说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 循环深冷处理
1)  cyclic cryogenic treatment
循环深冷处理
1.
Microstructure and mechanical properties of high speed steel after cyclic cryogenic treatment;
高速钢循环深冷处理后的显微组织和力学性能
2)  thermal-cold cycling treatment
冷热循环处理
1.
Effect of thermal-cold cycling treatment on dimensional stability of SiCp/2024Al composite;
冷热循环处理对SiCp/2024Al尺寸稳定性的影响
2.
Thermal stress of SiC_P/2024Al composites under both water quenching treatment and thermal-cold cycling treatment are numerically simulated by Marc finite element software.
研究结果表明:热处理过程中,颗粒和基体的界面附近会产生很大的热应力场,并且在SiC颗粒的尖角处产生热应力集中;经淬火处理后的SiCP/2024Al复合材料的热残余应力与基体的屈服强度接近,但经过冷热循环处理后的SiCP/2024Al复合材料中的热残余应力明显降低。
3)  thermal cycling treatment
冷热循环处理
1.
Effects of the different range thermal cycling treatment on the mechanical properties of 50% AlN_p/Al composite fabricated by squeeze casting were investigated.
研究了 3种不同温差冷热循环处理对AlN颗粒增强铝基复合材料室温力学性能的影响。
4)  circulating cooling water treatment
循环冷却水处理
1.
The circulating cooling water treatment scheme was designed again for improving circulating cooling water treatment effect in Quxian Natural Gas Purification Plant.
为提高渠县天然气净化分厂循环冷却水处理效果 ,对原水处理方案进行了重新设计 ,改用多效水处理剂CT4 - 34和氧化型杀菌剂稳定性ClO2 、非氧化型杀菌剂CT4 - 4 1联合处理方案。
5)  recirculating cooling water treatment
循环冷却水处理
1.
The recirculating cooling water treatment of steam turbine set in heat power plant;
火电厂汽轮机组的循环冷却水处理
2.
The expert system approach and its performance for recirculating cooling water treatment are described.
本文首先介绍了敞开式循环冷却水处理中四个方面:腐蚀结污、沉积结垢、悬浮颗粒结污和微生物结污的概况、特点、产生原因、控制方法和监测项目。
6)  treatment of circulating cooling water
循环冷却水处理
1.
Application and Research of Ultrafiltration and Reverse Osmosis on Treatment of Circulating Cooling Water;
超滤反渗透在循环冷却水处理中的应用研究
补充资料:深冷处理
      将钢制品冷至 0℃以下温度的处理方法。广义而言,这也是一种金属热处理。深冷处理的主要目的是促使淬火后的钢中残留奥氏体转变为马氏体,使残留奥氏体量减到最低限度。最常采用深冷处理的是高碳高铬工具钢和高速工具钢。这些钢淬火后含大量残留奥氏体。如回火前在-72℃深冷处理,再施以二次回火,可大大提高工件的尺寸稳定性。其他采用深冷处理的材料还有铬轴承钢、量具用钢、表面渗碳钢、马氏体不锈钢、马氏体时效钢等。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条