1) amorphous alloy
非晶态合金
1.
Preparation and application in welding of bulk Mg_(65)Cu_(22)Ni_3Y_(10) amorphous alloys;
块体Mg_(65)Cu_(22)Ni_3Y_(10)非晶态合金的制备及在焊接中的应用
2.
Formation and crystallized behavior of Mg_(65)Cu_(25)Y_(10) amorphous alloy;
Mg_(65)Cu_(25)Y_(10)非晶态合金的形成及其晶化行为
3.
Study for hydrogenation of furfuryl alcohol to tetrafurfural alcohol on NiB/SiO_2 amorphous alloy catalyst;
NiB/SiO_2非晶态合金催化剂用于糠醇加氢制四氢糠醇的研究
2) amorphous alloys
非晶态合金
1.
The applications of amorphous alloys uesed in low-temperature fuel cells;
非晶态合金催化剂在低温燃料电池中的应用
2.
The influence of anisotropic fields on stress-impedance effect in amorphous alloys;
各向异性场对非晶态合金应力阻抗效应的影响
3.
A method for predicting the crystallization temperature and crystallization driving force of ternary amorphous alloys was provided.
通过对Buschow提出的预测二元非晶态合金晶化温度的"最小空位"模型进行扩展,并进一步结合Miedema理论得到了一种预测三元非晶态合金晶化温度和晶化驱动力的理论方法。
3) NiB/SiO2 amorphous alloy
NiB/SiO2非晶态合金
1.
2,2-Dimethyl-3-(3-methylphenyl)-propan-1-ol was synthesized using NiB/SiO2 amorphous alloy as catalyst and 2,2-dimethyl-3-(3-methylphenyl)propionaldehyde as starting materials through hydrogenation.
以NiB/SiO2非晶态合金为催化剂,2,2-二甲基-3-(3-甲基苯基)丙醛(甲基铃兰醛)为原料,催化加氢合成了2,2-二甲基-3-(3-甲基苯基)丙醇(甲基铃兰醇)。
4) Al-based amorphous alloy
铝基非晶态合金
1.
Al-based amorphous alloys and nano-Al enhanced amorphous composites have attracted much attention due to a combination of high specific strength, good ductility, corrosion resistance and reasonably low price.
铝基非晶态合金及其非晶复合材料具有高强、高韧、轻质、廉价、耐蚀等特点,具有广阔的应用前景。
2.
Al_(85)Ni_5Y_8Co_2 has the highest glass forming ability in Al-based amorphous alloys to date.
系统研究了铝基非晶态合金AI-Co-Y体系中富AI区的非晶形成能力形成非晶结构最佳成分为Al_(88)Co_5Y_7,条带临界厚度为230μm。
5) Ni-B amorphous alloy
Ni-B非晶态合金
1.
Comparative study on the catalytic performance of the Ni-B amorphous alloy and raney Ni during the liquid phase acetonitrile selective hydrogenation;
乙腈液相选择性加氢中Ni-B非晶态合金和Raney Ni催化性能的比较
2.
The nearly monodispersed Ni-B amorphous alloy nanoclusters were prepared through the reduced reaction of Ni(Ac)_2 by KBH_4 in W/O.
采用W/O型微乳液法,用KBH4还原Ni(Ac)2制备Ni-B非晶态合金团簇。
3.
Electrocatalytic oxidation of methanol at the nano Ni-B amorphous alloy powder-microelectrode in alkaline media was studied by using cyclic voltammetry.
应用循环伏安法研究了碱性介质中Ni-B非晶态合金纳米粉末微电极上甲醇的电催化氧化。
6) Amorphous Co-B alloy
非晶态Co-B合金
1.
Promotion Effect of Zn on Amorphous Co-B alloy and Their Catalytic Performance for Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol;
锌对非晶态Co-B合金的改性及催化肉桂醛加氢为肉桂醇的研究
2.
The amorphous Co-B alloy nanoparticles can be prepared very easily by the solid-solid reaction of the CoCl_26H_2O and KBH_4 powders at room temperature.
6H2O和KBH4室温固-固相反应,制备了非晶态Co-B合金纳米颗粒,用等离子体发射光谱、X射线衍射、透射电镜、电子衍射进行了表征,结果表明产物主要是由平均粒径为15~25nm的非晶态Co-B合金组成。
3.
Amorphous Co-B alloy catalysts were prepared by chemical reduction with KBH4 in aqueous solution, and modified amorphous Co-B alloy catalyst by introducing the third metal component were prepared by chemical reduction of mixed CoCl_2 and MCl_n (M: introduced metal) with KBH4 in aqueous solution.
采用KBH_4还原法制备非晶态Co-B合金催化剂和共还原法制备了第三金属组分改性的三元非晶态Co-B合金催化剂，考察了不同的B／Co比和掺杂Fe、Cu、La、Ce、Mo、Ni和Zn对非晶态Co-B催化剂肉桂醛加氢性能的影响，并用XRD、DSC、TPR、H_2-TPD和XPS手段对催化剂进行了表征。
补充资料：非晶态合金
分子式：
CAS号：
性质：一种没有原子三维周期性排列的金属或合金固体。它在超过几个原子间距范围以外，不具有长程有序的晶体点阵排列。和普通晶态金属与合金相比，非晶态金属与合金具有较高的强度、良好的磁学性能和抗腐蚀性能等，通常又称之为金属玻璃或玻璃态合金。可部分替代硅钢、玻莫合金和铁氧体等软磁材料，且综合性能高于这些材料。
CAS号：
性质：一种没有原子三维周期性排列的金属或合金固体。它在超过几个原子间距范围以外，不具有长程有序的晶体点阵排列。和普通晶态金属与合金相比，非晶态金属与合金具有较高的强度、良好的磁学性能和抗腐蚀性能等，通常又称之为金属玻璃或玻璃态合金。可部分替代硅钢、玻莫合金和铁氧体等软磁材料，且综合性能高于这些材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条