1) concentrated emulsion polymerization
超浓乳液聚合
1.
Research status of stability of concentrated emulsion polymerization system;
超浓乳液聚合体系稳定性的研究
2.
The concentrated emulsion polymerization using nonionic polymerizable polyurethane (PUAG)/ styrene (St) as mixture monomers was studied.
研究了以非离子型可聚合聚氨酯(PUAG)和苯乙烯(St)为混合单体的超浓乳液聚合,并且考察了n(NCO)/n(OH)摩尔比、复合乳化剂体系质量浓度[E]、不同乳化剂的种类、引发剂质量浓度[I]、单体体积分数(或分散相体积分数,也称内相比Φ)、聚合温度等因素对聚合稳定性、动力学的影响。
3.
The molecular weight distribution, conversion rate, particle size, shape and distribution of the concentrated emulsion polymerization system were studied.
讨论了超浓乳液的相行为与稳定性及各自的影响因素,总结了超浓乳液聚合的相对分子质量分布、转化率与乳胶粒子大小及形态的影响因素。
2) concentrated emulsion polymerization
浓乳液聚合
1.
Porous TiO2 monolithic ceramic was prepared via sol-gel method using polymer foam as template,which was polymerized through concentrated emulsion polymerization.
采用浓乳液聚合方法制备出多孔聚合物结构材料作为模板,通过溶胶-凝胶法,将异丙醇钛的异丙醇溶液多次浸泡聚合物泡孔材料制备出了尺寸为毫米级的多孔氧化钛陶瓷材料。
2.
The polymer foam polymerized via concentrated emulsion polymerization was immerged in a solution of titanium (IV) isopropoxide in 2-propanol, which underwent a sol-gel process.
采用浓乳液聚合方法制备了聚苯乙烯和聚丙烯酰胺聚合物泡孔材料，用此泡孔材料作为制备多孔陶瓷材料的模板，通过溶胶—凝胶工艺，制备出了孔结构可以有效调节的多孔陶瓷材料。
3.
Rigid and flexible polymer particles were successfully produced by concentrated emulsion polymerization.
采用浓乳液聚合方法分别制备了刚性和弹性的聚合物异形粒子,讨论了制备过程中分散相体积分数、交联剂的用量、连续相中硅胶含量等参数对聚合物异形粒子形态的影响,并对异形粒子的形态及其应用进行了表征。
3) concentrated emulsion copolymerization
超浓乳液共聚
1.
Study on the stability of PUAG-St concentrated emulsion copolymerization;
PUAG-St超浓乳液共聚稳定性的研究
4) concentrated emulsion
超浓乳液
1.
Formation, nature and application of concentrated emulsion;
超浓乳液的形成、性质及应用
2.
Stable concentrated emulsion of MMA/BMA/St was prepared by using sodium dodecyl sulfate(SDS) and hexadecamol(HD) as the compound emulsifier, with Azobisisobutyronitrile(AIBN) as initiator, the concentrated emulsion was polymerized at 40 ℃～45 ℃ which the volume fraction of the dispersed phase can be over 85%.
以十二烷基硫酸钠(SDS)和十六醇(HD)为复合乳化体系,偶氮二异丁腈(AIBN)为引发剂,甲基丙烯酸甲酯(MMA)/甲基丙烯酸丁酯(BMA)/苯乙烯(St)为混合单体,在40℃~45℃引发聚合,制备了分散相占85%以上的稳定超浓乳液。
3.
In this paper,the definition and preparation of concentrated emulsion wereintroduced.
本文主要介绍了超浓乳液的定义和制备方法。
5) ultrasonically emulsion polymerization
超声波乳液聚合
6) super-concentrated polymerization
超浓聚合
补充资料：浓福
1.厚福。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条