1) high temperature resistance
耐高温
1.
Advances in high temperature resistance organic adhesives;
耐高温有机胶粘剂研究进展
2.
Sticking technology of high temperature resistance fluoro-aether rubber;
耐高温氟醚橡胶粘接工艺研究
3.
Study on high temperature resistance adhesive for room temperature curing;
室温固化耐高温胶粘剂的研究
2) high temperature resistant
耐高温
1.
The research and development of monofilaments for high temperature resistant filter medium;
耐高温滤用单丝的研究进展
2.
Study on an advanced high temperature resistant coating with nano-filler;
新型耐高温纳米防护涂料研究
3.
It also gives a discussion about the mechanism, technical proposal and development of a high temperature resistant optical fiber used in well logging.
介绍了国外光纤测井技术的发展概况,对测井光纤光缆的环境性能要求,论述了测井用耐高温光纤的机理,耐高温光纤的技术方案以及国外开发耐高温光纤的情况。
3) high-temperature resistance
耐高温
1.
Development of research on high-temperature resistance thermosetting resin adhesives;
耐高温热固性树脂胶粘剂的研究动态
2.
Study on room cured high-temperature resistance WD3102 epoxy adhesives;
WD3102室温固化耐高温胶粘剂的研制
3.
To measure the formation parameters in the high-deep and high-temperature oilwells and improve the high-temperature resistance performances of logging tools,the paper analyses the technologies of isolating heat and absorbing heat to increase the logging tools' high-temperature resistance performances.
为实现大深度井、高温井的地层参数测量,提高测井仪器的耐高温性能,研究了隔热、吸热技术在提高石油测井仪器的耐高温性能方面的作用。
4) heat-resistance
耐高温
1.
In this paper, the research progress in the breeding of heat-resistance ethanol yeast by high temperature domestication, cross-bred breeding, mutation breeding, protoplast infusion and ge.
本文总结了应用高温驯化、杂交育种、诱变育种、原生质体融合和基因工程等技术选育耐高温酵母的进展,并重点介绍了离子束生物工程技术的原理及其在选育耐高温酵母应用中的优势。
2.
The effects of pigments and fillers,silane coupling agent and curing agent on the heat-resistance performance of the coating were studied.
研究了颜填料的用量及配比、偶联剂和固化剂及其用量等因素对环氧改性有机硅涂料耐温性能的影响,确定了耐温达650℃的耐高温涂料最佳配方。
5) heat-resistant
['hi:tri,zistənt]
耐高温
1.
Screening of fungi producing heat-resistant lassase;
一株产耐高温漆酶真菌的筛选
2.
Study on Heat-resistant Polymers Containing Aryl-s-triazine Moieties
含芳基均三嗪环耐高温聚合物的研究
3.
Study on heat-resistant PbO coating with low emissivity in 3～5 μm waveband
3～5μm波段低发射率耐高温PbO涂层的研究
6) high-temperature resistance
耐高温性
1.
In order to improve the high-temperature resistance of bismuth vanadate yellow pigment,it was coated with SiO2 through hydrolysis reaction of tetraethoxysilane(TEOS).
为了提高钒酸铋(BiVO4)黄色颜料的耐高温性,利用正硅酸乙酯(TEOS)的水解反应,在BiVO4表面形成SiO2膜,使钒酸铋黄色颜料经过1 000℃的高温煅烧,依然颜色鲜艳。
2.
The evaluation methods of adhesion,compactness and high-temperature resistance of unsaturated polyester putty are discussed.
讨论了原子灰附着性、致密性、耐高温性的评价方法;介绍了原子灰的正确选择和施工应用。
3.
The high-temperature resistance of a phenolic molding compound based on a phenolic resin reinforced with glass fiber was studied.
采用一种自制的苯酚甲醛树脂和复合固化体系 ,以无机玻璃纤维为增强材料 ,得到一种可注射成型的酚醛模塑料 ,对其耐高温性能进行了研究。
补充资料：耐高温固体推进剂
分子式：
CAS号：
性质：是一种在较长时间的高温环境（例如135℃下300h以上）中性能不发生显著变化仍能正常工作的复合推进剂。黏合剂为丁羟胶或氟碳橡胶，氧化剂多为耐热炸药（如黑索金、硝基胍等）或经处理后能耐热的高氯酸铵，不含增塑剂。主要应用于空间工作和深井工作发动机。
CAS号：
性质：是一种在较长时间的高温环境（例如135℃下300h以上）中性能不发生显著变化仍能正常工作的复合推进剂。黏合剂为丁羟胶或氟碳橡胶，氧化剂多为耐热炸药（如黑索金、硝基胍等）或经处理后能耐热的高氯酸铵，不含增塑剂。主要应用于空间工作和深井工作发动机。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条