说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 相变温度
1)  phase transition temperature
相变温度
1.
Effect of high-energy ball milling on phase transition temperature of nano-Al_2O_3 powders;
高能振动球磨作用对纳米Al_2O_3相变温度的影响
2.
Based on the electron-lattice interaction,Frohlich Hamiltonian and quantization theory are used to deduce the dimerized energy gap and phase transition temperature of carbon nanotube.
依据碳纳米管中电子-声子相互作用的原理,采用哈密顿量、量子化理论推导了二聚化对应能隙和相变温度,在紧束缚近似、量子理论和能带理论的基础上,利用周期性边界条件对碳纳米管Π电子进行了分析,讨论了碳纳米管的导电性,预测了室温下碳纳米管碳管中载流子输运方向。
3.
With decreasing grain sizes,its crystal structure、ferroelectricity and phase transition temperature all indicated the character of size effect.
随着晶粒尺寸的减小,它的晶体结构、铁电性和相变温度等都表现出尺寸效应。
2)  phase transformation temperature
相变温度
1.
Because of NH4NO3 and α-Al2O3 seed crystal,the nucleation barriers of θ→α reduced,consequently,the phase transformation temperature can be reduced for 40℃ by the effect of NH4NO3;and about 220℃ lower than the normal transformatio.
试验证明,Al(OH)3干凝胶中NH4NO3和α-Al2O3籽晶的存在使θ→α成核势垒降低,从而使得相变温度也降低。
2.
Mean while,the phase transformation temperature about 630℃ of Φ12.
5mmSWRH82B线材在斯太尔摩线上的相变温度在630℃附近。
3.
This paper studies the effects of welding heat,welding press,subsequent heat treatment and cool heat recycles on the phase transformation temperature of the TiNi shape memory alloys welded joints by using differential scanning calorimetry (DSC) and X ray diffraction.
通过示差热分析 (DSC)和X射线衍射等分析手段 ,研究了焊接热量、焊接压力、随机热处理等焊接参数以及焊后热循环对焊接接头相变温度的影响 ,并总结了其影响规律 :焊接热量和焊接压力对焊接接头相变温度的影响较小 ,As 和Af 区间基本保持不变 ;焊后随机热处理对焊接接头相变温度有一定的影响 ,As 和Af 均随热处理时间的增加而提高 ;焊后冷热循环对焊接接头的相变过程和相变温度具有重要的影响 ,因而实施焊后接头热循环工艺过程是必要的。
3)  transformation temperature
相变温度
1.
Effects of multi-pass deformation on microstructure and transformation temperature of S355 steel;
多道次变形对S355钢组织与相变温度的影响
2.
Effect of pre aging on the transformation temperatures of Cu-Al-Ni single crystals;
预时效对CuAlNi单晶相变温度的影响
3.
Effect of thermal cycling on properties of CuZnAl shape memory alloys with different transformation temperatures
热循环对不同相变温度CuZnAl形状记忆合金性能的影响
4)  phase change temperature
相变温度
1.
The text prepared a kind of compound phase change material that can be used for greenhouse production,measured phase change temperature and phase change heat,validated the ability of heat saturation and the heat stability for the material by DSC appearance .
采用共混法制备了一种适合温室生产要求的复合相变材料,用差示扫描量热仪(DSC)测量了相变温度和相变潜热,并验证了复合相变材料的储能能力及材料的热稳定性。
2.
After experimental verification,the model is used to study the influences of ambient temperature,latent heat,phase change temperature span and the efficiency,heat exchange between phase change material and environment on the phase change behavior(in terms of starting time and duration).
利用该模型定量研究了环境温度、相变潜热、相变温度范围和换热效率等多种因素对相变行为的影响,初步得出如下结论:环境温度对相变开始时间和持续时间均有明显影响,随着环境温度的升高,该二时间呈指数形式下降;相变材料的潜热对相变开始时间没有影响,对相变持续时间有明显影响,持续时间随潜热线性增加;相变温度范围对相变开始时间也没有影响,而相变持续时间随相变温度范围的增加平缓地增加;相变材料与环境之间的换热效率显著影响相变过程开始和持续的时间,二者随换热效率的提高呈指数形式下降。
3.
Then the latent heat and phase change temperature are derived.
文中分别对部分离体生物组织如猪瘦肉、猪肝、猪肥肉及牛肉的相变温度、相变潜热进行了DSC测试,获得了相变潜热及相变温度区间。
5)  transition temperature
相变温度
1.
The stability of perovskite structure, cell parameters and phase transition temperature of sintered B2O3-doped Ba1-xSrxTiO3(x = 0 ~1) ceramics were investigated.
4、1)陶瓷钙钛矿结构的稳定性、晶胞参数以及相变温度
2.
The change of the transition temperature with composition is in the form of "U" curve and the possible cause may be existing of paraelectric phase Ba(Mg1/3Nb2/3)O3 in PMN-BT ceramics.
制备了一系列PMN-BT陶瓷,系统地研究了BT含量的变化对介电性能和相变温度的影响。
3.
A concise method of evaluating unitedly the transition temperature of the d-dimensional Ising model (d=1,2,3) has been presented.
作者提出了一种统一计算d 维伊辛模型 (d =1,2 ,3)中相变温度的方法 。
6)  phase transition temperature
相转变温度
1.
The continuous or semi-batch PNIPAM microgels have narrower phase transition temperature range than batch PNIPAM microgels,among which continuous PNIPAM microgels have the narrowest one.
连续式或半间歇式SFEP法合成的PNIPAM微凝胶相转变温度范围明显地比间歇式SFEP法合成的窄,其中又以连续式SFEP法的效果最明显。
2.
The phase transition temperature of the supermolecular liquid crystalline compound is different from the proton donor.
结果表明:合成了目标化合物;IR结果证明了羧基和吡啶环间分子间氢键代替了羧基间的分子间氢键;相态及液晶行为研究证明了氢键复合物具有典型的热致液晶性能且呈现明显的向列型液晶态,超分子液晶复合物的相转变温度低于质子供体的相转变温度,且其液晶相范围宽于质子供体,说明分子间氢键起到了稳定液晶相态的作用。
补充资料:二级相变
分子式:
CAS号:

性质:大多是发生在极低温度时的相变。例如,在居里点铁磁体转变为顺磁体,在零磁场下超导体转变为正常导体,液态氦Ⅱ与液态氦Ⅰ之间的λ相变等。二级相变的特点是,两相的化学势和化学势的一级偏微商相等,但化学势的二级偏微商不相等。因此在相变时没有体积变化和潜热(即相变热)。在相变点,两相的体积、焓和熵的变化是连续的。故这种相变也称为连续相变(continuous phase transition)。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条