说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 除尘系统
1)  dedusting system
除尘系统
1.
Discussing the energy conservation in the dedusting system;
浅谈除尘系统的节能问题
2.
Application analysis of various kinds of adjusting valves for dedusting system;
除尘系统中各类调节阀的运用分析
3.
Comprehensive improvement on dedusting system for 40 t EAF at Guanggang;
广钢40t电炉除尘系统的综合改进
2)  dust removal system
除尘系统
1.
Effect of cooling on-machine on dust removal system;
机上冷却烧结机对机尾除尘系统的影响
2.
For flax textile enterprises,correctly selecting of dust extracting equipment and rational division of dust removal system is very important in taking measures of safety,fire prevention and explosion protection in the production.
正确选择除尘设备,合理划分除尘系统,以辅助防火、防爆安全措施,这对于亚麻纺织企业的生产是十分重要的。
3.
Combining with the existing designs and constructions of dust removal system in coal terminals,this paper gives a comprehensive comparison to the efficiency and adaptability of dust catchers,presents suitable types of dust catchers,and conducts a simple calculation for dust removal system.
结合现有煤港除尘的工程设计和施工,对输煤系统中除尘器的效率和适用性综合比较,给出适合处理煤尘的除尘器类型,并结合实际工程对除尘系统进行简单计算。
3)  dust collecting system
除尘系统
1.
Simatic PCS7 controller for low-pressure pulse bag dust collecting system at SISG No.5 BF;
SIMATIC PCS7在低压脉冲布袋除尘系统中的应用
2.
The plan design of smoke dust collecting system in hot strip finishing rolling in Hot Strip Workshop of No.
介绍了宣钢第一轧钢厂热带车间热带精轧过程中烟气除尘系统的方案设计。
3.
In this paper,the adjusting methods of dust collecting system are introduced.
介绍了铸造车间除尘系统的调试方法 ,通过观察风机电机电流的变化情况来监测除尘系统风量、风压的方法以及当除尘系统压力失衡时应采取的措
4)  dusting system
除尘系统
1.
Questions about reform on the dusting system of machining;
关于机加除尘系统的改造问题
2.
At present,there are some shortcomings in the dusting system applied to the DTH drill,adopting cyclone and filter dusting system ,the dust pollute is reduced,the effect of environment protect is better.
潜孔钻机除尘系统对于延长钻机使用寿命,保证作业人员的身体健康至关重要。
3.
This paper discusses the questions about dusting system constitute project and working principle and peculiarity in the design of machine for clearing coal_dust.
对煤尘清扫机设计中有关除尘系统构成的方案、工作原理及特性等问题进行了探讨。
5)  dust removing system
除尘系统
1.
Calculation for regulating fan speed in variable condition dust removing systems;
变工况除尘系统风机调速计算方法
2.
Among some steel enterprises of our country,the dust removing system have been on operation for many years, there must be some problems more or less, and it affects production and environment nearby.
在国有大中型钢铁企业中,炼铁厂的除尘系统大部分都是运行了多年的系统,或多或少都存在一些问题,影响环境与生产。
6)  dust scrubbing water system of converter
转炉除尘水系统
补充资料:安全系统能否与控制系统结合的争论
但是通过采用现代化的、高集成度的处理技术,采用防火墙和主动诊断技术,在共同的环境中功能性地把控制和安全系统分开是完全可以保证安全的,也能够满足国际安全标准的要求。

  一些供应商采用了吓唬用户的策略,他们暗示用户:把控制系统和安全系统结合到单一的可靠平台上将会使你的工厂处于“不安全”的状态。

  一些反对控制和安全结合技术的典型争论是这样的:

  “过程控制器不能被应用于安全保护功能。”这里指的不是设计用于安全应用、经过国际认可的认证机构(例如:T哣)认证的控制器和I/O模件,而是在安全应用中采用基本过程控制系统(BPCS)的控制器和I/O模件。
  “如果你没有采用三重化冗余的系统,那你就是在增加自己的风险。” 从逻辑控制器的角度看,一个三重化、四重化,甚至五重化的模件冗余系统也并不意味着一定能够达到所需要的降低风险的要求。实际上如果你去检查一下已经安装的双重化或是三重化模件冗余的系统,你会发现许多传感器和终端执行元件没有达到SIL(安全完整性等级)的SIF(安全仪表功能)要求。这是非常令人担忧的,因为大多数系统故障都是由于现场设备引起的,而不是由逻辑控制器造成的。冗余只是带来了可用性,而不是可靠性;所有安全系统都具备一定程度的冗余。三重化模件冗余系统采用冗余来降低发生危险事故的可能性。采用更新的技术可以设计出没有危险事故、诊断覆盖率接近100%的可靠系统。
  “把控制系统和安全系统结合在一起不是一种好的做法。” 但拥有双倍的工程工具,操作员界面,附加的系统元件以及全生命周期内双倍的培训、备品备件成本,肯定更不是好事情。在这类攻击组合系统的辩论中,有很重要的一点常常被忽视了——在大多数这类新系统中,你不需要把控制系统和安全系统结合到一起,因为这些系统都具有在同一个系统中实现过程控制和安全功能的能力;有些甚至可以在同一个控制器中实现,还具备自我管理的能力。
  把控制系统和安全系统结合起来的理由
  为什么要把安全和过程控制两个不同的领域结合在一起?因为这使最终用户可以在保持所需要的安全等级的同时减少费用。这样也可以在项目工程实施和测试阶段节约费用。例如在同一个系统中移动I/O点和在完全不同的系统之间移动I/O点,考虑到文档和设计等方面的影响,这项工作所需要的费用和工作量将会大大减少。
  在系统调试阶段也会有其它方面的费用减少,因为整个完整的系统可以在受控的环境下进行预先测试,这样就不会导致两个相互隔离的不同系统运到现场后才第一次对接。这样的预先测试还可以增强用户对所采用系统的了解,因而可以提高整个解决方案的完整性。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条