说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 失效模式
1)  failure mode
失效模式
1.
Study of failure mode and failure mechanisms on thermal fatigue of plasma sprayed thermal barrier coatings;
等离子涂层热疲劳失效模式及失效机理研究
2.
Typical Failure Modes and Case Analysis of In-service Piping;
压力管道典型的破坏失效模式及实例分析
3.
Analysis of dynamic response and failure mode of boardside beam under impact of missile warhead;
导弹战斗部冲击下舷侧梁的动力响应及失效模式分析
2)  failure modes
失效模式
1.
Discussion on failure modes of valve-regulated lead-acid(VRLA)battery;
VRLA电池失效模式探讨
2.
Discussion on failure modes of VRLAB;
浮充型阀控铅酸蓄电池失效模式探讨
3)  failure model
失效模式
1.
Fuzzy evaluation analysis of the failure models and effects for system reliability;
系统可靠性的失效模式影响模糊评估分析
2.
Analysis on Failure Models of Remanufacturing Cores and Their Products
再制造坯件及产品失效模式分析
3.
Based on the fault tree analysis on the heater tubes by(using) the FTA technology,the paper finds the main factors affecting the failure of the heater tubes,discusses the failure model of the heater tubes,put forward the mathe.
采用FTA技术,对加热炉炉管进行故障树分析,找出影响炉管失效的主要因素,探讨了加热炉炉管的失效模式,提出了失效模式相关的寿命预测数学模型,并对加热炉炉管进行了寿命预测。
4)  failure mechanism
失效模式
1.
In this paper Failure mechanisms of the substrate coating composite are studied through a parametric elastic-plastic finite element analysis, and the influence of the ratio of layer thickness and indenter radius on a failure mechanism is discussed.
考虑不同涂层厚度及在球形压头上纯张力载荷作用,通过参数化弹塑性有限元分析,研究了基体涂层的失效机制,并讨论了涂层厚度与压头半径的比率对涂层的失效模式的影响。
2.
The influence of surface vertical cracks in YSZ coating on the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition (EB-PVD) during thermal cycling was studied.
对电子束物理气相沉积(EB-PVD)双层结构热障涂层在热循环过程中形成的陶瓷层垂直裂纹对涂层失效模式的影响进行了研究。
5)  failure pattern
失效模式
1.
Analysis of failure patterns for large scaled complex products;
大型复杂产品失效模式分析
2.
Based on the problem that cable-stayed bridge has many failure paths,modified β-unzipping method was suggested to seek and identify major failure patterns to structural system reliability.
针对斜拉桥失效路径繁多的问题,采用改进的β约界法限制分枝规模,寻找并识别对结构体系可靠度起主导作用的主要失效模式
6)  6Sigma FMEA
6Sigma失效模式
补充资料:失效模式与影响分析
  失效模式与影响分析简称FMEA(failuremodesandeffectsanalysis),由失效模式(FM)和影响分析(EA)两部分组成.
失效模式(FM)是指能被观察到的错误和缺陷现象,如操作程序不正确,线路接触不良,产品开裂等;影响分析(EA)是指通过分析该失效模式对系统的安全和功能的影响程度,提出可以或可能采取的预防改进措施,以减少过程缺陷,提高过程质量的技术.
简言之,做FM是发现问题;做EA则是分析问题并解决问题.
1.FMEA的特点
FMEA的特点是将失效模式的严重度(SEVSeverity),发生的频度(OCCOccurrence),不易探测度(DETDetection)三个方面进行量化;通过量化,识别潜在的失效模式,确定并优先选定措施,对潜在的失效模式及其影响进行预防,防患于未然.
2.FMEA的分类
根据其用途和适用阶段的不同,FMEA可分为:
(1)设计阶段FMEA(DFMEA----DesignFMEA)
如新产品设计,新工序设计,可预先进行FMEA,尽可能周全地考虑产品规格,工序操作水平,工序能力等因素,使设计符合规定要求.
(2)过程FMEA(PFMEA----ProcessFMEA)
针对工序间可能或已知的主要坏品,可运用PFMEA作量化分析,在影响坏品的诸因素中,哪一个系统原因影响最大是否主要原因其他如Cpk低,生产过程异常等均可通过采用PFMEA直观地找出主要原因,进行改善以达到应用的效果.
(3)设备FMEA(EFMEA----EquipmentFMEA)
如新设备投入运行前,我们可以预先进行EFMEA分析,考虑由于设备可能造成的产品品质问题及可靠性问题等原因,采取预防措施,消除不良因素.
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条