说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 增量模型
1)  increment model
增量模型
1.
Research and Application of the Alternating Polarity Method based on Increment model;
基于增量模型的变极性测量方法的研究和应用
2.
Aiming at the need for 3D modeling of sophisticated weapon,the development methods of software engineering such as waterfall model,transform model and increment model were analyzed and compared,and the increment model was introduced into 3D modeling for weapon.
针对复杂武器3D实体建模的需求,分析并比较了软件工程化中的瀑布模型、变换模型和增量模型等3种模型开发方法,首次将增量模型方法引入到武器3D实体建模中。
3.
The advantage of applying the increment model into the development of a courseware is briefly discussed in this paper.
文章的最后指出了应用增量模型进行课件开发所需注意的问题。
2)  incremental model
增量模型
1.
Study on prediction of end point carbon content and temperature in EAF steelmaking by incremental model;
增量模型预报电弧炉终点碳含量及温度的研究
2.
Feature-based modeling for multi-resolution modeling process exists between the design of the incremental model for solving bound to repeat the inefficient and not practical problems.
针对多分辨率特征造型模型建模过程中存在的对增量模型设计之间约束重复求解的低效性与不实用性问题,提出了基于特征的多分辨率建模技术和LOD技术,通过约束控制管理,对增量模型进行并行设计,提高了实体模型设计与分析的效率。
3)  increment model
增量型模型
1.
The model-free learning adaptive control and its parameter adaptive predicting with parameter control length is presented for a class of nonlinear discrete-time systems with multiple time delays based on dynamic approximate linearization increment model in this paper.
对于一类常见非线性离散系统,提出了其动态线性逼近的增量型模型、无模型自适应控制律和带有参数限定时域长度的参数自适应预报递推算法,实现了对时滞非线性系统的无模型学习自适应控制。
2.
The model-free direct adaptive control and its parameter adaptive predicting with parameter control length is presented for a class of nonlinear discrete-time systems with multiple time delays based on dynamic approximate linearization increment model.
对于一类常见多重时滞非线性离散系统,提出了其动态线性逼近的增量型模型。
3.
In this paper, the model-free direct adaptive control and it s parameter adaptive predicting with parameter control length is presented for a class of nonlinear discrete-time systems with multiple time delays based on dynamic approximate linearization increment model.
对于一类常见多重时滞非线性离散系统,提出了其动态线性逼近的增量型模型、无模型自适应控制律和带有参数限定时域长度的参数自适应预报递推算法,实现了对时滞非线性系统的无模型自适应控制。
4)  total increment model
全增量模型
1.
In this paper, Using the input output table which is established for the enterprise, we put forward a mathematical model of economic analysis, named the total increment model.
借助编制的企业型投入产出表,提出一种经济分析的数学模型,称为全增量模型
5)  concrete with gentle volume expansion
增量型计算模型
1.
An incremental type of computing model for the volume expansion of concrete with gentle volume expansion is proposed.
微膨胀混凝土膨胀变形的变化规律比较复杂 ,目前多采用全量型计算模型 ,它难以反映膨胀变形的复杂规律 ,而增量型计算模型 ,可以较好地反映微膨胀混凝土十分复杂的变形规
6)  HCZ production-increasing model
HCZ产量增长模型
1.
Application of HCZ production-increasing model in super heavy oil recovery;
HCZ产量增长模型在超稠油开采中的应用
补充资料:AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率

开始
先看下最终效果




第一步,如图所示将窗口分为四个视图




第二步,依次选择每个窗口,在分别输入各自己的视图




第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图




第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:




第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:




第六步:画出螺栓的初步形状.如图




第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算





第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集




第九步:阵列




第10步.模型就完成了




来一张利用矢量处理的图片


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条