说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 城市污水处理厂
1)  municipal wastewater treatment plant
城市污水处理厂
1.
Policy analysis for sludge treatment and disposal in municipal wastewater treatment plant;
城市污水处理厂污泥处理处置的政策分析
2.
Economical criterion of urban municipal wastewater treatment plant's layout optimization
城市污水处理厂布局优化的经济性判据
3.
Combining with sludge reduction,stabilization and change for harmlessness and usefulness,this paper summarized the main theory and techniques of sludge treatment and disposal in municipal wastewater treatment plant at present.
结合污泥的减量化、稳定化、无害化和资源化,综述了目前国内外城市污水处理厂污泥处理处置技术的主要理论和方法。
2)  municipal sewage treatment plant
城市污水处理厂
1.
It is hoped to provide basis for the future research and process design of odor control in other municipal sewage treatment plant.
本文介绍了其工作原理、工艺特点、影响因素以及国内外应用现状及其局限性,希望对于我国其它城市污水处理厂除臭系统的建设起到借鉴作用。
2.
Based on the effect of odor from the municipal sewage treatment plant on the surroundings, brings forward the concept of the acceptance of atmosphere quality.
针对城市污水处理厂的臭气对周围区域的影响问题,提出了大气质量可接受性的概念,分析比较了臭气的检测技术,认为采取水气分离、将臭气源密封、保持负压、集中处理、高空排放的办法切实可行;同时建议制定臭气控制政策并应综合考虑不同因素。
3.
Aimed at the problems rising from the municipal sewage treatment plant on the environment pollutions and the increasing residents complaints and the damage to worker health,analyses the forming mechanism of odor in sewage processing together with the close correlation of odor forming and sewage treatment process,from which brings forward the concept of odor process control.
针对城市污水处理厂恶臭气体所造成的环境污染、居民抱怨以及对职工健康造成损害等一系列问题,分析了城市污水处理厂恶臭气体的形成机理及恶臭气体与处理工艺过程的紧密相关性,并在此基础上提出了全过程控制的理念;同时为将国内停留在实验室研究阶段提升到工程应用程度,文中辅以实例对现场试验研究进行了概述。
3)  urban sewage treatment plant
城市污水处理厂
1.
Comprehensive Evaluation Model of Urban Sewage Treatment Plant;
城市污水处理厂综合评价模型的研究
2.
Research on energy optimizing mathematical model of urban sewage treatment plant
城市污水处理厂能耗优化的数学模型建立
3.
The selection of process programs is one of the most important steps in the construction of the urban sewage treatment plant, it plays a determinant role in the investment cost running cost effluent effect operation and management of the urban sewage treatment plant.
工艺方案选择是城市污水处理厂建设中最重要的步骤之一,它对城市污水处理厂的投资费用、运行费用、出水效果、操作管理等起着决定性作用。
4)  urban wastewater treatment plant
城市污水处理厂
1.
Comparative study on resource allocation efficiency of urban wastewater treatment plants in China.;
中国城市污水处理厂资源配置效率的比较
2.
On the principle of non-dispersible infrared absorption (NDIR) method for determination of total organic carbon (TOC), the TOC-5000A analyzer (solid sample burning device SSM-5000A is appended) was used to determine TOC content in dewatered sludge of urban wastewater treatment plant.
依据燃烧氧化—非色散红外吸收法(NDIR)测定总有机碳(TOC)的原理,采用岛津TOC-5000A总有机碳分析仪(附固体样品燃烧装置SSM-5000A)测定了城市污水处理厂脱水污泥中的TOC含量。
3.
The present status of Chinese urban wastewater treatment plants are introduced in detail as well the existing problems.
通过对我国城市污水处理厂发展概况的介绍和当前我国城市污水处理厂的现状分析,指出了存在的问题,并提出了相应的对策和措施,为我国城市污水处理相关研究提供基础和借鉴。
5)  sewage treatment plant
城市污水处理厂
1.
Investigation on the estrogenicity of different processes in a sewage treatment plant
城市污水处理厂各工艺阶段内分泌干扰物活性变化规律研究
2.
The sources,sorts,concentration,production and harm of odor dissolved in water and in the state of air phase coming from sewage treatment plant are introduced.
介绍城市污水处理厂恶臭污染来源、发生条件及危害。
3.
The optimal comprehensive benefit is the objective of sewage treatment plant processes optimizing design.
城市污水处理厂工艺设计优化是以综合效益最优为其设计的目标。
6)  sewage sludge
城市污水处理厂污泥
1.
New technology for solidifying sewage sludge;
城市污水处理厂污泥固化处理技术研究
补充资料:城市污水处理
      城市污水包括生活污水、工业废水和径流污水等,由城市排水管网汇集并输送到污水处理厂进行处理。
  
  城市污水的污染,一般经历三个历史时期:病源污染期、总体污染期和新污染期。在病源污染期,城市污水主要是生活污水。由于污水中含有病菌和病毒,污水排入水体后往往会传染疾病。在总体污染期,随着工业的发展和人口的集中,城市污水量及所含的污染物种类不断增加。污水排入水体后,造成水体中悬浮物数量和生化需氧量越来越高,水体缺氧,水生生物灭绝。在新污染期,由于工业的高度发展,污水所含的污染物种类更加复杂。工业废水已日益成为城市污水处理中的主要对象。
  
  工业废水包括生产污水和冷却水。这两种废水性质截然不同。冷却水要由工厂回收循环使用,一般不应排入城市排水管网。生产污水首先应由工厂综合利用,尽量减少排出量。生产污水中含有损害管道、妨碍城市污水处理工艺以及影响处理后的污水和污泥利用的污染物,工厂应进行预处理,水质达到排放标准后再排入城市排水管网。
  
  城市排水管网  一般可分三种:①分流制──在城市中设两套独立的排水管网,分别排泄污水和径流雨水。②合流制──在城市中设一套排水管网排泄污水和径流雨水。③半分流制──在城市中设一套排水管网,同时沿河湖设污水截流干管,平时接纳污水,下雨时,通过截流干管上的溢流装置,把过量的径流雨水泄入水体。
  
  为了便于污水的处理和利用,原有一些老城市的合流制排水管网纷纷改建为分流制或半分流制。新城市一般采用分流制,为节约建设费用,在非繁华区,可采用明渠排泄雨水。
  
  处理工艺  城市污水的处理涉及很多方面。必须对下水道体制,污水处理厂的位置和处理工艺、处理后的污水的利用等等,进行综合规划。
  
  城市污水处理工艺,应因地制宜采用多种形式,要根据城市污水的利用或排放去向同时考虑水体的自然净化以及污水在利用过程中的净化作用,确定废水的处理程度及相应的处理工艺。处理后的污水,无论用于工业、农业或回灌地下,均须符合国家颁发的有关水质标准和法令。在缺水地区,应把污水当作资源利用。
   ?〕鞘形鬯矸治黾侗穑莆?污水一级处理、污水二级处理、污水三级处理。一级处理应用物理处理方法,即用格栅、沉砂池、沉淀池等构筑物,去除污水中不溶解的污染物和寄生虫卵。二级处理应用生物处理方法,即主要通过微生物的代谢作用进行物质转化的过程,将污水中各种复杂的有机物氧化降解为简单的物质。生物处理对污水水质、水温、供氧量、pH值等都有一定的要求。三级处理是用生物化学 (硝化-反硝化)法、碱化吹脱法或离子交换法除氮,用化学沉淀法除磷,用臭氧氧化法、活性炭法或超过滤法去除难降解有机物,用反渗透法去除盐类,用氯化法消毒等单元过程的一种或几种组成的污水处理工艺。
  
  工业发达国家的城市污水处理开始较早,一般以一级处理为预处理,二级处理为主体,三级处理很少使用。这些国家都在努力普及二级处理,污水处理厂的规模越建越大,正向工艺操作自动化方向发展。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条