说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 挤出模
1)  extrusion die
挤出模
1.
Design of extrusion die for PA66 hollow profile shapes part;
PA66中空异型材挤出模设计
2.
Optimization design method of extrusion die for complex profile;
复杂型材挤出模结构优化设计方法
2)  extruding die
挤出模
1.
A special kind of extruding die was designed for the interventional catheter.
针对介入导管的特点设计了其专用挤出模,并选择UGNX2。
2.
By the integrated information platform of network technology, intelligentized Local Area Network (LAN) system of ERP and paralleled engineering CAD/CAE/CAM, as well as the application of CAD/CAE/CAM/ERP on extruding die design and manufacture are analyzed.
通过构建基于网络技术的综合信息平台、基于ERP和基于并行工程的CAD/CAE/CAM系统的智能化局域网络系统,分析CAD/CAE/CAM/ERP在挤出模设计及制造中的应用。
3.
Simultaneously unified extruding die structure characteristics,proposed a new design mentality, mainly elaborated the new mentality realizes feasibility and possibility.
同时结合挤出模具自身特点,由此提出新的设计思路,主要阐述了新思路实现的可行性和可能性。
3)  extrusion tooling
挤出模
1.
In view of the characteristics of the plastics profile extrusion tooling that there existing a lot of standard parts,a 3D standard-part database for plastic profile extrusion tooling was built on the platform of UG by using the VC++6.
针对塑料异型材挤出模中存在大量标准件这一特点,以UG软件为开发平台,利用VC++6 0面向对象的编程技术,在UG/OpenAPI开发平台上,创建参数化图库、设计用户界面、实现参数化尺寸驱动,总结了系统的主要功能和特点,建立了三维塑料异型材挤出模的标准件库。
2.
A model for describing the flowing uniformity of melt plastics in the head runner of extrusion tooling was built.
建立了塑料熔体在异型材挤出机头流道中的流动均匀性模型 ,阐明了模具结构参数与流动均匀性间的关系,确定了塑料挤出模优化设计的目标函数和设计变量 ,并将一种改进的模拟退火算法用于流线型塑料异型材挤出机头的优化设计。
3.
A primary research in the computer-aided design of the functional blocks of the extrusion tooling for plastic profiles used for construction was made through the development of the software.
通过软件的开发 ,对建筑用塑料异型材挤出模中功能块的计算机辅助设计进行了初步的探索。
4)  extrusion die
挤出口模
1.
Numerical simulation of three dimensional viscoelastic polymer melt flow through the extrusion die with an L-shaped cross section;
聚合物熔体在L型异型材挤出口模内三维粘弹流动数值模拟~*
2.
Determination of entry region length for extrusion dies;
粘弹性流体在挤出口模中入口区长度的确定
3.
Optimization Design of Extrusion Die Channels for Plastic Profile based on the CAD/CAE/ERP
基于CAD/CAE/ERP塑料异型材挤出口模流道优化设计
5)  Extrusion Mould
挤出模具
1.
It was pointed out that the function of profile and the tractability of the extrusion mould must be considered when we designed the profile section.
指出塑料异型材截面设计时要从保证制品的功能性及挤出模具的易加工性等方面加以考虑。
2.
On the basis of analyzing the section shape of heat insulating strip profile and the extrusion property of primary materials, the shape of die, streamline form of flow passage and structure of extrusion mould are designed.
通过对隔热条异型材截面形状及原材料挤出成型性能的分析 ,设计了异型材挤出口模形状、流线形流道及挤出模具结构。
3.
Application of modular design in extrusion mould design of plastic profiles was discussed, and a practical method was put forward in order to improve the quality and efficiency of design.
探讨了模块化设计在塑料异型材挤出模具设计中的应用。
6)  Extrusion Die
挤出模头
1.
Study on Stability of Extrusion Dies with Incoordinate Depth of Plastic Profiles;
不等壁厚塑料异型材挤出模头稳定性的研究
补充资料:挤出模塑法
分子式:
分子量:
CAS号:

性质:又称挤塑(法)、挤出模塑法和挤出成型法。热塑性塑料和橡胶主要加工成型方法之一。将原料由挤压机的加料漏斗连续加入加热的料筒中,软化后借料筒内螺旋杆的作用,电机头口型挤出,经冷却定形,成为一定形状的连续制品,如管、棒、板等。主要用于塑料工业、橡胶工业和铅笔工业等,一些化学纤维的熔体纺丝也用挤出机向喷丝头供料。电缆的绝缘套和汽车内胎等,也可用本法制成。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条