1) Al-1%Si alloy
Al-1%Si合金
1.
Research on Horizontal Continuous Casting Al-1%Si Alloy Wire Materials under Outfield Treatment;
外场作用下水平连铸制备Al-1%Si合金线材的研究
2.
The effect of high-intensity ultrasonic treatment on the solidified microstructure of horizontal continuously cast Al-1%Si alloy was investigated, and the mechanism of the treatment was studied.
研究了Al-1%Si合金水平连铸过程中施加功率超声对铸坯凝固组织的影响,并对其机理进行了探讨。
3.
The effect of process parameters of continuous casting with heated mould such as mould temperature,casting speed and cooling capability on surface quality of Al-1%Si wire was analyzed by the study of the fabricating of Al-1%Si alloy wire on the self-made horizontal heated-mold continuous casting equipment.
通过在自行研发的水平式热型连铸设备上制备Al-1%Si合金线材的试验研究,分析型口温度、连铸速度及冷却能力等工艺参数对铸锭表面质量的影响,提出了制备Al-1%Si合金的优化工艺参数。
2) Al-1%Si bar
Al-1%Si合金棒材
3) Al-Si alloy
Al-Si合金
1.
Simulation of mold filling and solidification on gravity casting of Al-Si alloy(A357);
Al-Si合金(A357)重力铸造充型及凝固过程模拟
2.
Electromagnetic Separation of Magnetic Impurity Particles in Al-Si Alloy Melt;
Al-Si合金熔体中磁性杂质颗粒的电磁分离
3.
Effects of high magnetic fields on the distribution of Si in solidified structures of Al-Si alloy;
强磁场对Al-Si合金凝固组织中硅分布的影响
4) Al-Si alloy
Al-Si 合金
1.
Micro-arc oxidation coatings were prepared on Al-Si alloy surface using own made micro-arc oxidation device.
采用自制的微弧氧化装置,在 Al-Si 合金表面制备了微弧氧化涂层,在对涂层进行表征的基础上,进行了其往复滑动的摩擦磨损性能研究。
5) Al Si alloy
Al-Si合金
1.
Fe and Ni with high melting points can be melted directly into the surface of Al Si alloy by Argon arc.
利用氩弧将高熔点的铁、镍直接熔入 Al-Si合金表面 ,经重熔后获得组织均匀的表面合金化层 ,合金化层的深度约 5 mm。
2.
Mn is added into Al Si alloy containing Fe, then cast into sample and weld wire.
在含 Fe的 Al-Si合金中加入 Mn元素 ,铸成试样和焊丝 。
3.
The testing results showed that a significant modifying effect can be achieved in eutectic Al Si alloy in die casting by the addition of w(RE) being 0.
8%的稀土对共晶Al-Si合金具有良好的变质效果 ,而在 960～ 10 60℃下的过热处理能使 RE变质后的共晶 Al-Si合金中的 Si相进一步细化 ,从而获得良好的凝固组织。
6) Al-Si alloys
Al-Si合金
1.
A Study on the Grown Morphologies of Eutectoid Silicon in Al-Si Alloys;
Al-Si合金中共晶硅生长形态的研究
2.
Experimental study on heat transfer performance of Al-Si alloys used in solar thermal power generation
太阳能热发电用Al-Si合金的传热性能试验
3.
As advanced alloys used in piston,Al-Si alloys were used to produce combustion engine extensively.
Al-Si合金常作为一种高质量活塞合金广泛应用于内燃机生产中,在Al-Si活塞合金中添加稀土元素可以明显改善合金的机械力学性能和铸造加工性能。
补充资料：emery(containing less than 1% quartz)
CAS：12415-34-8
中文名称：金刚砂,刚玉
英文名称：emery；emery(containing less than；emery(containing less than 1% quartz)；emery(containinglessthan1%quartz)
中文名称：金刚砂,刚玉
英文名称：emery；emery(containing less than；emery(containing less than 1% quartz)；emery(containinglessthan1%quartz)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条