说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 超声波加载
1)  ultrasonic pressing
超声波加载
1.
Comparing the ultrasonic solidstate diffusion bonding process to the solid-state diffusion process at certain temperature and pressure,it appears that 1Cr18Ni9Ti and TC4 were bonded well through the ultrasonic pressing solid-state diffusion bonding process.
研究了1Cr18Ni9Ti与TC4异种金属的固态扩散焊接工艺,在现有的工艺方法上采用超声波加载固态扩散焊接的工艺,并对比超声波加载扩散焊接工艺与传统扩散焊接工艺。
2)  ultrasonic machining
超声波加工
1.
FEM Analysis on Ultrasonic Machining Mechanism;
超声波加工机理的有限元数值分析
2.
As a new precision machining,ultrasonic machining has been applied widely,especial in machining brittleness material,and has reach fine result.
超声波加工作为一种新型的精密加工方法被广泛应用于精密加工中,特别在硬脆材料的精密加工中取得了普通加工所不能达到的效果。
3.
Ultrasonic amplitude-bar is one of the most important parts in the ultrasonic machining equipments.
超声变幅杆是超声波加工装置中最主要的部件之一,其种类较多,且每一种类的各项参数计算较复杂和繁琐,给实际应用带来困难。
3)  Ultrasonic humidification
超声波加湿
4)  ultrasonic milling
超声波铣削加工
1.
This paper firstly analysed material removal mechanism of ultrasonic milling under three motions of tool oscillation and rotation simultaneously,and feed movement of th.
超声波铣削加工适于硬脆材料复杂型腔的加工,加工中影响材料去除率的因素很多,为了优化加工参数以及更好地控制加工过程,研究了各种加工参数对材料去除率的影响规律。
5)  ultrasonic vibration machining
超声波振动加工
1.
Taking ultrasonic vibration cutting (UVC) as an example, this paper puts forward a method of tuning automatically for ultrasonic vibration machining (UVM).
本文以超声波振动切削为例介绍了超声波振动加工中自动调谐技术的实现方法。
6)  ultrasonic humidifier
超声波加湿器
补充资料:超声信号的加权


超声信号的加权


超声学术语。超声检查中,对获得的信号进行变换,突出信号中的某些部分,抑制信号中的另一些部分的处理方法。方法是将信号中的不同部分乘以不同的权数。滤波就是加权的一个例子,其作用是突出信号中的一些频率成分;抑制另一些频率成分,又如在波束形成时,将各阵元的输出乘以不同的权数,也是一种加权。广义地说,滤波可称为频率域的加权,波束形成可称为空间域的加权,相关处理可称为时间域的加权。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条