说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 多孔TiAl金属间化合物
1)  porous TiAl intermetallic
多孔TiAl金属间化合物
1.
Brazing porous TiAl intermetallic to 434L stainless steel;
多孔TiAl金属间化合物和434L不锈钢的钎焊连接
2.
This dissertation reports an investigation of bonding porous TiAl intermetallic with SS (stainless steel) used as common structure components.
多孔TiAl金属间化合物是一种潜在的第三类无机多孔材料。
2)  porousγ-TiAl intermetallic material
多孔γ-TiAl金属间化合物材料
3)  TiAl intermetallics
TiAl金属间化合物
1.
Directional solidification and lamellar orientation control of TiAl intermetallics;
TiAl金属间化合物的定向凝固和晶向控制
2.
However,before practical application,the poor high-temperature oxidation resistance and wear resistance of TiAl intermetallics must be solved.
本文综述了TiAl金属间化合物抗高温氧化和耐磨的表面技术最新进
3.
In recent years,considerable interest has developed in TiAl intermetallics because of unique properties such as low density,good stiffness,high elevated temperature strength,and excellent oxidation resistance.
近年来 ,TiAl金属间化合物由于其密度小、硬度大、耐高温、具有优良的抗氧化能力等独特的性能 ,因此越来越引起广泛的关注并得到了迅猛的发展。
4)  TiAl intermetallic
TiAl金属间化合物
1.
The properties such as fragility in room-temperature and oxidation in high-temperature of TiAl intermetallic were introduced in this paper.
介绍了TiAl金属间化合物的室温脆性及高温氧化性,从复相组织化和复合材料化两方面分析了TiAl金属间化合物的强韧化,同时从元素合金化和表面改性两方面分析了其高温氧化性能的改善,进而对未来的研究提出了一些建议。
2.
Using spark plasma sintering technique TiAl intermetallic powers was prepared and XRD was used to identify the phases of products.
采用放电等离子技术低温快速热爆合成TiAl金属间化合物粉末,利用X射线衍射对合成粉末进行物相鉴定,并研究了合成温度以及保温时间对TiAl化合物粉末合成的影响。
5)  intermetallic compound TiAl
金属间化合物TiAl
6)  TiAl intermetallic compound
TiAl金属间化合物
1.
The S/N experimental design has optimized the friction welding parameters of TiAl intermetallic compound to NiCr20TiAl.
采用SN比设计方法优化了TiAl金属间化合物与NiCr20TiAl摩擦焊接的工艺规范,分析了接头组织变化规律,研究了TiAl金属间化合物摩擦焊接成形控制特点。
2.
TiAl intermetallic compound and HA powders were obtained by the method of mechanical alloying(MA) and chemical deposition respectively.
首先采用机械合金化的方法制备出TiAl金属间化合物,用化学沉淀法制备出HA粉体,然后将二者球磨混合,经过真空热压烧结工艺制得TiAl/HA复合材料。
3.
First-principle calculations were performed to study the effect of Nb on the bonding characteris-tics of TiAl intermetallic compounds with the emphasis on the electronic interactions between Ti (Al) and O atoms.
采用第一原理方法,研究了Nb元素对TiAl金属间化合物电子结构及其对Ti,Al和O原子键合作用的影响。
补充资料:耐蚀金属间化合物
分子式:
CAS号:

性质:抗溶液腐蚀的金属间化合物。Fe3Si在腐蚀溶液中可形成SiO2钝化膜,因而在不同浓度的硫酸溶液中耐蚀性与0Cr13相当,优于1Cr13。Ni3Al在50%硫酸或者50%磷酸溶液中的耐蚀性良好。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条