说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 临界试样厚度
1)  critical specimen thickness
临界试样厚度
1.
Then the critical specimen thickness was determined and the in.
5 mm的DP600点焊结构拉剪测试失效模式,建立DP600点焊结构发生分界面断裂失效的概率与熔核长度和板厚的关系模型,从而确定其临界试样厚度,以及熔核长度对临界试样厚度的影响。
2)  Critical thickness
临界厚度
1.
Theoretical research on critical thickness of HgCdTe epitaxial layers;
HgCdTe外延薄膜临界厚度的理论分析
2.
Determination of critical thickness of 12Cr2Mo1R heavy plate for equipments under critical hydrogen
临氢设备用12Cr2Mo1R厚钢板临界厚度研究
3.
The definition of critical thickness was specifically put forward for the first in this article.
通过对脱脂动力学的分析,发现在脱脂过程中,存在动力学控制步骤转化的过程,提出了临界厚度的概念。
3)  sample thickness
试样厚度
1.
The influences of sample thickness on the anisotropy effect of interface energy and the adjustment mechanism of lamellar spacing in the initial transient of eutectic solidification were investigated.
7%C2Cl6(摩尔分数),对共晶合金定向凝固界面演化进行了实时观察,研究了初始非稳态凝固过程中试样厚度对于共晶合金界面能各向异性效应及层片间距调整机制的影响规律。
4)  specimen thickness
试样厚度
1.
The results indicate that the appearance toughness of X 60 steel is independent on the thickness of specimen due to the couple effect of delamination cracks and out_of_plane stress constraint in direction of specimen thickness.
研究结果表明 ,由于试件厚度与分层裂纹间有强烈的耦合效应 ,表观断裂韧性不随厚度的变化而变化 ,靠增加试样厚度无法获得材料的平面应变断裂韧性 ,应用穿透裂纹的表观断裂韧性数据进行管道的安全评定不可靠 ;考虑塑性区修正的有效应力强度因子Ke与弹塑性J积分参量KJ 在失稳扩展前保持了良好的等效性。
2.
Experimental and analytical studies of effect of specimen thickness on fatigue crack growth behavior were carried out in domestic 2024 T351 aluminum alloy.
进行了国产2024-T351铝合金在单峰过载条件下试样厚度对疲劳裂纹扩展性能影响的试验和分析研究。
3.
The effects of temperatures,notch sizes,R-ratios and specimen thickness on fatigue crack growth behaviors were studied.
讨论了高温环境、缺口半径、应力比及试样厚度对疲劳裂纹扩展行为的影响规律。
5)  critical safety thickness
临界安全厚度
1.
The critical safety thickness of the top pil.
根据失稳条件确定了顶柱的临界安全厚度。
6)  critical chip thickness
临界切屑厚度
补充资料:临界溶液板厚度
分子式:
CAS号:

性质:含有易裂变物质的溶液在平板形容器或设备中进行贮存或处理时,不论浓度和质量是多少,只要设备中溶液的板厚度小于最小临界值就是临界安全的。235U的最小临界厚度是4.3cm,233U是3.0cm,239pu是3.3cm。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条