1) multi-pass
多道次
1.
Research on the multi-pass shear spinning technology of small-angle conical workpieces;
小锥角零件多道次剪旋成形试验研究
2.
Design of the involute trace of multi-pass conventional spinning and application in numerical simulation;
多道次普通旋压渐开线轨迹设计及其在数值模拟中的应用
3.
Numerical simulation of multi-pass roll forming process of anode plate
阳极板多道次辊弯成形过程数值模拟
2) multiple passes
多道次
1.
Finite element simulation of multiple passes equal channel angular pressing process;
等通道转角多道次挤压有限元模拟
2.
The simulation of roll forming with multiple passes was studied by FEM software ABAQUS.
利用ABAQUS软件对多道次辊弯成形数值模拟技术进行了研究。
3) Multistage
[英]['mʌltisteidʒ] [美]['mʌltɪ,stedʒ]
多道次
1.
Research on the Multistage Incremental Forming of Tube-like Part;
直壁筒形件多道次增量成形工艺研究
4) multi-pass spinning
多道次旋压
1.
Wall thickness variation during multi-pass spinning of large complicated shell;
大型复杂薄壁壳体多道次旋压过程中的壁厚变化
2.
Because of the limitation of material forming limit and other factors, it is necessary to produce this kind of parts by multi-pass spinning technology.
由于受到材料成形极限等因素的限制,成形此类回转体零件往往需要采用多道次旋压工艺。
5) multi-step forming
多道次成形
1.
The simulation results show that the multi-step forming can optimize the deformation path of sheet metal,make the deformation more uniformly,effectively restrain wrinkles and improve the deformation capacity of sheet metal.
通过对球形面多道次成形的有限元数值模拟,分析了多道次成形数值模拟的关键技术,研究了多道次成形的特点及规律,阐述了成形过程中易产生的缺陷和需解决的关键问题。
2.
Both multi-point press forming(MPPF) and multi-step multi-point die forming(MPDF) make the full use of multi-step forming(MPF).
在同样条件下,多点压机方式好于多道次成形,但当多道次成形道次逐渐增多时,成形质量接近于多点压机成形。
6) multi-pass deformation
多道次变形
1.
Evolution of microstructures in V-microalloyed mild steel during multi-pass deformation;
钒微合金化低碳钢多道次变形过程中的组织演变
补充资料:道-道间寻道时间
道-道间寻道时间(single track seek):
指磁头从一磁道移动至另一磁道的时间,单位为毫秒(ms)。
指磁头从一磁道移动至另一磁道的时间,单位为毫秒(ms)。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条