1) polyalkylenesulfide
聚硫醚橡胶
2) polysulfide
[英][,pɔli'sʌlfaid] [美][,pɑli'sʌlfaɪd]
聚硫橡胶
1.
The process and kinetics of thermal degradation in a series of polysulfide-based polyurea were studied by TG,DTA and ATR-IR.
对一系列聚硫聚氨酯(脲)的热降解进行了研究,由异佛尔酮二异氰酸酯(IPDI)、甲苯二异氰酸酯(TDI)、液体聚硫橡胶(LP)以及2,5-二氨基-3,6-二甲硫基甲苯(E300)合成聚硫聚氨酯脲,用TG、DTA、ATR-IR等研究其热降解性能。
2.
The reaction mechanism including the modification of epoxy,silicone,phenolic and polysulfide,and the performance s changes of modified polyurea were reviewed.
综述了喷涂聚脲弹性体的改性方法,重点介绍了环氧树脂、有机硅、酚醛树脂、液态聚硫橡胶改性喷涂聚脲弹性体的反应机理及改性后材料的性能变化特点。
3.
The commonly used elastic impression materials in clinic are alginate hydrocolloid impression material,agar hydrocolloid impression material,silicone impression material,polyether impression material and polysulfide impression material.
临床常用的口腔弹性印模材料有藻酸盐水胶体印模材料、琼脂水胶体印模材料、硅橡胶印模材料、聚醚橡胶印模材料和聚硫橡胶印模材料。
3) polysulfide rubber
聚硫橡胶
1.
Research on the elastic abrasive performance of the alloying system of polysulfide rubber,epoxy resin and brown corundum;
聚硫橡胶/环氧树脂/棕刚玉共混体系弹性磨具性能的研究
2.
Study on toughening of epoxy resin with polysulfide rubber;
聚硫橡胶增韧环氧树脂研究
3.
Effect on toughening epoxy adhesive with polysulfide rubber
聚硫橡胶对环氧胶粘剂的增韧作用研究
4) thiokol rubber
聚硫橡胶
1.
One method to improve efficiently polyaniline's electrochemical catalysis and anti corrosion performance is to coelectropolymerize polyaniline and thiokol rubber in the non aqueous solution.
利用循环伏安、交流阻抗和动电位扫描 ,研究了聚苯胺 /聚硫橡胶复合修饰电极在半胱氨酸的硫酸溶液中对含有 S— S键的电化学反应的电催化作用及复合膜对碳钢的防腐作用和它本身的稳定性 。
2.
A series of polyaniline/thiokol rubber(PAn/TR)composite films has been prepared by electrochemical polymerization in one_step process in the solutions containing aniline and thiokol rubber prepolymer.
以苯胺、聚硫橡胶预聚体为主要原料，采用电化学一步法原位复合，制备了聚苯胺／聚硫橡胶复合膜。
3.
A novel class of conducting polypyrrole/thiokol rubber composite films were prepared by electrochemistry via one step process from the MeCN solution containing thiokol rubber with electronic active group(SH), pyrrole and trichloroacetic acid(TCA).
利用带有电活性端基（－ＳＨ）的液体聚硫橡胶与吡咯单体在以三氯乙酸（ＴＣＡ）作增溶剂兼支持电解质的乙腈溶液中一步电化学氧化复合，制备了一类新型的聚吡咯／聚硫橡胶导电复合膜。
5) polysulfide polysulphie rubber
聚硫化橡胶
6) CO
均聚型氯醚橡胶
1.
The effect of TMTD on the curing behaviour,physical properties,heat aging property and permanent set at high temperature of CO/ECO was investigated.
研究促进剂TMTD用量对均聚型氯醚橡胶 (CO) /共聚型氯醚橡胶 (ECO )并用胶硫化特性、物理性能、耐热老化性能和高温压缩永久变形的影响。
补充资料：氟醚橡胶
分子式：
CAS号：
性质：全氟烷基乙烯基醚、四氟乙烯和少量含硫化点单体组成的三元共聚弹性体。耐化学药品性优异，除氟化溶剂外，不受任何介质影响，与聚四氟乙烯相似。耐热性好，288℃下长期使用，短期使用温度高达315℃，脆性温度-39℃，物理机械性能与氟橡胶26相似，化学药品性和气体的渗透性小，电性能好。适用于耐高温耐强腐蚀介质，耐极大多数溶剂的橡胶密封剂和橡胶制品。
CAS号：
性质：全氟烷基乙烯基醚、四氟乙烯和少量含硫化点单体组成的三元共聚弹性体。耐化学药品性优异，除氟化溶剂外，不受任何介质影响，与聚四氟乙烯相似。耐热性好，288℃下长期使用，短期使用温度高达315℃，脆性温度-39℃，物理机械性能与氟橡胶26相似，化学药品性和气体的渗透性小，电性能好。适用于耐高温耐强腐蚀介质，耐极大多数溶剂的橡胶密封剂和橡胶制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条