1) thermal conducting filler
导热填料
1.
Nanocopper particles were prepared by evaporation in inert gas and arc plasma method,and used as thermal conducting fillers in a new nanocopper thermal silicone grease which has high coefficient of heat conductivity.
用惰性气体蒸发法和电弧等离子体法制备了纳米铜粒子,以此作为导热填料,研制出了具有高导热系数的新型纳米铜导热硅脂。
2.
The research of thermal conducting properties and mechanism of thermal conductive plastics and thermal conductive insulating plastics, and surface treatment of thermal conducting fillers were described, and selection and optimization of process technology were presented.
介绍导热绝缘及导热非绝缘塑料的导热性能、导热机理及导热填料粒子表面处理研究概况 ,并介绍了导热塑料的成型工艺条件选择及优化。
3) thermal conductive filler
导热填料
1.
The dispersion of some thermal conductive fillers and their effects on tanδ,heat build-up and thermal conductivity of the NR/BR vulcanizate were investigated.
研究了氧化锌、炭黑、石墨等几种导热填料对NR/BR硫化胶的生热和导热性能的影响。
2.
Thermal conductive mechanism of filling type thermal conductive silicone rubber and thermal properties of different thermal conductive fillers are reviewed.
综述了填充型导热橡胶的导热机理和各类导热填料的导热特性,介绍了提高导热硅橡胶导热性的途径。
4) thermal-conducting insulating filler
导热绝缘填料
1.
An adhesive material was developed in which E-44,a widely used epoxy resin was used as matrix,and silicon nitride,boron nitride,aluminum oxide and silicon carbide were used as thermal-conducting insulating fillers.
以环氧树脂E-44为基体,通过加入不同量和种类的导热绝缘填料氮化硅、氮化硼、氧化铝、碳化硅来调节胶粘剂的导热性能,通过加入不同量的增塑剂来调节胶粘剂的粘度和韧性以适应于工业化涂布生产。
5) conductive fillers
导电填料
1.
In this paper,three kinds of conductive adhesives were developed by using polyvinylidene fluoride(PVDF) as binding materials and carbon nanotubes(CNTS) graphite and carbon black acetylene as conductive fillers.
采用涂膜法制备了以碳纳米管(CNTS)、乙炔黑和石墨粉为导电填料的导电胶,研究了它们的电学性能、力学性能和粘结性能。
2.
The classification and properties of electromagnetic shielding conductive plastics are reviewed,with focus on properties of conductive fillers in compound conductive plastics.
论述了电磁屏蔽导电塑料的种类及其特性,重点介绍复合型导电塑料中导电填料的填充特性,并讨论了制备导电塑料的几种常用方法。
3.
The influences of dosage of conductive fillers on the conductivity of blend materials were dicussed,and mechanical properties of the blend materials relationship with dosage of cementitious.
本文介绍了材料的配制和性能,讨论了导电填料的含量与该材料导电性能之间的影响,以及水泥固体粉体含量与材料机械性能的关系。
6) conductive filler
导电填料
1.
Effect of conductive filler on the properties of epoxy resin conductive adhesive;
导电填料对环氧导电胶性能的影响
2.
The conductive rubber in electromagnetic interference shielding in the country and abroad was introduced by the different conductive fillers,especially the advanced research across the globe was analyzed.
从导电填料的角度分类介绍了国内外学者对导电橡胶在电磁屏蔽方面的相关研究,尤其对当前国外水平较高的研究进行了总结,并指出了导电填料的发展趋势。
3.
By adding conductive filler to get compound coatings,we studied the influence of polyaniline in the compound coatings′ conductivity.
并分别以丙烯酸树脂和掺杂态PANI/丙烯酸树脂为成膜基质,添加导电填料,制备出复合导电涂膜。
补充资料：填料函填料
分子式：
CAS号：
性质：又称填料函填料或螺旋盘根。主要用于填塞反应釜、搅拌器、泵等旋转轴或往复活塞杆及阀杆轴贯通处的填料函(stuffing box)，以抑止旋转或往复运动的轴杆处的低压蒸汽、气体、热水、溶液及各种介质的泄漏。常以棉麻、石棉、聚四氟乙烯、碳纤维、金属箔等单独或几种材料组合，经捻合、编织或与橡胶并用制成，为条状产品。横断面有正方形、梯形、圆形等，填料条按其截面大小绕成不同直径的螺旋状制品，使用时将其切断成适当周长的环，卷于轴的四周，依次塞入填料函中，用盖锁紧，完成密封。
CAS号：
性质：又称填料函填料或螺旋盘根。主要用于填塞反应釜、搅拌器、泵等旋转轴或往复活塞杆及阀杆轴贯通处的填料函(stuffing box)，以抑止旋转或往复运动的轴杆处的低压蒸汽、气体、热水、溶液及各种介质的泄漏。常以棉麻、石棉、聚四氟乙烯、碳纤维、金属箔等单独或几种材料组合，经捻合、编织或与橡胶并用制成，为条状产品。横断面有正方形、梯形、圆形等，填料条按其截面大小绕成不同直径的螺旋状制品，使用时将其切断成适当周长的环，卷于轴的四周，依次塞入填料函中，用盖锁紧，完成密封。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条