冷凝式天然气快速热水器热效率与其排烟温度的关系。
4)  rapid solidification
快速凝固
1.
Rapid Solidification of Cu-10Ag Alloy Droplets by Ultrasonic Arc Spray Atomization;
超音速电弧喷射雾化Cu-10Ag合金熔滴的快速凝固
2.
Carbide and its stability in FGH95 superalloy powders during rapid solidification;
快速凝固FGH95合金粉末中的碳化物及其稳定性
3.
Microstructure evolution of hypereutectic Al-Si alloy during rapid solidification;
过共晶Al-Si合金快速凝固组织演变
5)  rapidly solidification
快速凝固
1.
Microstructure and property of Mg_(80)Cu_(15)Y_5 alloy by rapidly solidification and hot extrusion
热挤压快速凝固Mg_(80)Cu_(15)Y_5合金棒材的组织与性能
2.
The effects of rapidly solidification on the microstructure and the corrosion behavior of Mg-5Zn-1Y-0.
研究了快速凝固Mg-5Zn-1Y-0。
6)  melt spinning
快速凝固
1.
3~1) are prepared by means of vacuum arc melting followed by high temperature annealing and quenching or melt spinning method.
0)在常规熔铸、高温退火+淬火及快速凝固不同制备条件下的组织结构和电化学性能。
2.
4 were prepared using conventional cast, rapid solidification (melt spinning) and annealing processes.
4 在常规熔铸、快速凝固、退火处理不同制备条件下的组织结构和电化学性能。
补充资料:冷凝
分子式:
CAS号:

性质:使热物体的温度降低而发生相变化的过程。通常指使气态物质经冷却而变成液态的过程。例如水蒸气冷凝而成水。通常有膜状冷凝和滴状冷凝两种。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条