1) press fit load
压装力
1.
The knurling connection mechanism of the hollow assembled camshaft was presented,the FEM numerical simulation was used to analyze the factors influencing the knurling connection press fit load and the press fit tests of knurling connection was performed.
介绍了中空装配式凸轮轴的滚花连接机理,采用有限元数值模拟分析了滚花连接压装力的影响因素,并进行了凸轮和轴体的压装试验。
2.
The factors affecting the press fit load and the connection strength were numerically simulated.
介绍了中空装配式凸轮轴的技术优势以及滚花连接的连接机理,采用数值模拟的方法分析了影响滚花连接压装力和连接强度的各种因素,并进行了滚花连接压装试验。
3.
The factors influencing on press fit load in assembly were analyzed by the FEM numerical simulation,and the press fit load,static torque and fatigue torsional strength were experimentally verified.
本文阐述了装配式凸轮轴的技术优势,介绍了装配式凸轮轴的滚花连接机理,采用数值模拟的方法对影响滚花连接压装力的各种因素进行了分析,并完成滚花连接压装实验、静扭强度和疲劳强度试验。
2) push force
压装力
1.
By analyzing the push force to pinion gear bearing, the impact of the push force to bearing on the preload of pinion assembly of truck is confirmed.
通过对主锥轴承进行力学分析,确定了轴承压装力对主锥预紧力影响,利用统计过程控制(SPC)对轴承压装力进行监控,从而将轴承压装力波动控制在合适的范围内,有效地提高了主锥的装配质量。
2.
With the new control method, it is now much easier to control the push force, handle the data, and print the report form than the traditional manual control method.
运用工控机控制 ,克服了以往传统手动控制压装方法压装力难以控制 ,压装数据难以储存 ,压装数据难以进一步处理 ,难以打印报表等缺点 ,提高了压装效
3) garment pressure
服装压力
1.
Relationship between garment pressure and human body comfortableness;
服装压力与人体舒适性之关系
4) clothing pressure
服装压力
1.
Combined high-performance enlarged circuit with compensation circuit,the circuit is designed to test clothing pressure.
文章介绍了压阻式传感器的工作原理及其优越性能,结合高性能的放大及补偿电路进行了服装压力测试的电路设计。
2.
A new kind of test system which used Flexiforce sensor of American Tekscan company to test clothing pressure was introduced by comparing with the traditional test ways of clothing pressure in the paper.
文章通过与传统服装压力测试方法的对比,介绍了一种新型的利用美国Tekscan公司研制的Flexiforce传感器来测量服装压力的测试系统。
3.
The objective measurement and characterization of clothing pressure are essential to the study of pressure comfort.
服装压力舒适性是服装舒适性研究中的重要组成部分,而服装压力的客观测量与表征是压力舒适性研究的基础。
5) assembling pressure
装配压力
1.
Design and application of assembling pressure
阀控式铅酸蓄电池装配压力的设计和应用
2.
The factors (such as grid alloy, AGM separator, the design of the thickness of battery plate, the assembling pressure, the charging regime and the discharging current) of affecting deep cycle life of valve regulated lead acid VRLA battery were discussed.
研究了影响VRLA电池深循环寿命的一些因素 (如电池的板栅合金 ,AGM隔板 ,电池极板厚度 ,装配压力 ,充电模式等 ) ,并简要阐述了同批电池同一放电制度以不同的充电模式作深循环寿命对比试验的结果。
6) press fitting
压力装配
1.
The effects of time,temperature and welding line on press fitting should be comprehensively considered to ensure certain transmitted torque to an assembling part.
应全面考虑时间、温度和注塑件上熔合缝对压力装配的影响 ,确保塑料连接件能传递一定的扭矩。
补充资料：枲装
1.谓用枲麻填装。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条