说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 电弧压力
1)  arc pressure
电弧压力
1.
High-frequency pulse modulated variable polarity welding power and its arc pressure;
高频脉冲变极性焊接电源及电弧压力分析
2.
Analysis of twin-electrode TIG coupled arc pressure;
双钨极氩弧焊耦合电弧压力分析
3.
The results indicate that the T-TIG welding can avoid the defects of undercut and humping effectively in high current and high speed region on the basis of low arc pressure.
与常规钨极氩弧焊的对比分析表明,由于双钨极氩弧焊降低了电弧压力,提高了焊丝的熔敷率,因而在大电流高速度焊接时,极大地减少了凹坑、咬边等缺陷,实现了良好的焊缝成形,从而改善了常规钨极氩弧焊不适合大电流高速度焊接的不足,拓宽了钨极氩弧焊的使用范围,提高了焊接生产率。
2)  arc voltage
电弧电压
1.
The controlling research of arc voltage of shielded metal arc welding;
手工电弧焊电弧电压控制的研究
2.
Effect of arc voltage on arc stability of MIG welding;
电弧电压对混合气体保护焊电弧稳定性的影响
3.
Study on analyzing droplet transfer characterization by arc voltage fluctuation value;
电弧电压变化量分析熔滴过渡特征的研究
3)  arc voltage
弧压,电弧压降
4)  arcing voltage
起弧电压
1.
In order to solve the problem of high energy consumption in the process,the factors which affect arcing voltage of micro-arc oxidation on aluminum alloy were studied.
针对目前微弧氧化技术中存在的电能消耗高的问题,对影响铝合金微弧氧化起弧电压的因素进行了研究,分析溶液成分和含量、工艺条件等因素对起弧电压的影响。
2.
The influences of concentration of NaOH on the arcing voltages,characteristics of spark spot of the sample in microarc oxidation,the rate of c.
通过改变NaOH的浓度研究其对微弧氧化的临界起弧电压、微弧氧化过程中试样表面火花形态、陶瓷膜的生长速率及陶瓷膜厚度的影响。
5)  arc voltage
弧电压
1.
The torch can bring higher arc voltage with lower fluctuation by elongating the arc.
该喷枪能够提高电弧电压并减小电弧电压波动。
6)  arc starting voltage
启弧电压
补充资料:锅炉、压力容器、压力管道及特种设备定期检验


锅炉、压力容器、压力管道及特种设备定期检验
periodic inspection of boilers, pressure vessels, pressure piping and special equipment

  guolu YOli侧飞扣1 YOli gLJal对印ji tez陌叩劝以拍1 dingqi】,on四n锅炉、压力容器、压力管道及特种设备定期检验(peri诫c inspectionof城le。,p~切reves-Sels,p~二piPing ands衅过闪uiplr屺nt)为保证设备的安全使用,规定设备必须按一定周期进行法定的、强制性的检验。定期检验由政府设立的检验所、使用单位或行业检验站进行。检验单位及检验人员必须具有与所检设备相适应的资格。设备使用单位应该建立定期检验制度,做好检验计划,按时向检验单位提出申请。检验单位应该保证及时进行检验,检验按有关检验规则进行。检验时,设备使用单位应做好配合工作,提供必要的运行资料。检验完毕,检验单位要出具检验报告,对设备能否使用,要作出明确结论。如设备有缺陷,要提出是否修理、监护使用和报废的处理意见。锅炉压力容器安全监察机构根据检验机构的报告,发使用许可证书。有缺陷的,责令使用单位修理,修理后检验仍不符合安全要求的,则通知报废。使用单位逾期不进行定期检验,锅炉压力容器安全监察机构有权停止其设备运行。(陈亦惠)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条