1) Balloon
[英][bə'lu:n] [美][bə'lun]
气囊
1.
Discussion on Size of Balloon of Indwelling Double Lumen Catheter in Cesarean Women;
剖宫产孕妇留置双腔导尿管气囊内注液量的探讨
2.
Clinical observation of two methods of managing artificial airway balloon;
两种人工气道气囊管理方法的临床效果观察
3.
【Objective】 We carried out experimental study in swine liver to study whether the ablation- separating balloon can be successfully protect the organ from burn of RFA.
【目的】探讨家猪射频消融临近胃肠肝组织时,消融阻隔气囊能否有效保护邻近胃肠。
2) airbag
[英]['ɛəbæg] [美]['ɛr,bæg]
气囊
1.
Wind-tunnel studies on the aerodynamics of drag parachutes and airbags;
阻力伞及气囊气动特性风洞试验技术研究
2.
Performance simulation test of the auto airbag based on MSC.DYTRAN;
基于MSC.DYTRAN的安全气囊性能仿真分析
3.
Segment structural calculation for airbag transported sinking pipes
气囊出运沉管管节结构计算
3) gasbag
[英]['gæsbæg] [美]['gæs,bæg]
气囊
1.
Development of Metal Bellows Loading Gasbag of Detaching Top Roller on CA 723 Comber;
CA-723型精梳机分离胶辊金属波纹管加压气囊的研制
2.
Measurement and analysis of the stress change of the structure during the ship launching by using gasbag;
船舶气囊下水过程结构应力变化的测试与分析
3.
Application of new technology for towing and launching of caissons with floating gasbag;
气囊助浮方法在沉箱溜放、拖运中的应用
4) bladder
[英]['blædə(r)] [美]['blædɚ]
气囊
1.
Missile cabin fabrication by bladder-assisted RTM;
气囊辅助RTM工艺成型导弹舱段构件
2.
Due the low fiber volume fraction of the composite skirt fabricated by vacuum-assisted resin transfer molding(VARTM),bladder-assisted RTM is suggested.
针对某型号上用VARTM工艺制造的复合裙纤维体积含量偏低的缺点,提出用气囊辅助RTM工艺制造该复合裙。
3.
Silicon rubber bladder-assisted RTM(SRBARTM) and VARTM were carried out to fabricate the skirt component in the paper respectively.
本文分别采用VARTM和硅橡胶气囊辅助RTM工艺来成型此裙段构件,进行了玻璃钢件的制备与考核。
5) air bag
气囊
1.
Measures to prevention the flotation of air bag in prestressed hollow plate beam construction;
预应力混凝土空心板梁防止气囊上浮的措施
2.
To solve the problem, we fix air bag system.
本系统针对这种情况,在汽车上装上气囊系统,汽车落水后自动打开气囊,利用其浮力使车浮上水面并自动扶正,为乘员安全逃生提供了机会。
3.
Research on the cushioning characteristic of air bag for the parachute air bag recovery system for the remotely piloted vehicle (RPV) is made.
用缓冲气囊的缓冲特性对无人机伞降气囊回收方式进行了研究，并以单个气囊为对象，分析了影响缓冲性能的主要因素，认为质量体积比ｍ ／ｖｉ 和排气口面积 Ａｎ 是决定缓冲效果的主要因素。
补充资料：气囊
分子式：
CAS号：
性质：又称风胎，气胎，气袋。硫化力车外胎用的、能传导空气压力的橡胶囊。通常用耐热性能好的橡胶制造。
CAS号：
性质：又称风胎，气胎，气袋。硫化力车外胎用的、能传导空气压力的橡胶囊。通常用耐热性能好的橡胶制造。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条