说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> Ni-W-P合金镀层
1)  Ni-W-P alloy coating
Ni-W-P合金镀层
1.
Study on the properties of Ni-W-P alloy coating;
Ni-W-P合金镀层性能研究
2.
The test results show that the Ni-W-P alloy coatings adhere to the substrate very well and have no pore when coating thickness reaches 15μm.
93wt%的Ni-W-P合金镀层
2)  Electroless Ni-W-P alloy coating
化学镀Ni-W-P合金镀层
1.
Electroless Ni-W-P alloy coating with strong corrosion resistance and high hardness has a wide range of applications and is easy to form amorphous structure.
化学镀Ni-W-P合金镀层易形成非晶态结构,具有较强的耐腐蚀性及较高的硬度,应用范围十分广泛。
3)  Ni-W-P coating
Ni-W-P镀层
4)  Ni-W alloy coatings
Ni-W合金镀层
1.
The effect of Tungsten on the microstructure of Ni-W alloy coatings prepared by the pulse electrodeposition technology is firstly investigated by X-ray Diffraction.
利用脉冲电沉积的方法制备了Ni-W合金镀层,在微观形貌上与用直流电沉积方法得到的镀层进行比较。
2.
Ni-W alloy coatings are prepared by pulse electrodeposition.
利用脉冲电沉积方法制备了Ni-W合金镀层,观察了该镀层在不同载荷下的摩擦磨损行为,探讨了该合金镀层的摩擦磨损机理,并与45钢进行了对比试验。
3.
Ni-W alloy coatings with excellent hardness, wear resistance and appearance produced by electrodeposition were introduced in this dissertation.
本文用电沉积方法制备了具有良好硬度、耐磨性和外观质量的Ni-W合金镀层。
5)  Ni-Fe-W alloy coatings
Ni-Fe-W合金镀层
1.
A new Ni-Fe-W alloy coatings were obtained by pulse electrodeposition,the effect of W in the electrolyte contents on the structure of coatings,and the effect of the electrolyte contents on the hardness and thickness of coatings were discussed.
利用脉冲电沉积的方法制备了Ni-Fe-W合金镀层,讨论了镀液中W的含量对Ni-Fe-W合金镀层组织结构的影响,以及镀液成分对镀层硬度及厚度的影响。
2.
Then,the effects of the concentration of NiSO_4·6H_2O、Na_2WO_4·2H_2O、FeSO_4·7H_2O and temperature on the quality of Ni-Fe-W alloy coatings are also addressed.
并采用正交实验的方法研究了主盐浓度以及温度对脉冲电沉积Ni-Fe-W合金镀层的影响,通过对硬度、沉积速度以及外观的分析,筛选出了最佳的工艺条件。
6)  Ni-W-P/ Ni-P alloy coating
Ni-W-P/Ni-P合金层
补充资料:Ni3Al基金属间化合物高温合金


Ni3Al基金属间化合物高温合金
Ni_(3)Al-base intermetallic compound superalloy

  N一3AIJ一J旧shuJ一an huahewu goowen heJ一nNi3AI基金属间化合物高温合金(Ni3AI一baseintermetallie eompound superalloy)以Ni3AI相为基体的金属间化合物高温合金。Ni3AI作为高温合金材料中的强化相口)早已被人们所熟知。单晶Ni3AI有较好的室温塑性和加工性,但多晶Ni3AI在室温的塑性儿乎为零。1979年,日本和泉修等发现,添加微量硼可使Ni3AI韧化。硼强烈地偏聚于晶界,从而提高晶界的结合强度并使晶界区无序化,因此提高了晶界区塑性变形能力,使Ni3AI的室温拉伸伸长率可达50%以上。纯净N珠AI的室温、高温强度偏低,与高温合金相比需要进一步提高。固溶强化(见高温合金固溶强化)是提高强度的一条有效途径。Ni3AI可以固溶很多元素,其中以错和铅的强化效果最显著。美国橡树岭国家试验室已发展了一系列含铬、错、错等元素的Ni3AI基金属间化合物高温合金,具有良好的强度、塑性和高温抗氧化性。中国也对Ni3AI基合金进行了深入研究,并添加微量镁显著改善了热加工塑性。Ni3AI基合金可能是最先在工业上得到使用的金属间化合物高温合金之一,已制成各种部件在试用,如汽轮机和柴油机的耐热部件、高温模具、加热元件以及航空用的紧固件等。 〔邹敦叙)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条