1) desulfuration mechanism
固硫机理
1.
The desulfuration mechanism of black liquor coal slurry was investigated by means of energy spectroscopy,electron probe microanalyzer and X-ray diffrac.
为了解黑液水煤浆自身固硫特性及机理,采用热天平、试验炉和工业炉燃烧运行实验,定性定量比较了黑液浆与制浆原煤燃烧烟气SO2排放特性,并通过对炉内典型燃烧灰样的能谱、电子探针和X射线衍射分析,对黑液浆燃烧固硫机理进行了深入研究。
2.
92% to research the desulfuration characteristics of calcium-based sulphur-fixing agent and decomposing-rate of desulphur object CaSO4 systemically under different conditions, and analyzed its desulfuration mechanism.
92％的国家标准煤样,在不同条件下系统的研究了钙基固硫剂的固硫特性和固硫产物CaSO4的分解率;并分析了其固硫机理。
3.
The paper introduced the sorts of sulfur-fixing agent and desulfuration mechanism.
本文介绍了固硫剂的种类及固硫机理,指出了传统钙基固硫剂固硫效果差的原因,提出了研究复合固硫剂的必要性,并且分析了该领域中存在的问题及发展趋势。
2) sulfur retention mechanism
固硫机理
1.
On the basis of analyzing the sulfur retention mechanism of the biomass compound type of coal developed by the authors an experimental study was conducted of the sulfur retention characteristics of this type of coal.
对所研制的生物质复合型煤的固硫机理进行了分析 ,并对生物质复合型煤的固硫特性进行了试验研究 ,结果表明生物质复合型煤较一般型煤有更高的固硫率 ,当Ca/S=2 0、燃烧温度低于 90 0℃时 ,生物质复合型煤的固硫率可以达到 90 %以上 ;生物质复合型煤的固硫率受燃烧温度、生物质添加量、钙硫比等因素影响 ,加入铁系氧化物能增强生物质复合型煤的固硫性能。
3) solid-liquid-solid mechanism
固-液-固机理
4) desulfurization mechanism
脱硫机理
1.
The desulfurization mechanism of iron-manganese compound oxide desulfurizer for removal of COS from coal gas;
铁锰系脱硫剂对煤气中羰基硫的脱硫机理初探
2.
Preparation of adsorbent made from surplus sludge and its desulfurization mechanism;
剩余污泥制备吸附剂及其脱硫机理
3.
Molecular simulation in studies on desulfurization mechanism;
分子模拟在脱硫机理研究中的应用
5) vulcanization mechanism
硫化机理
1.
The curing characteristics and vulcanization mechanism of powdered NR filled by dysprosium-modified carbon black;
稀土镝掺杂炭黑填充型粉末NR的硫化特性和硫化机理研究
2.
The basic material,additive and promoter,catalyst,vulcanization mechanism,and application of the addition type liquid silicone rubber were summarized in this paper.
本文概述了加成型液体硅橡胶的基础原料、助剂、添加剂、催化剂、硫化机理及应用,综述了近年来开发的几种新型加成型液体硅橡胶及其应用。
3.
The vulcanization mechanism,composition,application of addition type liquid silicone rubber are reviewed.
介绍了加成型液体硅橡胶的硫化机理、组成及应
补充资料：5-硫基-3-苯基-2-硫-1,3,4-硫代二唑,钾盐
CAS: 17654-88-5
分子式: C8H6N2S3
中文名称: 铋试剂II；3-苯基-1,3,4-噻二唑亚基-2,5-二硫酮；5-硫基-3-苯基-2-硫-1,3,4-硫代二唑,钾盐；铋试剂 II
英文名称: BismuthiolII；5-Mercapto-3-phenyl-2-thio-1,3,4-thiodiazole, potassium salt；4-thiadiazole-2-thione, 5-mercapto-3-phenyl-2h-3；4-thiadiazolidine-2,5-dithione, 3-phenyl-3；3-phenylbismuthol；5-mercapto-3-phenyl-2h-1,3,4-thiadiazole-2-thione；3,4-Thiadiazolidine-2,5-dithione, 3-phenyl-1
分子式: C8H6N2S3
中文名称: 铋试剂II；3-苯基-1,3,4-噻二唑亚基-2,5-二硫酮；5-硫基-3-苯基-2-硫-1,3,4-硫代二唑,钾盐；铋试剂 II
英文名称: BismuthiolII；5-Mercapto-3-phenyl-2-thio-1,3,4-thiodiazole, potassium salt；4-thiadiazole-2-thione, 5-mercapto-3-phenyl-2h-3；4-thiadiazolidine-2,5-dithione, 3-phenyl-3；3-phenylbismuthol；5-mercapto-3-phenyl-2h-1,3,4-thiadiazole-2-thione；3,4-Thiadiazolidine-2,5-dithione, 3-phenyl-1
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条