1) submerged arc welding
埋弧焊
1.
Electrode arc equation and thermodynamic analysis of submerged arc welding with constant current power supply;
自动埋弧焊接过程的电弧控制方程与热学分析
2.
Study on process properties of metal cored wire for stainless steel submerged arc welding;
不锈钢埋弧焊用金属芯焊丝工艺性能的研究
3.
New method of signal processing for weld tracking system of submerged arc welding;
新型埋弧焊焊缝跟踪系统的信号处理方法
2) SAW
[英][sɔ:] [美][sɔ]
埋弧焊
1.
Preclusion of Terminal Crack for Longitudinal Weld of PressureVessel During SAW;
压力容器筒体纵缝埋弧焊终端裂纹的预防
2.
Study of H bridge circuit in SAW wire feeding;
埋弧焊H桥送丝电路研究
3.
Improving shaping quality of SAW seam with pulse technique;
利用脉冲技术改善埋弧焊的焊缝成形质量
3) submerged-arc welding
埋弧焊
1.
A brief talk on the application of MAG welding and submerged-arc welding in box-type derrick;
浅谈MAG焊和埋弧焊在箱式井架的应用
2.
Design of Submerged-arc Welding Machine with Seam-tracking Controlled by One Chip Computer;
单片机控制带焊缝跟踪埋弧焊机设计
3.
Also,the principle and advantage of submerged-arc welding compared to stick welding is illuminated,the influence of welding flux,parameter,process to seam is analyzed.
设计的工频高压脉冲引弧器通过引入电磁干扰滤波器等完善措施,提高了焊缝合格率,消除了高频高压辐射对人体的伤害和周围设备的电磁干扰;列举了TIG焊机的故障及处理方法;简要概述了埋弧焊接的工作原理和相对于手工焊的优点;分析了焊剂、焊接规范、工艺等因素对焊缝的影响。
4) submerged arc weld
埋弧焊
1.
Regarding to submerged arc weld multi-pass weld track and height of weld gun,two-dimension track system is designed.
针对埋弧焊多道焊的焊缝跟踪以及焊枪高度跟踪问题,设计了一种二维跟踪系统。
2.
It states the flux affect on metal properties of submerged arc weld seam from flux composition,metal properties,chemical analysis,dissolve[O]contents etc.
从焊剂的组成、冶金性能、化学性能、溶解[O]含量等方面,阐述了焊剂对埋弧焊焊缝金属冶金性能的影响。
3.
The paper is about SUS304 submerged arc weld in welding material choice,mechanical properties test,hot cracking by Method of Rigid Restraint Cracking Test for Welding Butt Joint,loss of alloy element etc.
针对SUS30 4不锈钢埋弧焊在焊材选用、力学性能试验、刚性拘束下的开裂及合金元素烧损等问题进行了工艺试验和理论分析 ,解释了SUS30 4不锈钢埋弧焊中常见的几个问题 ,并为此类钢种的埋弧焊接提供了实践和理论依
5) submerged arc welding
埋弧焊接
1.
Effect of arc offset on the quality of submerged arc welding and improving measures of the welding technology;
弧偏吹对埋弧焊接质量的影响和焊接工艺改进措施
2.
Based on Buck DC/DC converter,an arc stability controller was designed for submerged arc welding(SAW).
基于Buck DC/DC变换器,设计了埋弧焊接(Submerged arc welding,SAW)过程的稳弧控制器。
6) Submerged arc welding wires
埋弧焊丝
1.
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ series in Wuhan Iron and Steel Corporation.
重点介绍武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与匹配的WQ系列桥梁钢埋弧焊丝研制进展情况。
2.
This article is focused on the progress in the development of bridge steel 14MnNbq and its matching submerged arc welding wires of WQ family in Wuhan Iron and Steel (Group) Corporation.
本文重点介绍了武钢首批试制的天兴洲大桥14MnNbq超厚板(60mm)与武钢技术中心开发研制的WQ系列桥梁钢埋弧焊丝匹配研制进展。
补充资料：埋弧焊
利用在焊剂层下燃烧的电弧进行焊接的方法（见图）。在焊接过程中,焊剂熔化产生的液态熔渣覆盖电弧和熔化金属，起保护、净化熔池、稳定电弧和渗入合金元素的作用。埋弧焊分为自动埋弧焊和半自动埋弧焊两种。前者应用较广泛,焊接电流可达600～2000安，焊接效率很高。埋弧焊是一种适于大量生产的焊接方法，广泛用于焊接各种碳钢、低合金钢和合金钢，也用于不锈钢和镍合金的焊接和表面堆焊。为了提高焊接效率和扩大使用范围，埋弧焊的电极可采用双丝、三丝、带极(用于堆焊)，还可在焊剂中添加金属粉等。焊剂层下的电弧与焊件接口的对正和调整，可用工业电视观察或用激光跟踪等方法探测。埋弧焊的焊接效率高,焊缝光洁，无飞溅，少烟尘，无电弧闪光，劳动卫生条件好，设备成本较低。缺点是限于平焊和长焊缝。与气体保护电弧焊相比，埋弧焊电弧不可见，接头装配要求较高，应用灵活性也较差。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条